Posted today
Secret
Unspecified
Unspecified
Engineering - Mechanical
Chaffee (On-Site/Office)
Duties
(1) Performs functional tests, analyzes performance and malfunctions, removes, installs, tests, maintains, modifies, performs alignments and troubleshoots the electronic, electrical, mechanical and hydraulic assemblies, modules, and interconnecting cables of a variety of combat and tactical equipment to include the M1 series main battle tank, M2/3 series Bradley fighting vehicle, Multiple Launch Rocket System (MLRS), TOW Missile System and the ATACMS Launch Loader Module (LLM). Utilizes Integrated Family Test Equipment (IFTE), Built In Test Equipment (BITE) and break out boxes (BOB) for fault isolation, verification, or adjustment of assemblies and modules. Repairs or replaces chassis mounted components on Unit Under Test (UUT). Performs Automatic Test Equipment (ATE) operations for fault isolation on LLM electronic modules, circuit cards, and assemblies to component level. Replaces faulty components on UUT printed circuit boards and power distribution systems. Utilizes oscilloscopes, signal generators, digital multi-meters, and other test equipment to locate, diagnose, and repair malfunctions.
(2) Troubleshoots and repairs launch pod/container (LP/C), trainer rocket simulator modules, Missiles/Launchers Pod Assembly (M/LPA), trainer missile simulator modules, and various like items. Troubleshoots carrier electrical and power distributions systems as an integrated subsystem of the weapon system or equipment being repaired. Isolates faulty assemblies, cables, wiring harnesses and modules to component level for repair or replacement. Insures proper integration of information between carrier, Fire Control System (FCS), vehicle and equipment hydraulic and mechanical systems, secure digital communications system, and intercommunications system. Installs equipment modifications to system per technical work orders. Performs initial and final checks and may perform inspections when required of designated systems. May act as quality assurance/control inspector for other mechanics' work. Determines deficiencies in troubleshooting procedures for the equipment being repaired and makes recommendations for corrective action to technical manuals.
(3) Performs field and limited sustainment maintenance to include installation, routine maintenance, repair, and overhaul of fixed and mobile operational communication and electronics systems, e.g., shelter mounted AM radio and teletype systems, shelter mounted single side band radio and teletype systems, shelter mounted radio relay and terminal systems, complex radar systems, interrogators, gun, rocket, and missile fire control, directional and digital computer systems, peripheral equipment, and related test equipment, and Modification Table Of Equipment (MTOE) authorized automation equipment. Repairs, aligns, and adjusts missile guidance control systems, infrared night vision sights, optical sights, and traversing units. Removes and replaces defective electrical, electronic, and mechanical components. Conducts inspections, diagnoses nature and extent of equipment malfunction. Determines whether equipment may be economically repaired or declared unserviceable, and performs required maintenance to restore to a serviceable condition various types of tactical computers, radio sets, and similar items. Repairs or salvages defective components. Isolates and diagnoses cause of circuit/component malfunction using signal string lists, schematics, standard, special, and electronic Test Measurement and Diagnostic Equipment (TMDE) or repair equipment. Uses associated field maintenance equipment in analytical maintenance procedures. Interprets complex schematic diagrams.
(4) Uses various types of test equipment to include systems test sets and stands such as AN/GRM-122s, frequency meters, standing wave indicators, oscillators, ohmmeters, voltmeters, resistance bridges, and signal generators to localize trouble by component unit, by circuit within a component, and by element of a circuit. Uses special and common hand tools, power tools, and gauges to make intricate repairs. Fabricates items and parts for repair of mechanical and electronic equipment.
(5) Performs administrative functions in establishing and maintaining maintenance records on equipment maintained or repaired. Assists in the preparation of requests for required repair parts.
(6) May conduct or be involved in a Maintenance Assistance and Instruction Team (MAIT) or act as an inspector on a Command Maintenance Evaluation Team (COMET) on electronic, automation, communication, and equipment. Provides technical assistance and instruction to units throughout the state so that they will be able to operate at the desired level of proficiency.
(7) Performs other duties as assigned:
Requirements
Conditions of employment
NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership in the military grade listed below. Selectee will be required to wear the military uniform.
Military Grades: Enlisted
Minimum Grade - E-1/ PVT
Maximum Grade - E-5/ SGT/ CW2
Compatible Military Assignments: Selectee must be a member of the Arkansas Army National Guard.
IMPORTANT NOTES (AS APPLICABLE): Upon selection for this position, individual must possess or initiate a National Agency Check with Inquiries (NACI) background investigation. A favorable determination based upon investigative results is mandatory for this position. Failure to meet these requirements will result in termination of employment. A pre-placement physical is required if not already current. Upon selection, must complete mandatory Full-Time Support (FTS) Training at the Professional Education Center (PEC) within six months of assignment (if applicable, training will be coordinated by the supervisor). Individual must meet all military requirements of the position without creating a grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO.
ADDITIONAL REQUIREMENTS ARE LISTED UNDER ADDITIONAL INFORMATION
Qualifications
GENERAL EXPERIENCE:
Experience or training which demonstrates the applicant's knowledge of electrical or electronic theory, knowledge of common testing procedures, skill in the use of hand tools of the electronics trade, and skill in reading schematics.
SPECIALIZED EXPERIENCE :
Experience or training in utilizing principles, basic functions and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in using hand tools, power tools and gauges to make intricate repairs. Experience in using diagnostic and testing equipment. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
ADDITIONAL REQUIREMENTS/CONDITIONS OF EMPLOYMENT:
(1) Performs functional tests, analyzes performance and malfunctions, removes, installs, tests, maintains, modifies, performs alignments and troubleshoots the electronic, electrical, mechanical and hydraulic assemblies, modules, and interconnecting cables of a variety of combat and tactical equipment to include the M1 series main battle tank, M2/3 series Bradley fighting vehicle, Multiple Launch Rocket System (MLRS), TOW Missile System and the ATACMS Launch Loader Module (LLM). Utilizes Integrated Family Test Equipment (IFTE), Built In Test Equipment (BITE) and break out boxes (BOB) for fault isolation, verification, or adjustment of assemblies and modules. Repairs or replaces chassis mounted components on Unit Under Test (UUT). Performs Automatic Test Equipment (ATE) operations for fault isolation on LLM electronic modules, circuit cards, and assemblies to component level. Replaces faulty components on UUT printed circuit boards and power distribution systems. Utilizes oscilloscopes, signal generators, digital multi-meters, and other test equipment to locate, diagnose, and repair malfunctions.
(2) Troubleshoots and repairs launch pod/container (LP/C), trainer rocket simulator modules, Missiles/Launchers Pod Assembly (M/LPA), trainer missile simulator modules, and various like items. Troubleshoots carrier electrical and power distributions systems as an integrated subsystem of the weapon system or equipment being repaired. Isolates faulty assemblies, cables, wiring harnesses and modules to component level for repair or replacement. Insures proper integration of information between carrier, Fire Control System (FCS), vehicle and equipment hydraulic and mechanical systems, secure digital communications system, and intercommunications system. Installs equipment modifications to system per technical work orders. Performs initial and final checks and may perform inspections when required of designated systems. May act as quality assurance/control inspector for other mechanics' work. Determines deficiencies in troubleshooting procedures for the equipment being repaired and makes recommendations for corrective action to technical manuals.
(3) Performs field and limited sustainment maintenance to include installation, routine maintenance, repair, and overhaul of fixed and mobile operational communication and electronics systems, e.g., shelter mounted AM radio and teletype systems, shelter mounted single side band radio and teletype systems, shelter mounted radio relay and terminal systems, complex radar systems, interrogators, gun, rocket, and missile fire control, directional and digital computer systems, peripheral equipment, and related test equipment, and Modification Table Of Equipment (MTOE) authorized automation equipment. Repairs, aligns, and adjusts missile guidance control systems, infrared night vision sights, optical sights, and traversing units. Removes and replaces defective electrical, electronic, and mechanical components. Conducts inspections, diagnoses nature and extent of equipment malfunction. Determines whether equipment may be economically repaired or declared unserviceable, and performs required maintenance to restore to a serviceable condition various types of tactical computers, radio sets, and similar items. Repairs or salvages defective components. Isolates and diagnoses cause of circuit/component malfunction using signal string lists, schematics, standard, special, and electronic Test Measurement and Diagnostic Equipment (TMDE) or repair equipment. Uses associated field maintenance equipment in analytical maintenance procedures. Interprets complex schematic diagrams.
(4) Uses various types of test equipment to include systems test sets and stands such as AN/GRM-122s, frequency meters, standing wave indicators, oscillators, ohmmeters, voltmeters, resistance bridges, and signal generators to localize trouble by component unit, by circuit within a component, and by element of a circuit. Uses special and common hand tools, power tools, and gauges to make intricate repairs. Fabricates items and parts for repair of mechanical and electronic equipment.
(5) Performs administrative functions in establishing and maintaining maintenance records on equipment maintained or repaired. Assists in the preparation of requests for required repair parts.
(6) May conduct or be involved in a Maintenance Assistance and Instruction Team (MAIT) or act as an inspector on a Command Maintenance Evaluation Team (COMET) on electronic, automation, communication, and equipment. Provides technical assistance and instruction to units throughout the state so that they will be able to operate at the desired level of proficiency.
(7) Performs other duties as assigned:
Requirements
Conditions of employment
NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership in the military grade listed below. Selectee will be required to wear the military uniform.
Military Grades: Enlisted
Minimum Grade - E-1/ PVT
Maximum Grade - E-5/ SGT/ CW2
Compatible Military Assignments: Selectee must be a member of the Arkansas Army National Guard.
IMPORTANT NOTES (AS APPLICABLE): Upon selection for this position, individual must possess or initiate a National Agency Check with Inquiries (NACI) background investigation. A favorable determination based upon investigative results is mandatory for this position. Failure to meet these requirements will result in termination of employment. A pre-placement physical is required if not already current. Upon selection, must complete mandatory Full-Time Support (FTS) Training at the Professional Education Center (PEC) within six months of assignment (if applicable, training will be coordinated by the supervisor). Individual must meet all military requirements of the position without creating a grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO.
ADDITIONAL REQUIREMENTS ARE LISTED UNDER ADDITIONAL INFORMATION
Qualifications
GENERAL EXPERIENCE:
Experience or training which demonstrates the applicant's knowledge of electrical or electronic theory, knowledge of common testing procedures, skill in the use of hand tools of the electronics trade, and skill in reading schematics.
SPECIALIZED EXPERIENCE :
Experience or training in utilizing principles, basic functions and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in using hand tools, power tools and gauges to make intricate repairs. Experience in using diagnostic and testing equipment. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
ADDITIONAL REQUIREMENTS/CONDITIONS OF EMPLOYMENT:
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a probationary period.
- Participation in direct deposit is mandatory.
- Must be able to obtain/maintain appropriate security clearance
group id: DOA
