Posted today
Public Trust
Unspecified
None
Oklahoma City, OK (On-Site/Office)
The Contractor shall perform troubleshooting, tear-down, repair, refurbishment, overhaul, assembly, testing, and installation services for designated equipment at the request of FAALC Product Divisions or Groups. Labor categories required to provide these services may include Electronics Technicians and Engineering Technicians as necessary to meet specific task requirements.
Engineering Technician Services:
The Contractor shall provide engineering technician services to the various FAALC Product Divisions to help assure that electrical, electronic, and mechanical equipment meets serviceability, reliability, and availability requirements. These services may include tasks such as: assembling, repairing and refurbishing equipment, components, test fixtures, and prototypes; performing equipment performance analyses and data collection and reporting; and installing equipment and modifications. The Contractor shall complete all tasks in accordance with applicable FAA and FAALC standards, orders, technical instructions, and quality procedures.
Equipment Assembly and Repair:
The Contractor shall assemble and repair electrical, electronic, and mechanical systems, subsystems, and components. Equipment assembly processes may require a combination of design, fabrication, and/or construction functions for items such as power and signal cables, circuit boards, electrical and mechanical components, test fixtures, and engineering prototypes. Equipment repair processes may include functions such as performance analysis, equipment disassembly/assembly, troubleshooting and correction of electrical, electronic, or mechanical malfunctions, parts replacement, painting and composite structures. The Contractor shall complete applicable adjustment, testing, and certification processes on all items assembled or repaired. All process functions shall be performed and documented as specified in the technical documentation applicable to the system/subsystem/component.
Equipment Performance Analyses and Data Collection:
The Contractor shall perform equipment and component performance analyses to determine operating characteristics and parameters, to aid in fault isolation and identification, and to verify equipment functions under variable conditions. The Contractor shall collect and record appropriate engineering data to document results of the analyses. The Contractor shall also extract, produce, compile, and present a variety of systems data and logistics support information obtained from various sources.
Equipment Installation:
The Contractor shall install electrical, electronic, and mechanical systems, subsystems, components, test fixtures, modifications and engineering prototypes. The Contractor may be required to perform adjustment, test, and certification functions for this equipment.
Responsibilities
While not all inclusive, examples of tasks to be performed include:
Qualifications
Desired Qualifications:
Job ID
2026-21430
Work Type
On-Site
Company Description
![]()
Work Where it Matters
Five Rivers Analytics (FRA), an Akima company, is not just another federal IT contractor. As an Alaska Native Corporation (ANC), our mission and purpose extend beyond our exciting federal projects as we support our shareholder communities in Alaska.
At FRA, the work you do every day makes a difference in the lives of our 15,000 Iñupiat shareholders, a group of Alaska natives from one of the most remote and harshest environments in the United States.
For our shareholders, FRA provides support and employment opportunities and contributes to the survival of a culture that has thrived above the Arctic Circle for more than 10,000 years.
For our government customers, FRA delivers streamline operations in support of an increasingly fast-paced, complex, and dynamic digital environment.
As a FRA employee, you will be surrounded by a challenging, yet supportive work environment that is committed to innovation and diversity, two of our most important values. You will also have access to our comprehensive benefits and competitive pay in addition to growth opportunities and excellent retirement options.
Engineering Technician Services:
The Contractor shall provide engineering technician services to the various FAALC Product Divisions to help assure that electrical, electronic, and mechanical equipment meets serviceability, reliability, and availability requirements. These services may include tasks such as: assembling, repairing and refurbishing equipment, components, test fixtures, and prototypes; performing equipment performance analyses and data collection and reporting; and installing equipment and modifications. The Contractor shall complete all tasks in accordance with applicable FAA and FAALC standards, orders, technical instructions, and quality procedures.
Equipment Assembly and Repair:
The Contractor shall assemble and repair electrical, electronic, and mechanical systems, subsystems, and components. Equipment assembly processes may require a combination of design, fabrication, and/or construction functions for items such as power and signal cables, circuit boards, electrical and mechanical components, test fixtures, and engineering prototypes. Equipment repair processes may include functions such as performance analysis, equipment disassembly/assembly, troubleshooting and correction of electrical, electronic, or mechanical malfunctions, parts replacement, painting and composite structures. The Contractor shall complete applicable adjustment, testing, and certification processes on all items assembled or repaired. All process functions shall be performed and documented as specified in the technical documentation applicable to the system/subsystem/component.
Equipment Performance Analyses and Data Collection:
The Contractor shall perform equipment and component performance analyses to determine operating characteristics and parameters, to aid in fault isolation and identification, and to verify equipment functions under variable conditions. The Contractor shall collect and record appropriate engineering data to document results of the analyses. The Contractor shall also extract, produce, compile, and present a variety of systems data and logistics support information obtained from various sources.
Equipment Installation:
The Contractor shall install electrical, electronic, and mechanical systems, subsystems, components, test fixtures, modifications and engineering prototypes. The Contractor may be required to perform adjustment, test, and certification functions for this equipment.
Responsibilities
While not all inclusive, examples of tasks to be performed include:
- NAVAID antenna and component repair and overhaul.
- Rotary joint and drive motor troubleshooting and repair.
- Circuit board testing and repair
- Production and repair of electronic cables and wire harnesses. Performing equipment performance analyses, and information collection and reporting.
- Performing equipment adjustment, testing, and certification.
- Installation of equipment and components, and modifications.
- Installation and maintenance of NAS Radomes.
- Use appropriate tools to disassemble and reassemble mechanical/electro-mechanical parts, including but not limited to drive motors, gearboxes, antenna pedestals, electric blowers, and air compressors.
- Familiarity with electric, pneumatic, and common hand tools.
- Attention to detail and accuracy when completing data entries for asset maintenance.
- Take notes and write reports describing work performed on serialized assets.
- Assist in moving large assets around shop for support shop work and for testing purposes.
- Ability to read and follow along to work aids and technical manuals to repair and overhaul mechanical assets.
- Ability to use a computer, basic computer tools such as MS word/excel, internet explorer, and other government inventory and time keeping programs.
Qualifications
- Minimum High School Diploma/GED with completion of formal technical training courses.
- Knowledge is required in: assisting in producing, reviewing, revising, and interpreting technical documents; assisting in designing, fabricating, assembling, troubleshooting, and repairing electrical, electronic, and mechanical systems, subsystems, components, test fixtures, and prototypes; developing and performing equipment and component adjustment, test, and certification processes; and in installing equipment and modifications.
- Demonstrated experience using appropriate tools to disassemble and reassemble mechanical/electro-mechanical parts, including but not limited to drive motors, gearboxes, antenna pedestals, electric blowers, and air compressors.
- Working knowledge of electric, pneumatic, and common hand tools.
- Proven attention to detail and accuracy when completing data entries for asset maintenance.
- Ability to take notes and write reports describing work performed on serialized assets.
- Experience assisting in moving large assets around the shop for support shop work and for testing purposes.
- Ability to read and follow work aids and technical manuals to repair and overhaul mechanical assets.
- Proficiency in using a computer and basic computer tools such as MS Word, Excel, internet explorer, and other government inventory and time keeping programs.
- Due to safety and operational requirements mandated by our government customer, all engineering technicians are required to successfully complete a physical fitness evaluation.
- NACI Clearance - ability to obtain Public Trust.
- A valid driver's license is required.
- Must possess TWO forms of unexpired identification to meet eligibility requirements.
- One Primary form of government-issued identification, selected from the following:
- Valid REAL ID-compliant driver's license or state-issued ID card.
- U.S. Department of Transportation (DOT) Transportation ID Card.
- U.S. Passport or U.S. Passport Card.
- Permanent Resident Card (Form I-551).
- U.S. Military or U.S. Military dependent's ID Card with photograph.
- U.S. Government Personal Identity Verification (PIV) Card.
- One secondary form of identification, such as:
- Social security card.
- Original or certified copy of a birth certificate.
- Certificate of U.S. Citizenship or Naturalization.
- Voter registration card.
- One Primary form of government-issued identification, selected from the following:
- Estimated Monthly Travel required for this position: NONE.
Desired Qualifications:
- Specialized knowledge of FAA systems, equipment, procedures, and operations is highly desired.
- Installation of electronic and mechanical systems and components.
- Experience with:
- Operation of boom man lifts.
- Operation of pallet Jacks.
- Operation of motorized forklift.
Job ID
2026-21430
Work Type
On-Site
Company Description
Work Where it Matters
Five Rivers Analytics (FRA), an Akima company, is not just another federal IT contractor. As an Alaska Native Corporation (ANC), our mission and purpose extend beyond our exciting federal projects as we support our shareholder communities in Alaska.
At FRA, the work you do every day makes a difference in the lives of our 15,000 Iñupiat shareholders, a group of Alaska natives from one of the most remote and harshest environments in the United States.
For our shareholders, FRA provides support and employment opportunities and contributes to the survival of a culture that has thrived above the Arctic Circle for more than 10,000 years.
For our government customers, FRA delivers streamline operations in support of an increasingly fast-paced, complex, and dynamic digital environment.
As a FRA employee, you will be surrounded by a challenging, yet supportive work environment that is committed to innovation and diversity, two of our most important values. You will also have access to our comprehensive benefits and competitive pay in addition to growth opportunities and excellent retirement options.
group id: 10119288
Be part of something bigger. With Akima, you’ll enjoy the agility and autonomy of working for a small business, while also being supported by an enterprise over 10,000 employees strong. Career growth and opportunity? Look no further.
