Today
Secret
Unspecified
Unspecified
(On-Site/Office)
Duties
As aMOBILE EQUIPMENT METAL WORKER , WG-3809 -9 , you will:
Conditions of employment
Military Grades: E-3 thru E-7
Compatible Military Assignments:
GENERAL EXPERIENCE : Experience or training which has provided a knowledge of mobile body construction; and the skill to remove, fabricate, reshape and replace or repair such damage as, dents, tears, wrinkles, cuts and creases by cutting, knocking out, welding, filling and sanding.
SPECIALIZED EXPERIENCE : Experience or training which has provided knowledge of mobile equipmentconstruction and how all components and parts are installed and determine the total extent of damage
and repair alternatives. Experience in the use of gas, arc, and welding equipment to cut out damaged
or deteriorated areas, remove rusted nuts and bolts, strengthen brackets and braces, weld simple cuts
and breaks, and apply heat to bend, reshape damaged areas. Experience in the use of trade
equipment. Experience applying body filler to build up depressed areas, and the skill to smooth by
grinding and sanding, until the contour is uniform with the adjoining areas. Experience applying
primers paint with brush or spray gun, gravity feed and HVLP (high volume low pressure) equipment.
Experience in mathematical calculations and scribe patterns in the fabrication of wood or metal parts
having straight lines or irregular curves.
As required by Executive Order 14043, Federal employees are required to be fully vaccinated against COVID-19 regardless of the employee's duty location or work arrangement (e.g., telework, remote work, etc.), subject to such exceptions as required by law. If selected, you will be required to be vaccinated against COVID-19 and submit documentation of proof of vaccination by November 22, 2021 or before appointment or onboarding with the agency, if after November 22. The agency will provide additional information regarding what information or documentation will be needed and how you can request of the agency a legally required exception from this requirement.
Education
If you are using Education to qualify for this position,
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an .
As aMOBILE EQUIPMENT METAL WORKER , WG-3809 -9 , you will:
- Disassembles damaged mobile equipment bodies and components to determine nature and extent of damage and required repairs. Performs repair work on damaged equipment components such as fenders, panels, hoods, cowls, truck beds and associated parts such as brackets, covers, clamps, and braces. Repairs bodies by mending, replacing, or fabricating with sheet metals. On occasion, repairs damaged main frames and structural components such as doorposts, doorframes, skeletal framework, and main support members.
- Fabricates, assembles, and installs a variety of components made of sheet metal for buses, trailers, shelters, and other equipment. Lays out and cuts materials allowing for seams, joints, laps, and shrinkage. Bends and forms metal parts into desired shapes with hand and power tools and equipment. Uses equipment such as shears, brakes, folders, formers, crimping, burring, and bending machines. Assembles and fastens fabricated parts by installing bolts, rivets, screws, soldering, and welding. Repairs folds, wrinkles, creases, and large tears in fenders, doors, and roofs using hammers, dolly blocks, spoons, bending irons, mallets, sanders, grinders, files and hydraulic jacks. Prepares surfaces for painting by filling and sanding.
- Removes and replaces damaged fenders, quarter panels, and top panels by cutting and welding with oxyacetylene and electric arc welding equipment. Shrinks and stretches sheet metal to obtain desired shape and fit. Removes and replaces body trim, hardware, windshields, door glass, headliners, and other body components.
- Repairs radiators, fuel tanks, and similar items by straightening, soldering, patching, tube rodding and splicing, plugging core sections, replacing cores and pressure testing for leaks. Removes, disassembles, reassembles, and installs radiators, fuel tanks and similar items.
- Occasionally performs electrical repair work such as removing, splicing, insulating, soldering, and replacing cut or defective wiring on mobile equipment.
- Performs other duties as assigned.
Conditions of employment
- NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact an Army National Guard recruiter at 340-712-8071 prior to applying for this position.
- This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
- Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a probationary period.
- Participation in direct deposit is mandatory.
- Must be able to obtain and maintain the appropriate security clearance of the position.
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- Selected Reserve Incentive Program (SRIP): Acceptance of a Federal Technician Position of over 179 days in length will cause termination from the SRIP
Military Grades: E-3 thru E-7
Compatible Military Assignments:
GENERAL EXPERIENCE : Experience or training which has provided a knowledge of mobile body construction; and the skill to remove, fabricate, reshape and replace or repair such damage as, dents, tears, wrinkles, cuts and creases by cutting, knocking out, welding, filling and sanding.
SPECIALIZED EXPERIENCE : Experience or training which has provided knowledge of mobile equipmentconstruction and how all components and parts are installed and determine the total extent of damage
and repair alternatives. Experience in the use of gas, arc, and welding equipment to cut out damaged
or deteriorated areas, remove rusted nuts and bolts, strengthen brackets and braces, weld simple cuts
and breaks, and apply heat to bend, reshape damaged areas. Experience in the use of trade
equipment. Experience applying body filler to build up depressed areas, and the skill to smooth by
grinding and sanding, until the contour is uniform with the adjoining areas. Experience applying
primers paint with brush or spray gun, gravity feed and HVLP (high volume low pressure) equipment.
Experience in mathematical calculations and scribe patterns in the fabrication of wood or metal parts
having straight lines or irregular curves.
As required by Executive Order 14043, Federal employees are required to be fully vaccinated against COVID-19 regardless of the employee's duty location or work arrangement (e.g., telework, remote work, etc.), subject to such exceptions as required by law. If selected, you will be required to be vaccinated against COVID-19 and submit documentation of proof of vaccination by November 22, 2021 or before appointment or onboarding with the agency, if after November 22. The agency will provide additional information regarding what information or documentation will be needed and how you can request of the agency a legally required exception from this requirement.
Education
If you are using Education to qualify for this position,
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an .
group id: DOA
