Job Requirements
CO
Secret Polygraph Unspecified
Career Level not specified
Salary not specified
Join Premium to unlock estimated salaries 
Job Description
Duties
Tests and troubleshoots aircraft rotor and/or propeller systems using special tools and test equipment. Diagnoses any malfunctions of rotor/propeller systems and makes necessary repairs. Performs troubleshooting of the powertrain systems using special tools and test equipment, diagnoses any system malfunctions and makes necessary repairs. Subjects rotor, propeller, and powertrain parts to a variety of nondestructive testing to identify imperfections not otherwise detected. Utilizing power hoists, special slings and balancing equipment, aligns and balances assembled propellers/rotor blades by making appropriate linkage adjustments and by making both chordwise and spanwise weight adjustments to bring blades into true balance. After assembly or installation of the blade systems on the aircraft, makes final adjustments to balance, track, eliminate vibrations and ensure proper revolutions per minute (RPM) by checking blade track utilizing special tracking equipment and making weight, trim tab, and control linkage adjustments. Performs operational checks of installed aircraft blades and associated sub-systems both inflight and during aircraft maintenance ground runs. Wears and utilizes appropriate safety equipment and follows pertinent safety precautions. May be required to serve, if employed in an AVCRAD, on maintenance assistance and instruction teams (MAIT) and CONTACT Teams throughout supported area. Performs other duties as assigned.
Requirements
Conditions of employment
Military Grades: E-4 thru E-7
1. Specialized experience will be used to determine qualifications for the announced position.
2. An applicant's RESUME must provide, in detail, how they meet each specialized experience listed below. Resume must be two pages or less.
3. It must be documented with "from (mm/yy)" and "to (mm/yy)" dates and description of the specialized experience.
DO NOT copy each bullet listed below word for word and place into your resume; you must describe your personal experience as it pertains to each bullet.
You will be immediately disqualified if you fail to include specialized experience in your resume.
Must have at least 18 months of experience in each of the following :
1. Experience performing standard, routine assembly and disassembly operations and making prescribed modifications to aircraft propellers, assemblies, and accessories.
2. Experience performing maintenance overhaul, troubleshooting, testing, and repair of aircraft propellers, components, for rotary wing
aircraft.
3. Experience determining maintenance needed from work orders, inspectionreports, historical record, and by own diagnosis.
Education
Education cannot be substituted for Specialized Experience for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
1. If you would like to inquire about joining the Colorado Army National Guard, please contact (720) 250-1351.
2. PCS funds are not available (unless otherwise stated).
3. Be advised that if selected for a military technician position where membership in a reserve component is a condition of employment, your bonus may be terminated and may or may not be subject to recoupment. Questions pertaining to recoupment may be directed to the State Incentives manager at (720) 250-1337.
4. AGR positions are not announced/applied for on USA Jobs. Contact your respective AGR offices for instructions on how to apply for AGR positions.
5. A security clearance may be required for this position. Please contact the selecting supervisor or state security manager with questions regarding clearances. (Failure to obtain/maintain a security clearance may be grounds for termination from the Technician program.)
6. This position may be contingent on the vacancy of the incumbent even if not otherwise stated in this announcement. Please contact the HRO with any questions regarding hiring dates.
7. Unless stated otherwise: If this position is posted as an Indefinite Technician, it may be converted to Permanent without further competition dependent upon budgetary and resource constraints. Employees who are appointed as INDEFINITE tenure may be terminated with a 30-day notice. Please contact the HRO with any questions regarding employment status.
8. Per ARNG-HRH Policy Memorandum #10-39, mandatory Full Time Staff (FTS) training is required within a year of hire as a condition of employment in vacancy announcements for both Technician and Active Guard Reserve positions. Failure of new FTS personnel to complete NGB prescribed courses at PEC within the first year of employment may be cause for reassignment to other full-time positions or termination of their employment.
9. We use E-Verify to verify the identity and employment eligibility of all persons hired.
Tests and troubleshoots aircraft rotor and/or propeller systems using special tools and test equipment. Diagnoses any malfunctions of rotor/propeller systems and makes necessary repairs. Performs troubleshooting of the powertrain systems using special tools and test equipment, diagnoses any system malfunctions and makes necessary repairs. Subjects rotor, propeller, and powertrain parts to a variety of nondestructive testing to identify imperfections not otherwise detected. Utilizing power hoists, special slings and balancing equipment, aligns and balances assembled propellers/rotor blades by making appropriate linkage adjustments and by making both chordwise and spanwise weight adjustments to bring blades into true balance. After assembly or installation of the blade systems on the aircraft, makes final adjustments to balance, track, eliminate vibrations and ensure proper revolutions per minute (RPM) by checking blade track utilizing special tracking equipment and making weight, trim tab, and control linkage adjustments. Performs operational checks of installed aircraft blades and associated sub-systems both inflight and during aircraft maintenance ground runs. Wears and utilizes appropriate safety equipment and follows pertinent safety precautions. May be required to serve, if employed in an AVCRAD, on maintenance assistance and instruction teams (MAIT) and CONTACT Teams throughout supported area. Performs other duties as assigned.
Requirements
Conditions of employment
- Selectee will be required to wear the military uniform.
- May be required to successfully complete a probationary period.
- Participation in direct deposit is mandatory.
- Membership in the Colorado Army National Guard or eligible to transfer.
- Must hold the grade of E-4 thru E-7.
- Submit all required documentation.
- For positions requiring the operation for motor vehicle, candidates must have a valid state driver's license for the state in which they live or are principally employed.
- Must be able to obtain and maintain the appropriate security clearance of the position.
- Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
Military Grades: E-4 thru E-7
1. Specialized experience will be used to determine qualifications for the announced position.
2. An applicant's RESUME must provide, in detail, how they meet each specialized experience listed below. Resume must be two pages or less.
3. It must be documented with "from (mm/yy)" and "to (mm/yy)" dates and description of the specialized experience.
DO NOT copy each bullet listed below word for word and place into your resume; you must describe your personal experience as it pertains to each bullet.
You will be immediately disqualified if you fail to include specialized experience in your resume.
Must have at least 18 months of experience in each of the following :
1. Experience performing standard, routine assembly and disassembly operations and making prescribed modifications to aircraft propellers, assemblies, and accessories.
2. Experience performing maintenance overhaul, troubleshooting, testing, and repair of aircraft propellers, components, for rotary wing
aircraft.
3. Experience determining maintenance needed from work orders, inspectionreports, historical record, and by own diagnosis.
Education
Education cannot be substituted for Specialized Experience for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
1. If you would like to inquire about joining the Colorado Army National Guard, please contact (720) 250-1351.
2. PCS funds are not available (unless otherwise stated).
3. Be advised that if selected for a military technician position where membership in a reserve component is a condition of employment, your bonus may be terminated and may or may not be subject to recoupment. Questions pertaining to recoupment may be directed to the State Incentives manager at (720) 250-1337.
4. AGR positions are not announced/applied for on USA Jobs. Contact your respective AGR offices for instructions on how to apply for AGR positions.
5. A security clearance may be required for this position. Please contact the selecting supervisor or state security manager with questions regarding clearances. (Failure to obtain/maintain a security clearance may be grounds for termination from the Technician program.)
6. This position may be contingent on the vacancy of the incumbent even if not otherwise stated in this announcement. Please contact the HRO with any questions regarding hiring dates.
7. Unless stated otherwise: If this position is posted as an Indefinite Technician, it may be converted to Permanent without further competition dependent upon budgetary and resource constraints. Employees who are appointed as INDEFINITE tenure may be terminated with a 30-day notice. Please contact the HRO with any questions regarding employment status.
8. Per ARNG-HRH Policy Memorandum #10-39, mandatory Full Time Staff (FTS) training is required within a year of hire as a condition of employment in vacancy announcements for both Technician and Active Guard Reserve positions. Failure of new FTS personnel to complete NGB prescribed courses at PEC within the first year of employment may be cause for reassignment to other full-time positions or termination of their employment.
9. We use E-Verify to verify the identity and employment eligibility of all persons hired.
group id: DOA