Posted 4 days ago
Secret
Unspecified
Unspecified
Winchester, VA (On-Site/Office)
Duties
Conditions of employment
Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See for an extensive list of document requirements for all employment authorities.
FOR GS-07
Specialized Experience: One year of specialized experience which includes 1. analyzing, editing, and/or coordinating any request for design or construction changes of any size or cost after award of contract; 2. using experience and initiative in applying and adapting practices, where significant departures from established practices and precedents are required; and 3. developing technical guidance for use by installations and other design disciplines. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05).
OR
Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study].
OR
Superior Academic Achievement: Successful completion of all the requirements for a bachelor's degree with Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. [Note: Remove the words "such as that identified in Education above" if the position you are filling does not require education in specific fields found in an Individual Occupational Requirement.] Superior Academic Achievement is based on:
(1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR
(2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR
(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/).
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.
GS-09
Specialized Experience: One year of specialized experience which includes 1. assisting architects and engineers in preparation of contract documents, which include drawings, specifications, and design analysis for a variety of complex military and civil facilities; 2. evaluating design objectives, making calculations, and identifying the most economical and effective procedures for project development; and 3. furnishing to higher authority the technical cost information to support decisions on modifications to contracts. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07).
OR
Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree or LL.B. or J.D. [remove LL.B or J.D., if unrelated] in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study].
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.
FOR GS-11
Specialized Experience: One year of specialized experience which includes 1. investigating failure of materials which are unsatisfactory from fabrication or installation standpoint and report on findings with recommended solution; 2. checking contractor shop drawings for compliance with contract plans and specifications and properly annotate shop drawings; and 3. preparing sketches or change drawings and specifications to eliminate potential problems; planning and/or overseeing demonstrations by manufacturers' representatives. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher-level graduate education leading to such a degree or LL.M. [remove LL.M., if unrelated] in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study].
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.
Continued in Education Block
Education
FOR GS-12
Specialized Experience: One year of specialized experience which includes 1. reviewing work by in-house staff, A-E firms, and other Corps offices for excellence and compliance with regulations and criteria; 2. making direct recommendations to other technical units, covering matters such as estimated time for completion of work, factual and technical data, and the cost of alternate methods, materials, or equipment; and 3. preparing preliminary engineering and architectural final plans and detail drawings for a variety of projects, in support of the U.S. Military and foreign governments. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).
Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.
You will be evaluated on the basis of your level of competency in the following areas:
GS-09 Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent. (GS-07)
GS-11 Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent. (GS-09)
GS-12 Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent. (GS-11)
Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11)
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: .
Additional information
- As an Interior Designer you will serve as a technical specialist in interior design (FFE and SID) for projects designed by the Middle East District or architectural-engineering (A-E) firms under Government contract.
- Responsible for making the final detailed check and review of the work; recommendations for technical sufficiency; coordination of details and design features; and adherence to design criteria and established policy.
- Responsible for design of projects which are extensive in scope and complexity, requiring skill, ingenuity, creativity, and/or knowledge of advanced principles, techniques, and procedures.
- Analyze, edit, and coordinate any request for design or construction changes of any size or cost after award of contract.
- Assist architects and engineers in preparation of contract documents, which include drawings, specifications, and design analysis for a variety of complex military and civil facilities.
- Make field trips to overseas project sites to advise on the feasibility and scope of improvements to existing facilities, from the standpoint of existing practices, materials, and cost considerations.
- Keep abreast of development and use of new materials, their cost and fabrication through literature published by manufacturers, news articles, and contacts with manufacturers, reports, and recommendations concerning use of such materials.
- Prepare Comprehensive Interior Design (CID) packages inclusive of both Structural Interior Design (SID) and Furniture, Fixtures, and Equipment (FFE) packages.
Conditions of employment
- Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
- Work may involve periodic long and short TDY to overseas locations in the Middle East District area of responsibility (AOR).
- This position has a Temporary Duty (TDY) or business travel requirement of 15% of the time
- This position requires the incumbent be able to obtain and maintain a determination of eligibility for a Secret security clearance or access for the duration of employment
Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See for an extensive list of document requirements for all employment authorities.
- Current Department of Army Civilian Employees
- Current Department of Defense (DOD) Civilian Employee (non-Army)
- Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce
- Interagency Career Transition Assistance Plan
- Land Management Workforce Flexibility Act
- Military Spouses, under Executive Order (E.O.) 13473
- Non-Department of Defense (DoD) Transfer
- Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
- Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
- Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
- Priority Placement Program, DoD Retained Grade Preference Eligible
- Reinstatement
- Veterans Employment Opportunity Act (VEOA) of 1998
FOR GS-07
Specialized Experience: One year of specialized experience which includes 1. analyzing, editing, and/or coordinating any request for design or construction changes of any size or cost after award of contract; 2. using experience and initiative in applying and adapting practices, where significant departures from established practices and precedents are required; and 3. developing technical guidance for use by installations and other design disciplines. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05).
OR
Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study].
OR
Superior Academic Achievement: Successful completion of all the requirements for a bachelor's degree with Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. [Note: Remove the words "such as that identified in Education above" if the position you are filling does not require education in specific fields found in an Individual Occupational Requirement.] Superior Academic Achievement is based on:
(1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR
(2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR
(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/).
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.
GS-09
Specialized Experience: One year of specialized experience which includes 1. assisting architects and engineers in preparation of contract documents, which include drawings, specifications, and design analysis for a variety of complex military and civil facilities; 2. evaluating design objectives, making calculations, and identifying the most economical and effective procedures for project development; and 3. furnishing to higher authority the technical cost information to support decisions on modifications to contracts. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07).
OR
Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree or LL.B. or J.D. [remove LL.B or J.D., if unrelated] in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study].
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.
FOR GS-11
Specialized Experience: One year of specialized experience which includes 1. investigating failure of materials which are unsatisfactory from fabrication or installation standpoint and report on findings with recommended solution; 2. checking contractor shop drawings for compliance with contract plans and specifications and properly annotate shop drawings; and 3. preparing sketches or change drawings and specifications to eliminate potential problems; planning and/or overseeing demonstrations by manufacturers' representatives. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher-level graduate education leading to such a degree or LL.M. [remove LL.M., if unrelated] in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study].
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.
Continued in Education Block
Education
FOR GS-12
Specialized Experience: One year of specialized experience which includes 1. reviewing work by in-house staff, A-E firms, and other Corps offices for excellence and compliance with regulations and criteria; 2. making direct recommendations to other technical units, covering matters such as estimated time for completion of work, factual and technical data, and the cost of alternate methods, materials, or equipment; and 3. preparing preliminary engineering and architectural final plans and detail drawings for a variety of projects, in support of the U.S. Military and foreign governments. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).
Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.
You will be evaluated on the basis of your level of competency in the following areas:
- Architecture
- Design
- Project Management
GS-09 Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent. (GS-07)
GS-11 Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent. (GS-09)
GS-12 Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent. (GS-11)
Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11)
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: .
Additional information
- Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
- You will be required to provide proof of U.S. Citizenship.
- One year trial/probationary period may be required.
- Direct deposit of pay is required.
- This position requires you to submit a Public Financial Disclosure Report (OGE 278) or a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter.
- Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
- If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the information sheet.
- This is a(n) Engineers & Scientist Career Field position.
- Salary includes applicable locality pay or Local Market Supplement.
- When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit for more information.
- Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
- Relocation/Hiring Incentives may be authorized.
group id: DOA
N
