Today
Secret
Unspecified
None
Construction/Facilities
Anchorage, AK (On-Site/Office)
Duties
Performs functional tests, analyzes performance and malfunctions, removes, installs, tests, maintains, modifies, performs alignments and troubleshoots the electronic, electrical, mechanical and hydraulic assemblies, modules, and interconnecting cables of a variety of combat and tactical equipment to include the M1 series main battle tank, M2/3 series Bradley fighting vehicle, Multiple Launch Rocket System (MLRS), TOW Missile System and the ATACMS Launch Loader Module (LLM). Utilizes Integrated Family Test Equipment (IFTE), Built In Test Equipment (BITE) and break out boxes (BOB) for fault isolation, verification, or adjustment of assemblies and modules. Repairs or replaces chassis mounted components on Unit Under Test (UUT). Performs Automatic Test Equipment (ATE) operations for fault isolation on LLM electronic modules, circuit cards, and assemblies to component level. Replaces faulty components on UUT printed circuit boards and power distribution systems.
Troubleshoots and repairs launch pod/container (LP/C), trainer rocket simulator modules, Missiles/Launchers Pod Assembly (M/LPA), trainer missile simulator modules, and various like items. Troubleshoots carrier electrical and power distributions systems as an integrated subsystem of the weapon system or equipment being repaired. Isolates faulty assemblies, cables, wiring harnesses and modules to component level for repair or replacement. Insures proper integration of information between carrier, Fire Control System (FCS), vehicle and equipment hydraulic and mechanical systems, secure digital communications system, and intercommunications system. Installs equipment modifications to system per technical work orders. Performs initial and final checks and may perform inspections when required of designated systems. May act as quality assurance/control inspector for other mechanics' work.
Performs field and limited sustainment maintenance to include installation, routine maintenance, repair, and overhaul of fixed and mobile operational communication and electronics systems, e.g., shelter mounted AM radio and teletype systems, shelter mounted single side band radio and teletype systems, shelter mounted radio relay and terminal systems, complex radar systems, interrogators, gun, rocket, and missile fire control, directional and digital computer systems, peripheral equipment, and related test equipment, and Modification Table Of Equipment (MTOE) authorized automation equipment. Repairs, aligns, and adjusts missile guidance control systems, infrared night vision sights, optical sights, and traversing units. Removes and replaces defective electrical, electronic, and mechanical components. Conducts inspections, diagnoses nature and extent of equipment malfunction. Determines whether equipment may be economically repaired or declared unserviceable, and performs required maintenance to restore to a serviceable condition various types of tactical computers, radio sets, and similar items. Repairs or salvages defective components. Isolates and diagnoses cause of circuit/component malfunction using signal string lists, schematics, standard, special, and electronic Test Measurement and Diagnostic Equipment (TMDE) or repair equipment. Uses associated field maintenance equipment in analytical maintenance procedures. Interprets complex schematic diagrams. Must exercise a high degree of judgment regarding methods and procedures for completing assignments, which may involve extending the use of conventional tools and equipment and improving changes to techniques, and procedures to reach specified parameters when factors such as temperature extremes, aging of equipment, or modification of circuits have changed operating conditions. Installs and applies equipment modifications when directed.
Uses various types of test equipment to include systems test sets and stands such as AN/GRM-122s, frequency meters, standing wave indicators, oscillators, ohmmeters, voltmeters, resistance bridges, and signal generators to localize trouble by component unit, by circuit within a component, and by element of a circuit. Uses special and common hand tools, power tools, and gauges to make intricate repairs. Fabricates items and parts for repair of mechanical and electronic equipment.
Performs administrative functions in establishing and maintaining maintenance records on equipment maintained or repaired. Assists in the preparation of requests for required repair parts.
May conduct or be involved in a Maintenance Assistance and Instruction Team (MAIT) or act as an inspector on a Command Maintenance Evaluation Team (COMET) on electronic, automation, communication, and equipment. Provides technical assistance and instruction to units throughout the state so that they will be able to operate at the desired level of proficiency.
Performs other duties as assigned.
Requirements
Conditions of Employment
GENERAL EXPERIENCE is experience or training which demonstrates the applicant's knowledge of electrical or electronic theory, knowledge of common testing procedures, skill in the use of hand tools of the electronics trade, and skill in reading schematics.
SPECIALIZED EXPERIENCE is experience or training in utilizing principles, basic functions, and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.
WG-08: Specialized Experience - Must have 12 months of experience or training in utilizing principles, basic functions, and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in using hand tools, power tools, and gauges to make intricate repairs. Experience in using diagnostic and testing equipment. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.
WG-11: Specialized Experience - Must have at least 18 months of experience or training in utilizing principles, basic functions, and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.
EXPERIENCE REQUIREMENTS:
Resume must have complete dates and hours worked per week for each occurrence of both civilian and military employment (Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) Use of year only will result in disqualification. The duties listed must fully substantiate -in your own words- that you meet the minimum requirements and specialized experience listed above, in detail; otherwise, you will not be considered qualified for this position.
Length of time is not of itself qualifying. Your experience will be evaluated on the basis of duties performed. Your record of experience and/or training must show possession of the following knowledge, skills and abilities needed to fully perform the duties of the position:
- Comprehensive knowledge of operating electronic principles such as circuit elements, digital logic, microprocessors, core memory, interface circuits, digital data transmission, microwave, antennas, signal behavior, amplification, and display.
- Ability to troubleshoot, install, repair, and maintain complex electronic systems where circuit theory must be used to understand the operation of individual circuits. Skill in developing new test and repair procedures for which none exist, and when possible improving existing procedures.
- Ability to understand the interaction of a number of complex, interrelated circuits to determine the cause of a malfunction and the interaction of various factors.
- Extensive knowledge of electromechanical servo systems, pneumatics, hydraulics, and mechanical and electric motor systems and their effect on each other.
- Skill in interpreting complex drawings, specifications, and schematics of complete systems to recognize the function and interconnections of the various assemblies and troubleshoot the systems from schematic, following signal paths trough a complex path of interconnections of components, assemblies, subassemblies, and connecting cable harnesses.
- Knowledge and skill to modify systems by adding, altering, or removing components in order to standardize or alter the purpose of the equipment or to incorporate new features developed since the equipment was manufactured.
- Skill in using a wide variety of electronic test equipment such as systems test sets, frequency meters, standing wave indicators, oscillators, ohmmeters, voltmeters, resistance bridges, and signal generators, and the use of special and common hand tools, power tools, and gauges. Skill in applying this knowledge to adapt test procedures to available test equipment, to develop time efficient means to return equipment to operation.
- Skill in using gunner's quadrants, transits, levels, and theodolites to survey LP/C, M/LPA mounts, and SRP/PDS mounting bolts for exactness. Skill to use recovery-rigging techniques to attach/secure hoists, slings, and lifting devices using authorized equipment to accomplish repairs.
- Ability to switch from one theory of operations to another or to combine theories depending on the type of system being repaired.
- Skill and knowledge to provide technical assistance and instruction.
Additional information
- The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
- If you are a current Federal employee or former Federal employee, you must submit a copy of your latest SF-50 "Notification of Personnel Action" and/or a copy of the SF-50. You may submit your most recent performance appraisal.
- The National Guard is exempt from the Veterans Preference Act. Submission of a copy of your DD-214 is not required unless you are hired for technician position.
- If you are a male applicant who was born after 12/31/59 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
- Direct Deposit Program: If selected for technician position with the Alaska National Guard, you will be required to participate in the Direct Deposit Program. (Salary will be automatically deposited to bank/credit union account).
- Military Bonuses And Student Loan Repayment Program: If you are selected for this position, you should always check with your servicing incentive manager (AKARNG - J1 or AKANG - Retention Office) to verify how accepting this position will affect your entitlement prior to considering an offer of employment.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the application process is complete, a review of your application/resume will be made to determine your Area of Consideration (AOC) and to ensure you meet the basic eligibility and minimum job requirements. Your initial rating will be based on your responses to the questionnaire in this document. This process measures the degree to which your background matches the knowledge, skills and abilities required for this position. Your final rating will be based on our evaluation of your responses, as verified through a review of your resume and other supporting documents. If, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your score can and will be adjusted to more accurately reflect your abilities. Please follow all instructions carefully. Errors or omissions may affect your eligibility and rating.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
Electrical, Knowledge of Equipment Assembly, Installation, Repair, etc., and Mechanical
To determine your qualifications for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates of employment and duties performed.
2. Questionnaire. This is accomplished by submitting the application. There is nothing that needs to be attached to this application to meet this requirement.
3. Any additional documentation you wish to submit for consideration.
Your resume, curriculum vitae, the Optional Application for Federal Employment (OF 612), or any other written format you choose to describe your job-related qualifications can be submitted electronically using the document upload process. We recommend using the resume building within USAJOBS. Please log into USAJOBS, go to your "Documents", make sure you're in the "Resumes" section and select the "Upload or build resume" button, then click on "Build resume". Please be sure to include all of the following information in your resume:
Job Information:
- Vacancy Identification Number, title, grade and location for which you are applying.
Personal Information:
- Full name, mailing address (with zip code) and day/evening telephone numbers (with area code).
- Country of Citizenship.
- If ever employed by the Federal Government, please show the highest Federal civilian grade held, job series, and dates of employment in grade.
Education:
- High School name, city, state and zip code, date of diploma or GED.
- Colleges and/or Universities attended, city, state and zip code.
- Major field(s) of study.
- Type and year of degree(s) received. If no degree received, show total credit hours received in semester or quarter hours.
Work Experience for each paid or non-paid position held related to the job for which you are applying (do not provide copies of job descriptions):
- Job title.
- Duties and accomplishments.
- Number of hours per week.
- Employer's name and address.
- Supervisor's name and phone number.
- Indicate if your current supervisor may be contacted.
- Starting and ending dates of employment (month and year).
- Salary.
Other Qualifications:
- Job-related training courses (title and year).
- Job-related skills (e.g., other languages, computer software/hardware, tools, machinery, typing speed, etc.)
- Job related certificates and licenses.
- Job-related honors, awards, and special accomplishments. (e.g., publications, memberships in professional or honor societies, leadership activities, public speaking, performance awards, etc.)
Do not send copies of documents unless specifically requested.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Jennifer Francione
Phone 907-428-6462 Email jennifer.r.francione.civ@army.mil
Address Alaska Army National Guard
P.O Box 5800
JBER, AK 99505
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. Referral to the hiring official will be IAW our agency Merit Promotion Plan and current Labor agreement. Qualified applicants may be further evaluated by a ranking panel. Referred candidates will be further evaluated and interviewed by a selection panel.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
Performs functional tests, analyzes performance and malfunctions, removes, installs, tests, maintains, modifies, performs alignments and troubleshoots the electronic, electrical, mechanical and hydraulic assemblies, modules, and interconnecting cables of a variety of combat and tactical equipment to include the M1 series main battle tank, M2/3 series Bradley fighting vehicle, Multiple Launch Rocket System (MLRS), TOW Missile System and the ATACMS Launch Loader Module (LLM). Utilizes Integrated Family Test Equipment (IFTE), Built In Test Equipment (BITE) and break out boxes (BOB) for fault isolation, verification, or adjustment of assemblies and modules. Repairs or replaces chassis mounted components on Unit Under Test (UUT). Performs Automatic Test Equipment (ATE) operations for fault isolation on LLM electronic modules, circuit cards, and assemblies to component level. Replaces faulty components on UUT printed circuit boards and power distribution systems.
Troubleshoots and repairs launch pod/container (LP/C), trainer rocket simulator modules, Missiles/Launchers Pod Assembly (M/LPA), trainer missile simulator modules, and various like items. Troubleshoots carrier electrical and power distributions systems as an integrated subsystem of the weapon system or equipment being repaired. Isolates faulty assemblies, cables, wiring harnesses and modules to component level for repair or replacement. Insures proper integration of information between carrier, Fire Control System (FCS), vehicle and equipment hydraulic and mechanical systems, secure digital communications system, and intercommunications system. Installs equipment modifications to system per technical work orders. Performs initial and final checks and may perform inspections when required of designated systems. May act as quality assurance/control inspector for other mechanics' work.
Performs field and limited sustainment maintenance to include installation, routine maintenance, repair, and overhaul of fixed and mobile operational communication and electronics systems, e.g., shelter mounted AM radio and teletype systems, shelter mounted single side band radio and teletype systems, shelter mounted radio relay and terminal systems, complex radar systems, interrogators, gun, rocket, and missile fire control, directional and digital computer systems, peripheral equipment, and related test equipment, and Modification Table Of Equipment (MTOE) authorized automation equipment. Repairs, aligns, and adjusts missile guidance control systems, infrared night vision sights, optical sights, and traversing units. Removes and replaces defective electrical, electronic, and mechanical components. Conducts inspections, diagnoses nature and extent of equipment malfunction. Determines whether equipment may be economically repaired or declared unserviceable, and performs required maintenance to restore to a serviceable condition various types of tactical computers, radio sets, and similar items. Repairs or salvages defective components. Isolates and diagnoses cause of circuit/component malfunction using signal string lists, schematics, standard, special, and electronic Test Measurement and Diagnostic Equipment (TMDE) or repair equipment. Uses associated field maintenance equipment in analytical maintenance procedures. Interprets complex schematic diagrams. Must exercise a high degree of judgment regarding methods and procedures for completing assignments, which may involve extending the use of conventional tools and equipment and improving changes to techniques, and procedures to reach specified parameters when factors such as temperature extremes, aging of equipment, or modification of circuits have changed operating conditions. Installs and applies equipment modifications when directed.
Uses various types of test equipment to include systems test sets and stands such as AN/GRM-122s, frequency meters, standing wave indicators, oscillators, ohmmeters, voltmeters, resistance bridges, and signal generators to localize trouble by component unit, by circuit within a component, and by element of a circuit. Uses special and common hand tools, power tools, and gauges to make intricate repairs. Fabricates items and parts for repair of mechanical and electronic equipment.
Performs administrative functions in establishing and maintaining maintenance records on equipment maintained or repaired. Assists in the preparation of requests for required repair parts.
May conduct or be involved in a Maintenance Assistance and Instruction Team (MAIT) or act as an inspector on a Command Maintenance Evaluation Team (COMET) on electronic, automation, communication, and equipment. Provides technical assistance and instruction to units throughout the state so that they will be able to operate at the desired level of proficiency.
Performs other duties as assigned.
Requirements
Conditions of Employment
- Alaska Army National Guard membership is required.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a probationary period.
- U.S. Citizenship and Secret Clearance is required.
- Bargaining Unit: Non- Bargaining
- If hired, this position may require regular Occupational Health exams and/or medical standards being met.
- APPOINTMENT FACTORS: Excepted/Enlisted in the Alaska Army National Guard.
- MILITARY GRADE REQUIREMENT: Due to the nature of this position, the minimum military grade requirement is Specialist (SPC/E-4), and the maximum military grade requirement is Sergeant Major (SGM/E-9).
- Must be able to obtain and maintain the appropriate security clearance of the position.
- Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
- Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- Desirables: Valid Civilian and Military Driver's License
GENERAL EXPERIENCE is experience or training which demonstrates the applicant's knowledge of electrical or electronic theory, knowledge of common testing procedures, skill in the use of hand tools of the electronics trade, and skill in reading schematics.
SPECIALIZED EXPERIENCE is experience or training in utilizing principles, basic functions, and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.
WG-08: Specialized Experience - Must have 12 months of experience or training in utilizing principles, basic functions, and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in using hand tools, power tools, and gauges to make intricate repairs. Experience in using diagnostic and testing equipment. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.
WG-11: Specialized Experience - Must have at least 18 months of experience or training in utilizing principles, basic functions, and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.
EXPERIENCE REQUIREMENTS:
Resume must have complete dates and hours worked per week for each occurrence of both civilian and military employment (Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) Use of year only will result in disqualification. The duties listed must fully substantiate -in your own words- that you meet the minimum requirements and specialized experience listed above, in detail; otherwise, you will not be considered qualified for this position.
Length of time is not of itself qualifying. Your experience will be evaluated on the basis of duties performed. Your record of experience and/or training must show possession of the following knowledge, skills and abilities needed to fully perform the duties of the position:
- Comprehensive knowledge of operating electronic principles such as circuit elements, digital logic, microprocessors, core memory, interface circuits, digital data transmission, microwave, antennas, signal behavior, amplification, and display.
- Ability to troubleshoot, install, repair, and maintain complex electronic systems where circuit theory must be used to understand the operation of individual circuits. Skill in developing new test and repair procedures for which none exist, and when possible improving existing procedures.
- Ability to understand the interaction of a number of complex, interrelated circuits to determine the cause of a malfunction and the interaction of various factors.
- Extensive knowledge of electromechanical servo systems, pneumatics, hydraulics, and mechanical and electric motor systems and their effect on each other.
- Skill in interpreting complex drawings, specifications, and schematics of complete systems to recognize the function and interconnections of the various assemblies and troubleshoot the systems from schematic, following signal paths trough a complex path of interconnections of components, assemblies, subassemblies, and connecting cable harnesses.
- Knowledge and skill to modify systems by adding, altering, or removing components in order to standardize or alter the purpose of the equipment or to incorporate new features developed since the equipment was manufactured.
- Skill in using a wide variety of electronic test equipment such as systems test sets, frequency meters, standing wave indicators, oscillators, ohmmeters, voltmeters, resistance bridges, and signal generators, and the use of special and common hand tools, power tools, and gauges. Skill in applying this knowledge to adapt test procedures to available test equipment, to develop time efficient means to return equipment to operation.
- Skill in using gunner's quadrants, transits, levels, and theodolites to survey LP/C, M/LPA mounts, and SRP/PDS mounting bolts for exactness. Skill to use recovery-rigging techniques to attach/secure hoists, slings, and lifting devices using authorized equipment to accomplish repairs.
- Ability to switch from one theory of operations to another or to combine theories depending on the type of system being repaired.
- Skill and knowledge to provide technical assistance and instruction.
Additional information
- The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
- If you are a current Federal employee or former Federal employee, you must submit a copy of your latest SF-50 "Notification of Personnel Action" and/or a copy of the SF-50. You may submit your most recent performance appraisal.
- The National Guard is exempt from the Veterans Preference Act. Submission of a copy of your DD-214 is not required unless you are hired for technician position.
- If you are a male applicant who was born after 12/31/59 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
- Direct Deposit Program: If selected for technician position with the Alaska National Guard, you will be required to participate in the Direct Deposit Program. (Salary will be automatically deposited to bank/credit union account).
- Military Bonuses And Student Loan Repayment Program: If you are selected for this position, you should always check with your servicing incentive manager (AKARNG - J1 or AKANG - Retention Office) to verify how accepting this position will affect your entitlement prior to considering an offer of employment.
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the application process is complete, a review of your application/resume will be made to determine your Area of Consideration (AOC) and to ensure you meet the basic eligibility and minimum job requirements. Your initial rating will be based on your responses to the questionnaire in this document. This process measures the degree to which your background matches the knowledge, skills and abilities required for this position. Your final rating will be based on our evaluation of your responses, as verified through a review of your resume and other supporting documents. If, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your score can and will be adjusted to more accurately reflect your abilities. Please follow all instructions carefully. Errors or omissions may affect your eligibility and rating.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
Electrical, Knowledge of Equipment Assembly, Installation, Repair, etc., and Mechanical
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. - Required Documents
As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.
To determine your qualifications for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates of employment and duties performed.
2. Questionnaire. This is accomplished by submitting the application. There is nothing that needs to be attached to this application to meet this requirement.
3. Any additional documentation you wish to submit for consideration.
Your resume, curriculum vitae, the Optional Application for Federal Employment (OF 612), or any other written format you choose to describe your job-related qualifications can be submitted electronically using the document upload process. We recommend using the resume building within USAJOBS. Please log into USAJOBS, go to your "Documents", make sure you're in the "Resumes" section and select the "Upload or build resume" button, then click on "Build resume". Please be sure to include all of the following information in your resume:
Job Information:
- Vacancy Identification Number, title, grade and location for which you are applying.
Personal Information:
- Full name, mailing address (with zip code) and day/evening telephone numbers (with area code).
- Country of Citizenship.
- If ever employed by the Federal Government, please show the highest Federal civilian grade held, job series, and dates of employment in grade.
Education:
- High School name, city, state and zip code, date of diploma or GED.
- Colleges and/or Universities attended, city, state and zip code.
- Major field(s) of study.
- Type and year of degree(s) received. If no degree received, show total credit hours received in semester or quarter hours.
Work Experience for each paid or non-paid position held related to the job for which you are applying (do not provide copies of job descriptions):
- Job title.
- Duties and accomplishments.
- Number of hours per week.
- Employer's name and address.
- Supervisor's name and phone number.
- Indicate if your current supervisor may be contacted.
- Starting and ending dates of employment (month and year).
- Salary.
Other Qualifications:
- Job-related training courses (title and year).
- Job-related skills (e.g., other languages, computer software/hardware, tools, machinery, typing speed, etc.)
- Job related certificates and licenses.
- Job-related honors, awards, and special accomplishments. (e.g., publications, memberships in professional or honor societies, leadership activities, public speaking, performance awards, etc.)
Do not send copies of documents unless specifically requested.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. - How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Jennifer Francione
Phone 907-428-6462 Email jennifer.r.francione.civ@army.mil
Address Alaska Army National Guard
P.O Box 5800
JBER, AK 99505
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. Referral to the hiring official will be IAW our agency Merit Promotion Plan and current Labor agreement. Qualified applicants may be further evaluated by a ranking panel. Referred candidates will be further evaluated and interviewed by a selection panel. - Fair and Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
To determine your qualifications for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates of employment and duties performed.
2. Questionnaire. This is accomplished by submitting the application. There is nothing that needs to be attached to this application to meet this requirement.
3. Any additional documentation you wish to submit for consideration.
Your resume, curriculum vitae, the Optional Application for Federal Employment (OF 612), or any other written format you choose to describe your job-related qualifications can be submitted electronically using the document upload process. We recommend using the resume building within USAJOBS. Please log into USAJOBS, go to your "Documents", make sure you're in the "Resumes" section and select the "Upload or build resume" button, then click on "Build resume". Please be sure to include all of the following information in your resume:
Job Information:
- Vacancy Identification Number, title, grade and location for which you are applying.
Personal Information:
- Full name, mailing address (with zip code) and day/evening telephone numbers (with area code).
- Country of Citizenship.
- If ever employed by the Federal Government, please show the highest Federal civilian grade held, job series, and dates of employment in grade.
Education:
- High School name, city, state and zip code, date of diploma or GED.
- Colleges and/or Universities attended, city, state and zip code.
- Major field(s) of study.
- Type and year of degree(s) received. If no degree received, show total credit hours received in semester or quarter hours.
Work Experience for each paid or non-paid position held related to the job for which you are applying (do not provide copies of job descriptions):
- Job title.
- Duties and accomplishments.
- Number of hours per week.
- Employer's name and address.
- Supervisor's name and phone number.
- Indicate if your current supervisor may be contacted.
- Starting and ending dates of employment (month and year).
- Salary.
Other Qualifications:
- Job-related training courses (title and year).
- Job-related skills (e.g., other languages, computer software/hardware, tools, machinery, typing speed, etc.)
- Job related certificates and licenses.
- Job-related honors, awards, and special accomplishments. (e.g., publications, memberships in professional or honor societies, leadership activities, public speaking, performance awards, etc.)
Do not send copies of documents unless specifically requested.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Jennifer Francione
Phone 907-428-6462 Email jennifer.r.francione.civ@army.mil
Address Alaska Army National Guard
P.O Box 5800
JBER, AK 99505
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. Referral to the hiring official will be IAW our agency Merit Promotion Plan and current Labor agreement. Qualified applicants may be further evaluated by a ranking panel. Referred candidates will be further evaluated and interviewed by a selection panel.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
group id: DOA
