Job Requirements
Hickam AFB, HI
Secret Polygraph Unspecified
Career Level not specified
Salary not specified
Join Premium to unlock estimated salaries
Job Description
Duties
- Leads a team of trades and/or lobar workers.
- Performs work. Performs nonsupervisory trades and/or labor work that is usually of the same kind and level as members of the work crew led.
- Ensures proper tool control procedures are followed. Monitors mechanics using trade tools such as wire strippers, drills, files, soldering irons, and micro soldering units to remove and replace parts.
-Ensures safety practices and procedures are in accordance with established safety rules and regulations and maintains a safe and clean work environment.
- Provides advice and technical assistance to mechanics and supported organizations. Schedules equipment for calibration in accordance with established Technical Orders, policies and procedures.
Requirements
Conditions of employment
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2600, Electronic Equipment Installation and Maintenance Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to lead and supervise.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
I. Working knowledge of a wide range of principles, processes. and techniques of trade(s) and/or craft(s)
2. Knowledge of safety regulations. practices. and procedures.
3. Knowle* of the use and maintenance of tools, equipment. and equipment common to trades and labor work performed by the group being led.
4. Skill in performing the trade and Ior labor work of the group led.
5. Ability to lead a team of three or more labor or trade employees.
6. Ability to plan and organize work asE01ments to include determining resources required to accomplish mission.
Physical Effort:
Frequently lifts and carries, unassisted, items weighing up to 40 pounds. Sometimes required to lift and carry items weighing more than 40 pounds with the help of weight handling equipment or with assistance from other workers. The work requires working in a sitting position for extended periods of time, and frequent standing, walking, bending, crouching, reaching, and stooping is required. Some work may require the aid of magnifying lenses, eye loops, and microscopes to accomplish repairs on miniature components.
Working Conditions:
Employee typically works in well lighted, heated, and ventilated areas. May be required to work at remote user locations under variable conditions or within clean room environments where special garments including head coverings, shoe coverings, and gloves are required. Exposed to the possibility of electric shock; burns from electrical or RF energy or hot solder; and cuts and bruises.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Incentives: Recruitment and/or retention incentives may or may not be used.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
- Leads a team of trades and/or lobar workers.
- Performs work. Performs nonsupervisory trades and/or labor work that is usually of the same kind and level as members of the work crew led.
- Ensures proper tool control procedures are followed. Monitors mechanics using trade tools such as wire strippers, drills, files, soldering irons, and micro soldering units to remove and replace parts.
-Ensures safety practices and procedures are in accordance with established safety rules and regulations and maintains a safe and clean work environment.
- Provides advice and technical assistance to mechanics and supported organizations. Schedules equipment for calibration in accordance with established Technical Orders, policies and procedures.
Requirements
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- This posn is subject to provisions of the DoD Priority Placement Program
- Disclosure of Political Appointments
- Direct Deposit: All federal employees are required to have direct deposit
- Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period
- Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest
- The work requires the employee to drive a motor vehicle. An appropriate. valid driver's license will be required for the position
- Work may occasionally require travel away from the normal duty station on military or commercial aircraft
- The employee may be required to work other than normal duty hours. which may ildude evenings. weekends. and/or holidays and 'or overtime. Subject to call back to meet emergency situations
- This work may require some exposure to work under adverse environmental conditions
- Incumbent may be required to take part in mobility exercises and contingency operations
- Color Vision: Normal color vision as defined in AFI 48-123, Medical Examination and Standards. Must be able to obtain and maintain a Secret Clearance
- This position has been designated by the Air Force as a Testing Designated Position (TOP) under the Air Force Civilian Drug Demand Reduction Program Employee must pass initial and periodic short notice drug testing
- Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety
- The duties of this meets all requirements as a category 4 designation, and shall not be vacated during a national emergency or mobilization without seriously impairing the capability of the parent Federal Agency or office to function effectively
- This position must be removed from the Ready Reserve and CAN NOT become a member of the Ready Reserve. (IAW DoDD 1200_7 , • Screening the Ready Reserve,") this is Key position
- This is a Mission Essential (ME) position performing a Mission Critical Function (MCF) which must continue uninterrupted after the occurrence of an emergency and continued through full resumption of all functions
- IAW. DoDI 302042, Defense Continuity Programs.
- May be assigned other additional duties as required
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2600, Electronic Equipment Installation and Maintenance Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to lead and supervise.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
I. Working knowledge of a wide range of principles, processes. and techniques of trade(s) and/or craft(s)
2. Knowledge of safety regulations. practices. and procedures.
3. Knowle* of the use and maintenance of tools, equipment. and equipment common to trades and labor work performed by the group being led.
4. Skill in performing the trade and Ior labor work of the group led.
5. Ability to lead a team of three or more labor or trade employees.
6. Ability to plan and organize work asE01ments to include determining resources required to accomplish mission.
Physical Effort:
Frequently lifts and carries, unassisted, items weighing up to 40 pounds. Sometimes required to lift and carry items weighing more than 40 pounds with the help of weight handling equipment or with assistance from other workers. The work requires working in a sitting position for extended periods of time, and frequent standing, walking, bending, crouching, reaching, and stooping is required. Some work may require the aid of magnifying lenses, eye loops, and microscopes to accomplish repairs on miniature components.
Working Conditions:
Employee typically works in well lighted, heated, and ventilated areas. May be required to work at remote user locations under variable conditions or within clean room environments where special garments including head coverings, shoe coverings, and gloves are required. Exposed to the possibility of electric shock; burns from electrical or RF energy or hot solder; and cuts and bruises.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Incentives: Recruitment and/or retention incentives may or may not be used.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
group id: DODAF