Today
Secret
Unspecified
Unspecified
Construction/Facilities
Eglin AFB, FL (On-Site/Office)
Job Description
ELECTRONICS TECHNICIAN, MAINTENANCE III
TM, ERCC #2, Bldg. 11151(B-4B), Eglin AFB, FL
Open Position Request Number: R-47-25
CLASSIFICATION: Electronics Technician Maintenance III; CBA Rate $37.87/Hr
GRADE: Non-Exempt; Regular Full-time
LOCATION: Eglin AFB, FL - On Site
POSTING DATE: Internal Applicants Only (06/26/2025) / External Applicants (07/03/2025)
ESSENTIAL FUNCTIONS: Must be familiar with RF principles and able to use applicable test equipment such as multimeters, oscilloscopes, spectrum analyzers, signal generators, spectrum analyzers, power meters, frequency counters, etc. Must be able to read technical data and schematic diagrams without assistance. Must have a working knowledge of antennas. Applicants must be able and willing to adhere to all applicable safety and environmental policies as well as wear of personal protective equipment such as safety glasses, ear plugs, harnesses, etc.
GENERAL DUTIES:
OTHER DUTIES: Must be able to obtain and maintain a secret security clearance and national agency check (NAC). Adheres to all USAF, State and company laws, regulations, policies and procedures. Will be required to work overtime, weekends, and holidays as needed.
EDUCATION/EXPERIENCE REQUIREMENTS: Must be a technical or service school graduate in electronics and have five years' experience as an Electronics Technician. Possession of a CDL Class "B" or "C" is a plus. A current Electronics Technician Certification is a plus. Minimum five years' experience as an Electronics Tech working in a radio frequency (RF) systems field is de- sired. Telemetry data collection or related systems experience, e.g. tracking radar, passive aircraft tracking, highly desired.
OTHER REQUIREMENTS: Candidate must be able to obtain and maintain a secret security clearance and a national agency check (NAC). Adheres to all USAF, State, and company laws, regulations, policies, and procedures.
WORK ENVIRONMENT: M ay perform work assignments in a temperature and humidity-controlled environment. Some tasks and assignments such as the installation; operation; and maintenance of mobile systems, aircraft systems, or range instrumentation will require work performance in outside environments in heat or cold with exposure to the conditions typical of various work locations.
PHYSICAL DEMANDS: Must be able to climb all antenna towers, ladders/safety devices to heights of 45 to 100 feet, and lift 50 pounds unassisted.
Note: The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this classification. They are not intended to be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this position.
Reliance Test & Technology, LLC is proud to be an Affirmative Action & Equal Employment Opportunity Employer. Reliance Test & Technology, LLC is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding, or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state, or local laws or protected class.
Reliance Test & Technology, LLC maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Any person with a disability needing special accommodation for the application process please contact Human Resources.
Applicants must currently hold or be able to obtain and maintain the proper US DoD issued security clearance, which requires US Citizenship. Security clearance eligibility may be discussed during the interview phase. Employment and start date are contingent upon the candidate receiving the required US DoD issued interim security clearance.
ELECTRONICS TECHNICIAN, MAINTENANCE III
TM, ERCC #2, Bldg. 11151(B-4B), Eglin AFB, FL
Open Position Request Number: R-47-25
CLASSIFICATION: Electronics Technician Maintenance III; CBA Rate $37.87/Hr
GRADE: Non-Exempt; Regular Full-time
LOCATION: Eglin AFB, FL - On Site
POSTING DATE: Internal Applicants Only (06/26/2025) / External Applicants (07/03/2025)
ESSENTIAL FUNCTIONS: Must be familiar with RF principles and able to use applicable test equipment such as multimeters, oscilloscopes, spectrum analyzers, signal generators, spectrum analyzers, power meters, frequency counters, etc. Must be able to read technical data and schematic diagrams without assistance. Must have a working knowledge of antennas. Applicants must be able and willing to adhere to all applicable safety and environmental policies as well as wear of personal protective equipment such as safety glasses, ear plugs, harnesses, etc.
GENERAL DUTIES:
- Receives work assignments from the supervisor or more qualified technicians.
- Primary duties are inspection, maintenance, modification, repair, and operation of mobile and fixed site telemetry collection systems.
- Will be subject to cross-utilization in areas such as (but not limited to) ground-to-air radios, microwave communications and radar systems.
- Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, installing wiring, and tracing relationships in signal flow using complex test instruments.
- Will be required to remove, lift, carry, and replace system components up to 50 lbs unassisted.
- Will be required to climb ladders, towers, platforms, etc. to facilitate maintenance and repair of antennas and related electronic or mechanical systems.
OTHER DUTIES: Must be able to obtain and maintain a secret security clearance and national agency check (NAC). Adheres to all USAF, State and company laws, regulations, policies and procedures. Will be required to work overtime, weekends, and holidays as needed.
EDUCATION/EXPERIENCE REQUIREMENTS: Must be a technical or service school graduate in electronics and have five years' experience as an Electronics Technician. Possession of a CDL Class "B" or "C" is a plus. A current Electronics Technician Certification is a plus. Minimum five years' experience as an Electronics Tech working in a radio frequency (RF) systems field is de- sired. Telemetry data collection or related systems experience, e.g. tracking radar, passive aircraft tracking, highly desired.
OTHER REQUIREMENTS: Candidate must be able to obtain and maintain a secret security clearance and a national agency check (NAC). Adheres to all USAF, State, and company laws, regulations, policies, and procedures.
WORK ENVIRONMENT: M ay perform work assignments in a temperature and humidity-controlled environment. Some tasks and assignments such as the installation; operation; and maintenance of mobile systems, aircraft systems, or range instrumentation will require work performance in outside environments in heat or cold with exposure to the conditions typical of various work locations.
PHYSICAL DEMANDS: Must be able to climb all antenna towers, ladders/safety devices to heights of 45 to 100 feet, and lift 50 pounds unassisted.
Note: The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this classification. They are not intended to be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this position.
Reliance Test & Technology, LLC is proud to be an Affirmative Action & Equal Employment Opportunity Employer. Reliance Test & Technology, LLC is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding, or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state, or local laws or protected class.
Reliance Test & Technology, LLC maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Any person with a disability needing special accommodation for the application process please contact Human Resources.
Applicants must currently hold or be able to obtain and maintain the proper US DoD issued security clearance, which requires US Citizenship. Security clearance eligibility may be discussed during the interview phase. Employment and start date are contingent upon the candidate receiving the required US DoD issued interim security clearance.
group id: 90987667
