Job Requirements
WA
Secret Polygraph Unspecified
Career Level not specified
Salary not specified
Join Premium to unlock estimated salaries 
Job Description
Duties
A WG-6610-9, SMALL ARMS REPAIRER:
Requirements
Conditions of employment
MILITARY REQUIREMENTS :
Military Grades: E1 - E9, WO1
Desired Military Assignments: 94/25/91/92/12/88/913/915/948/922 Series
- Applicants need not be assigned to the position or possess the MOS to apply or be considered for selection. Selected applicant must be assigned to a compatible Military position and attain MOS within 1 year of appointment action.
- May be required to successfully complete a trial period.
- Participation in direct deposit is mandatory.
- All soldiers, civilian employees, and contractor employees who drive Army-owned or leased vehicles must complete the Army Avoidance Course (AAC) training when they start working for the Army. Must have a valid Washington state and military driver's license. Must be able to obtain a Government Travel Card (GTC) and be able to attend all schools deemed necessary by the supervisor.
- Males born after 31 December 1959 must be registered for Selective Service.
- Must maintain membership in the WA Army National Guard for continued employment.
- Must be able to obtain and maintain the appropriate security clearance of the position.
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- Position requires ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
- May occasionally be required to work other than normal duty hours; overtime may be required.
- The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
Qualifications
GENERAL EXPERIENCE :
Experience or training which demonstrates a working knowledge to read and interpret instructions, repair manual, specifications, and drawings; must have a knowledge of shop mathematics sufficient to use testing devices and measuring instruments; and be proficient in the use and maintenance of hand tools and equipment.
SPECIALIZED EXPERIENCE :
Must have at least 18 months experience or training with substantial mechanical skill is required to effectively and efficiently repair, overhaul, and rebuild small arms for both conventional uses and for weapons involving accurizing. Experience to inspect, diagnose malfunctioning, wear and/or damage is required. The ability to perform accurizing procedures on weapons to improve their performance is required. Basic knowledge of other trades to modify and/or manufacture weapons parts for accurizing is required. Experience to apply technical manuals, regulations, specifications and drawings to determine operation, assembly, and tolerances of the variety of weapons worked on is required for successful performance. Experience using and maintaining a variety of hand and power tools and gages is required. Tools include drills, files, precision gages and measuring instruments, magnafluxing equipment and/or borescopes to determine when parts are worn or damaged beyond acceptable tolerances.
Education
Education Requirements:
High School Diploma or GED
Degree Required: N/A
Degree Required to qualify with Education Only (No Specialized Experience): N/A
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
If you are selected for a vacancy that requires a specific degree and/or coursework you will be required to provide official transcripts prior to appointment.
Substitution of Education for Specialized Experience:
Not Applicable.
Additional information
*ALL SOLDIERS, CIVILIANS EMPLOYEES WHO DRIVE ARMY-OWNED OR LEASED VEHICLES MUST HAVE A CURRENT & VALID DRIVER'S LICENSE. MUST HAVE OR BE ABLE TO OBTAIN A GOVERNMENT TRAVEL CARD. MUST ATTEND, AND SUCCESSFULLY COMPLETE ALL SCHOOLS DEEMED NECESSARY FOR THE POSITION
- Certain incentive(s) may be available pending funding and approval but are not guaranteed.
- If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
- Military Technicians are ineligible for enlistment, retention, and student loan repayment bonuses. Acceptance of a Technician position will terminate these incentives.
- Military Technicians in the excepted service will wear the appropriate uniform while performing as a Technician.
- Veteran's preference does not apply to National Guard Technician positions in accordance with Title 32 USC 709 (f).
- May be required to successfully complete a trial period.
EQUAL OPPORTUNITY :
The WA National Guard is an equal opportunity employer and does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service or other non-merit factor.
If you are unable to upload a document online please send the document via email to our .
A WG-6610-9, SMALL ARMS REPAIRER:
- Performs accurization of national match weapons (pistols, rifles, and light machine guns) on a limited basis. Accurization involves altering and refining mass-produced weapons for use in national competition, by increasing their accuracy and reliability beyond factory specifications. This process involves selecting, fitting, and altering parts to improve the weapon. Altering includes peening, bending, filing, grinding, and the use of lapping compound to alter parts such as individual slide, receiver, sear, disconnector, barrel, barrel bushing, magazine, hammer, recoil spring, flash suppressor, operating rod spring guide, gas cylinder, stock, and the spindle valve.
- Disassembles weapons, assemblies, subassemblies and other components. Examines for defects, misalignment and malfunctions. Replaces barrels, firing pins, springs, trigger mechanisms, shell ejectors, and other parts and assemblies. Modifies small weapons by replacing worn or obsolete parts and using hand and power tools, precision gauges, test instruments, jigs and alignment devices in making repairs, modifications, and adjustments. Applies final finishes and test fires and/or performs operational checks of arms repaired to ensure safety, accuracy, and ease of operation.
- Performs overhaul, maintenance, and repair on a variety of small arms. Diagnoses and identifies mechanical deficiencies and/or malfunctions in weapons including: automatic pistols, revolvers, shotguns, automatic rifles, grenade launchers, machine guns, and rocket launchers, and other small arms and accessories.
- Uses micrometer to measure altered tolerances and makes additional adjustments as required. Anneals certain parts until the proper temper of the metal is obtained. Selects certain parts of specific hardness by researching characteristics of various metals in technical manuals. Uses pre-set specifications to ensure that critical operating tolerances are met. Test fires weapons to ensure that they meet desired performance requirements.
- Is responsible for accountability, storage and security of arms and other sensitive items while they are kept for repair, usually in vaults with limited access.
- May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT).
- Other duties as assigned.(temporary, minor, or incidental tasks)
Requirements
Conditions of employment
MILITARY REQUIREMENTS :
Military Grades: E1 - E9, WO1
Desired Military Assignments: 94/25/91/92/12/88/913/915/948/922 Series
- Applicants need not be assigned to the position or possess the MOS to apply or be considered for selection. Selected applicant must be assigned to a compatible Military position and attain MOS within 1 year of appointment action.
- May be required to successfully complete a trial period.
- Participation in direct deposit is mandatory.
- All soldiers, civilian employees, and contractor employees who drive Army-owned or leased vehicles must complete the Army Avoidance Course (AAC) training when they start working for the Army. Must have a valid Washington state and military driver's license. Must be able to obtain a Government Travel Card (GTC) and be able to attend all schools deemed necessary by the supervisor.
- Males born after 31 December 1959 must be registered for Selective Service.
- Must maintain membership in the WA Army National Guard for continued employment.
- Must be able to obtain and maintain the appropriate security clearance of the position.
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- Position requires ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
- May occasionally be required to work other than normal duty hours; overtime may be required.
- The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
Qualifications
GENERAL EXPERIENCE :
Experience or training which demonstrates a working knowledge to read and interpret instructions, repair manual, specifications, and drawings; must have a knowledge of shop mathematics sufficient to use testing devices and measuring instruments; and be proficient in the use and maintenance of hand tools and equipment.
SPECIALIZED EXPERIENCE :
Must have at least 18 months experience or training with substantial mechanical skill is required to effectively and efficiently repair, overhaul, and rebuild small arms for both conventional uses and for weapons involving accurizing. Experience to inspect, diagnose malfunctioning, wear and/or damage is required. The ability to perform accurizing procedures on weapons to improve their performance is required. Basic knowledge of other trades to modify and/or manufacture weapons parts for accurizing is required. Experience to apply technical manuals, regulations, specifications and drawings to determine operation, assembly, and tolerances of the variety of weapons worked on is required for successful performance. Experience using and maintaining a variety of hand and power tools and gages is required. Tools include drills, files, precision gages and measuring instruments, magnafluxing equipment and/or borescopes to determine when parts are worn or damaged beyond acceptable tolerances.
Education
Education Requirements:
High School Diploma or GED
Degree Required: N/A
Degree Required to qualify with Education Only (No Specialized Experience): N/A
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
If you are selected for a vacancy that requires a specific degree and/or coursework you will be required to provide official transcripts prior to appointment.
Substitution of Education for Specialized Experience:
Not Applicable.
Additional information
*ALL SOLDIERS, CIVILIANS EMPLOYEES WHO DRIVE ARMY-OWNED OR LEASED VEHICLES MUST HAVE A CURRENT & VALID DRIVER'S LICENSE. MUST HAVE OR BE ABLE TO OBTAIN A GOVERNMENT TRAVEL CARD. MUST ATTEND, AND SUCCESSFULLY COMPLETE ALL SCHOOLS DEEMED NECESSARY FOR THE POSITION
- Certain incentive(s) may be available pending funding and approval but are not guaranteed.
- If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
- Military Technicians are ineligible for enlistment, retention, and student loan repayment bonuses. Acceptance of a Technician position will terminate these incentives.
- Military Technicians in the excepted service will wear the appropriate uniform while performing as a Technician.
- Veteran's preference does not apply to National Guard Technician positions in accordance with Title 32 USC 709 (f).
- May be required to successfully complete a trial period.
EQUAL OPPORTUNITY :
The WA National Guard is an equal opportunity employer and does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service or other non-merit factor.
If you are unable to upload a document online please send the document via email to our .
group id: DOA