Job Requirements
Saint Paul, MN
Secret Polygraph Unspecified
Career Level not specified
Salary not specified
Join Premium to unlock estimated salaries 
Job Description
Duties
Major Duties: This is not an all-inclusive list
A ELECTRONIC INTEGRATED SYSTEMS MECHANIC (T32), WG, 2610, 13,
On a day-to-day basis, analyzes performance, tests, inspects, troubleshoots, identifies and isolates malfunctions, disassembles, modifies or repairs and reassembles test stations or ECM Pods and their associated peripherals. Considers the complex interrelated variables arising from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems. Analyzes malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings. Diagnoses circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics. Isolates problems to the failing part using self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment. Removes and replaces components, assemblies, subassemblies, or parts using special and common hand tools, soldering devices and special electronic instruments. (20%)
May modify and updates avionics Pods, support equipment and support software according to applicable technical publications. Analyzes program data and determines if the criteria is sufficient to provide adequate testing and troubleshooting. Examines recurring malfunctions and software deficiencies to determine testing voids and initiates corrective action by submission of quality deficiency reports, software deficiency reports or proposed modifications. Devises repair procedures based on findings and recommends program changes, procedural changes, or data corrections to correct software deficiencies. Recommends revisions to intermediate maintenance directives. (20%)
Connects associated testing equipment to interface the test station system to the aircraft system and or Pod to facilitate maintenance/repair of POD or line replaceable units (LRUs) from the avionics systems such as radar, fire control, instrument, flight control, inertial navigation, malfunction analysis and recording equipment systems. Determines whether failures are caused by the unit under test (UUT), the Pod, the test station, or the test program. If the malfunction is found to be in the UUT, Pod or the test station, isolates it to the specific component(s), disassembles and effects repair by replacing solid state devices, micro miniature modules, gyros, sensors, transducers, and any other required parts, and assembles after repair is accomplished and performs operational tests. If the malfunction is in the test program, informs engineers and/or Air Force Logistics Command (AFLC) of the problem and serves as subject matter expert in providing practical technical assistance in resolution. Ensures compatibility of items with each other and with extenders and interfaces. (20%)
Works with engineers and technicians in the development and/or modification of software, interfaces, extender equipment or additional items of test equipment and in validation of technical data concerning the repair, maintenance, and test of the test station and units under test. Initiates technical data changes. Suggests means by which a component or system can be tested more economically or thoroughly and provides practical technical assistance by explaining peculiarities of the program or assemblies of the test station, UUT, interfaces, extenders, test procedures, etc. (20%)
Provides hands-on training instructions to lower grade personnel concerned with repair of computer controlled automatic test equipment, manually controlled test equipment, line replaceable units and aircraft integrated systems. Also provides on-the-job instruction to newly assigned personnel, regardless of grade level. Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections (ORI), Inspector General (IG) inspections, and Unit Effectiveness Inspections and mobility and command support exercises. May be required to perform such additional duties as structural firefighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, or serve as a team member on a board to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. Ensures that material and equipment are properly stored, protected and maintained. (20%)
Performs other duties as assigned
Requirements
Conditions of employment
CONDITIONS OF EMPLOYMENT
***Federal employment suitability as determined by a background investigation*** Upon selection, individuals will undergo a background check to validate suitability for employment with the federal government as permitted by law, regulation, Presidential order or other authority. Suitability is dependent upon the particular requirements for security clearance, sensitivity level, and DOD IT network access . Items checked include, but are not limited to all criminal history record information, employment history, education and fiscal accountability/responsibility.**
MILITARY COMPATIBILITY: Upon selection, individuals will undergo a background check to validate suitability for employment with the federal government as permitted by law, regulation, Presidential order or other authority. Suitability is dependent upon the particular requirements for security clearance, sensitivity level, and DOD IT network access. Items checked include, but are not limited to all criminal history record information, employment history, education and fiscal accountability/responsibility.
The individual selected must be assigned to a compatible military position and must also maintain satisfactory membership in the Minnesota Air National Guard.
Qualifications
In order to qualify, you must meet the experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Do not copy and paste the duties, specialized experience, or occupational assessment questionnaire from this announcement into your resume as that will not be considered a demonstration of your qualifications for this position and you may be rendered disqualified.
MILITARY GRADES : E3 (Amn) to E7 (MSgt)
Your rank must be included in your application.
Failure to obtain a compatible AFSC may result in termination of employment.
GENERAL AND SPECIALIZED EXPERIENCE QUALIFICATIONS REQUIREMENTS:
Description of Work:
The work performed in this series includes duties such as, train, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of complete multiple integrated electronic avionics systems where the results and support accomplish a number of major functions.
Minimum Requirements:
WG - Experience or training which demonstrates the applicant's knowledge to perform duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes. Ability to collect and analyze data effectively, efficiently, and accurately. Able to apply procedures and directives by reading and interpreting material. Ability to communicate clearly and effectively. Applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.
WG-13 and above - Experience or training demonstrating the ability to repair, overhaul, rebuild, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops. Applies comprehensive knowledge of all major units of the complete multisystem, i.e., how they function independently, how they are interfaced in the integrated subsystems, and how the subsystems interact to achieve operating specifications. Able to determine proper sequence of operations and start point in sequential operations in order to pinpoint areas of malfunction. Extensive practical knowledge of the theories and practices of electromagnetic propagation, electronic circuits, computer theory, hydraulic or pneumatic control and power systems, and many other areas covering a wide range of system applications. Broad knowledge of the interactions among a number of closely integrated complex systems. Knowledge of mathematics, including trigonometry, to calculate power relation ships, signal phasing, etc. Ability to interpret drawings for multisystem complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multisystem complex. Ability to isolate malfunctions of complete multiple integrated systems consisting of closely interrelated fire control, bombing-navigation, flight control, countermeasures or similar systems and to determine the methods of repair where extremely complex relationships exist among numerous interconnected units and control circuits not only within the individual control systems but between them as well, requiring complete knowledge of all electronic, mechanical, and or optical systems and units. Performs on-equipment or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft, and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems.
Additional applicable job element factors: Knowledge of Equipment Assembly, Installation, Repair, etc., Use of Test Equipment: Electronics, Theory of Electronics, Ability To Use Hand and Power Tools -Electronics, Trouble shooting (Electronic Equipment), Ingenuity (Ability To Suggest and Apply New Methods)
Experience requirements: Resume must have complete dates, work schedule, and/or hours worked per week for both civilian and military employment. (Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) Use of year only and unspecified work schedule will result in disqualification. Each applicant must fully substantiate -in their own words- that they meet 100% of the minimum requirements and specialized experience listed above in detail; otherwise, the applicant will be considered unqualified for this position. Do NOT copy and paste from the vacancy announcement or the position description
Education
EDUCATION:
Mandatory military education requirements:
Completion of an Air Force Seven Skill Level Technical Training School and awarded a compatible Seven Skill
Level AFSC, along with the successful completion of at least one military professional education course program.
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Additional information
REMARKS : No PCS available. The military grade of the supervisor must equal or exceed the grade of personnel supervised. Sensitivity Level 2. Participation in direct deposit is mandatory.
Acceptance of a Technician position may result in the termination of your Selected Reserve bonus.
IMPORTANT NOTES :
The Minnesota National Guard (MNNG) is an Equal Opportunity Employer. All qualified applicants will receive consideration for the position without discrimination for any non-merit reason(s) such as race, color, religion, sex, national origin, age, disability, or genetic information. The MNNG will provide applicants and employees with disabilities the same opportunity for employment as enjoyed by individuals without disabilities. The MNNG will provide qualified employees or applicants with Reasonable Accommodations and Personal Assistance Services in accordance with all applicable Federal regulations. Furthermore, pre-selection is not only counter-productive to effective recruitment and placement but also violates Minnesota National Guard Merit Placement principles and will not be tolerated. If you have questions, please contact the Equal Employment Manager at 651-282-4472.
Major Duties: This is not an all-inclusive list
A ELECTRONIC INTEGRATED SYSTEMS MECHANIC (T32), WG, 2610, 13,
On a day-to-day basis, analyzes performance, tests, inspects, troubleshoots, identifies and isolates malfunctions, disassembles, modifies or repairs and reassembles test stations or ECM Pods and their associated peripherals. Considers the complex interrelated variables arising from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems. Analyzes malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings. Diagnoses circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics. Isolates problems to the failing part using self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment. Removes and replaces components, assemblies, subassemblies, or parts using special and common hand tools, soldering devices and special electronic instruments. (20%)
May modify and updates avionics Pods, support equipment and support software according to applicable technical publications. Analyzes program data and determines if the criteria is sufficient to provide adequate testing and troubleshooting. Examines recurring malfunctions and software deficiencies to determine testing voids and initiates corrective action by submission of quality deficiency reports, software deficiency reports or proposed modifications. Devises repair procedures based on findings and recommends program changes, procedural changes, or data corrections to correct software deficiencies. Recommends revisions to intermediate maintenance directives. (20%)
Connects associated testing equipment to interface the test station system to the aircraft system and or Pod to facilitate maintenance/repair of POD or line replaceable units (LRUs) from the avionics systems such as radar, fire control, instrument, flight control, inertial navigation, malfunction analysis and recording equipment systems. Determines whether failures are caused by the unit under test (UUT), the Pod, the test station, or the test program. If the malfunction is found to be in the UUT, Pod or the test station, isolates it to the specific component(s), disassembles and effects repair by replacing solid state devices, micro miniature modules, gyros, sensors, transducers, and any other required parts, and assembles after repair is accomplished and performs operational tests. If the malfunction is in the test program, informs engineers and/or Air Force Logistics Command (AFLC) of the problem and serves as subject matter expert in providing practical technical assistance in resolution. Ensures compatibility of items with each other and with extenders and interfaces. (20%)
Works with engineers and technicians in the development and/or modification of software, interfaces, extender equipment or additional items of test equipment and in validation of technical data concerning the repair, maintenance, and test of the test station and units under test. Initiates technical data changes. Suggests means by which a component or system can be tested more economically or thoroughly and provides practical technical assistance by explaining peculiarities of the program or assemblies of the test station, UUT, interfaces, extenders, test procedures, etc. (20%)
Provides hands-on training instructions to lower grade personnel concerned with repair of computer controlled automatic test equipment, manually controlled test equipment, line replaceable units and aircraft integrated systems. Also provides on-the-job instruction to newly assigned personnel, regardless of grade level. Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections (ORI), Inspector General (IG) inspections, and Unit Effectiveness Inspections and mobility and command support exercises. May be required to perform such additional duties as structural firefighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, or serve as a team member on a board to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. Ensures that material and equipment are properly stored, protected and maintained. (20%)
Performs other duties as assigned
Requirements
Conditions of employment
CONDITIONS OF EMPLOYMENT
- Minnesota Air National Guard Membership is required. If you are not sure you are eligible for military membership, please contact a Air National Guard recruiter prior to applying for this position. Applicants who are not currently a member of the MN Air National Guard must be eligible for immediate membership and employment in the Air National Guard per the military grade(s) listed in this announcement.
- Selectee will be required to wear the military uniform.
- Males born after 31 December 1959 must be registered for Selective Service.
- May be required to successfully complete a probationary period.
- Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
- Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
- Must be able to obtain and maintain the appropriate security clearance of the position.
- Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
***Federal employment suitability as determined by a background investigation*** Upon selection, individuals will undergo a background check to validate suitability for employment with the federal government as permitted by law, regulation, Presidential order or other authority. Suitability is dependent upon the particular requirements for security clearance, sensitivity level, and DOD IT network access . Items checked include, but are not limited to all criminal history record information, employment history, education and fiscal accountability/responsibility.**
MILITARY COMPATIBILITY: Upon selection, individuals will undergo a background check to validate suitability for employment with the federal government as permitted by law, regulation, Presidential order or other authority. Suitability is dependent upon the particular requirements for security clearance, sensitivity level, and DOD IT network access. Items checked include, but are not limited to all criminal history record information, employment history, education and fiscal accountability/responsibility.
The individual selected must be assigned to a compatible military position and must also maintain satisfactory membership in the Minnesota Air National Guard.
Qualifications
In order to qualify, you must meet the experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Do not copy and paste the duties, specialized experience, or occupational assessment questionnaire from this announcement into your resume as that will not be considered a demonstration of your qualifications for this position and you may be rendered disqualified.
MILITARY GRADES : E3 (Amn) to E7 (MSgt)
Your rank must be included in your application.
Failure to obtain a compatible AFSC may result in termination of employment.
GENERAL AND SPECIALIZED EXPERIENCE QUALIFICATIONS REQUIREMENTS:
Description of Work:
The work performed in this series includes duties such as, train, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of complete multiple integrated electronic avionics systems where the results and support accomplish a number of major functions.
Minimum Requirements:
WG - Experience or training which demonstrates the applicant's knowledge to perform duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes. Ability to collect and analyze data effectively, efficiently, and accurately. Able to apply procedures and directives by reading and interpreting material. Ability to communicate clearly and effectively. Applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.
WG-13 and above - Experience or training demonstrating the ability to repair, overhaul, rebuild, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops. Applies comprehensive knowledge of all major units of the complete multisystem, i.e., how they function independently, how they are interfaced in the integrated subsystems, and how the subsystems interact to achieve operating specifications. Able to determine proper sequence of operations and start point in sequential operations in order to pinpoint areas of malfunction. Extensive practical knowledge of the theories and practices of electromagnetic propagation, electronic circuits, computer theory, hydraulic or pneumatic control and power systems, and many other areas covering a wide range of system applications. Broad knowledge of the interactions among a number of closely integrated complex systems. Knowledge of mathematics, including trigonometry, to calculate power relation ships, signal phasing, etc. Ability to interpret drawings for multisystem complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multisystem complex. Ability to isolate malfunctions of complete multiple integrated systems consisting of closely interrelated fire control, bombing-navigation, flight control, countermeasures or similar systems and to determine the methods of repair where extremely complex relationships exist among numerous interconnected units and control circuits not only within the individual control systems but between them as well, requiring complete knowledge of all electronic, mechanical, and or optical systems and units. Performs on-equipment or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft, and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems.
Additional applicable job element factors: Knowledge of Equipment Assembly, Installation, Repair, etc., Use of Test Equipment: Electronics, Theory of Electronics, Ability To Use Hand and Power Tools -Electronics, Trouble shooting (Electronic Equipment), Ingenuity (Ability To Suggest and Apply New Methods)
Experience requirements: Resume must have complete dates, work schedule, and/or hours worked per week for both civilian and military employment. (Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) Use of year only and unspecified work schedule will result in disqualification. Each applicant must fully substantiate -in their own words- that they meet 100% of the minimum requirements and specialized experience listed above in detail; otherwise, the applicant will be considered unqualified for this position. Do NOT copy and paste from the vacancy announcement or the position description
Education
EDUCATION:
Mandatory military education requirements:
Completion of an Air Force Seven Skill Level Technical Training School and awarded a compatible Seven Skill
Level AFSC, along with the successful completion of at least one military professional education course program.
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Additional information
REMARKS : No PCS available. The military grade of the supervisor must equal or exceed the grade of personnel supervised. Sensitivity Level 2. Participation in direct deposit is mandatory.
Acceptance of a Technician position may result in the termination of your Selected Reserve bonus.
IMPORTANT NOTES :
- Should a position be announced at less than the authorized grade, the selected applicant may be non-competitively promoted when he/she meets all qualifications and is submitted for promotion by the supervisor.
- Employment is contingent upon successful completion of technician pre-employment physical for certain occupational series.
- Males applicants born after 31 December 1959 must be registered with the Selective Service System in compliance with the Defense Authorization Act of 1986, Section 1622 ( ).
The Minnesota National Guard (MNNG) is an Equal Opportunity Employer. All qualified applicants will receive consideration for the position without discrimination for any non-merit reason(s) such as race, color, religion, sex, national origin, age, disability, or genetic information. The MNNG will provide applicants and employees with disabilities the same opportunity for employment as enjoyed by individuals without disabilities. The MNNG will provide qualified employees or applicants with Reasonable Accommodations and Personal Assistance Services in accordance with all applicable Federal regulations. Furthermore, pre-selection is not only counter-productive to effective recruitment and placement but also violates Minnesota National Guard Merit Placement principles and will not be tolerated. If you have questions, please contact the Equal Employment Manager at 651-282-4472.
group id: DOAF