Today
Secret
Unspecified
Unspecified
Engineering - Civil
Fresno, CA (On-Site/Office)
Duties
THIS IS A T32 EXCEPTED SERVICE, PERMANENT POSITION
The primary purpose of the ARCHITECT/ENGINEER, GS-0810-12, is to provide supervisory (less than 25%) and technical assistance to the Base Architect/Engineer in overseeing and managing the engineering shops and production control function, provide technical support to all assigned sections and provide guidance to these sections on standard and code requirements
May make additional selections within 90 days of eligible(s) issuance.
Requirements
Conditions of employment
CALIFORNIA NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in the California National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. If you are interested in joining the California National Guard, please contact a California National Guard recruiter prior to applying for this position. https://ca.nationalguard.com/california
Compatible Military Assignment and Grade are required. Military technicians must be assigned to a military position in the same unit which they are employed or, in a unit that is supported by the employing activity. Military technicians must hold the military grade specified for the position.
Priority Areas(s) of Consideration:
Priority consideration is first given to the areas below.
AREA I= Current California National Guard employees who are serving on a Permanent/Indefinite/Temporary appointment.
AREA II= Current California National Guard members.
AREA III= Current military members of the Air Force/Army National Guard, Air Force/Army Reserve or Air Force/Army Active Duty. (Applicants who are currently in other Air/Army branches and NOT currently a member of the California National Guard (CNG) must become a member of a compatible unit of assignment within the Air Force CNG commensurate with the military grade listed in this announcement prior to federal assignment).
Military Grades: O-3 or O-4
Recruitment/Relocation
Recruitment/Relocation Incentive IS NOT authorized.
PCS
Relocation Costs IS NOT authorized based on determination that Permanent Change of Station (PCS) move is not in the Government best interest.
Must maintain appropriate level of security clearance.
Must wear appropriate military uniform including required grooming standards.
Must maintain a compatible military unit, grade and job assignment as required by current directives.
Participation in direct deposit is mandatory.
Security Clearance: at a minimum a National Agency Check is required.
Qualifications
ARCHITECT/ENGINEER, GS-0810-12: Must have at least one year of specialized experience, equivalent to at least the GS-11 level, or equivalent pay band in other pay systems in the Federal government. This experience may also have been obtained in the private sector, but must demonstrate that it is comparable to the GS grade indicated. Specialized experience may have been demonstrated by performing duties such as: experience, education, or training for management, supervision, or performance of planning, designing, construction, and/or maintaining structures and facilities; and investigating, measuring, surveying, and mapping the earth's physical features.
**This position is an interdisciplinary position. The title of Architect, General Engineer, Civil Engineer, Mechanical Engineer, Electrical Engineer and occupational series is assigned depending on the qualifications of the incumbent selected to fill the position.**
Your qualifications will be evaluated on the following competencies:
A. Degree: Professional Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
When there is a positive education or certification requirement, or you are using education to qualify as a substitution for experience, copies of transcripts (unofficial) and/or certificates are required at the time of application to verify that you meet the educational/certification requirement or substitution. Failure to provide transcripts and/or certificates at the time of application will result in automatic disqualification.
Only attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education may be credited. Applicants can verify accreditation at the following website: www.ed.gov/admins/finaid/accred/index.html.
Foreign Education: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.
Additional information
MILITARY MEMBERS WITH BONUSES: Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period).
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
If you are unable to apply online or need to fax a document you do not have in electronic form, please email or Fax to 916-854-3439.
THIS IS A T32 EXCEPTED SERVICE, PERMANENT POSITION
The primary purpose of the ARCHITECT/ENGINEER, GS-0810-12, is to provide supervisory (less than 25%) and technical assistance to the Base Architect/Engineer in overseeing and managing the engineering shops and production control function, provide technical support to all assigned sections and provide guidance to these sections on standard and code requirements
May make additional selections within 90 days of eligible(s) issuance.
Requirements
Conditions of employment
CALIFORNIA NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in the California National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. If you are interested in joining the California National Guard, please contact a California National Guard recruiter prior to applying for this position. https://ca.nationalguard.com/california
Compatible Military Assignment and Grade are required. Military technicians must be assigned to a military position in the same unit which they are employed or, in a unit that is supported by the employing activity. Military technicians must hold the military grade specified for the position.
Priority Areas(s) of Consideration:
Priority consideration is first given to the areas below.
AREA I= Current California National Guard employees who are serving on a Permanent/Indefinite/Temporary appointment.
AREA II= Current California National Guard members.
AREA III= Current military members of the Air Force/Army National Guard, Air Force/Army Reserve or Air Force/Army Active Duty. (Applicants who are currently in other Air/Army branches and NOT currently a member of the California National Guard (CNG) must become a member of a compatible unit of assignment within the Air Force CNG commensurate with the military grade listed in this announcement prior to federal assignment).
Military Grades: O-3 or O-4
Recruitment/Relocation
Recruitment/Relocation Incentive IS NOT authorized.
PCS
Relocation Costs IS NOT authorized based on determination that Permanent Change of Station (PCS) move is not in the Government best interest.
Must maintain appropriate level of security clearance.
Must wear appropriate military uniform including required grooming standards.
Must maintain a compatible military unit, grade and job assignment as required by current directives.
Participation in direct deposit is mandatory.
Security Clearance: at a minimum a National Agency Check is required.
Qualifications
ARCHITECT/ENGINEER, GS-0810-12: Must have at least one year of specialized experience, equivalent to at least the GS-11 level, or equivalent pay band in other pay systems in the Federal government. This experience may also have been obtained in the private sector, but must demonstrate that it is comparable to the GS grade indicated. Specialized experience may have been demonstrated by performing duties such as: experience, education, or training for management, supervision, or performance of planning, designing, construction, and/or maintaining structures and facilities; and investigating, measuring, surveying, and mapping the earth's physical features.
**This position is an interdisciplinary position. The title of Architect, General Engineer, Civil Engineer, Mechanical Engineer, Electrical Engineer and occupational series is assigned depending on the qualifications of the incumbent selected to fill the position.**
Your qualifications will be evaluated on the following competencies:
- Ability To Lead or Supervise
- Decision Making
- Design
- General Engineering
A. Degree: Professional Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
When there is a positive education or certification requirement, or you are using education to qualify as a substitution for experience, copies of transcripts (unofficial) and/or certificates are required at the time of application to verify that you meet the educational/certification requirement or substitution. Failure to provide transcripts and/or certificates at the time of application will result in automatic disqualification.
Only attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education may be credited. Applicants can verify accreditation at the following website: www.ed.gov/admins/finaid/accred/index.html.
Foreign Education: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.
Additional information
MILITARY MEMBERS WITH BONUSES: Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period).
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
If you are unable to apply online or need to fax a document you do not have in electronic form, please email or Fax to 916-854-3439.
group id: DOAF
