AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC

Duties

Remove inspection plates and other aircraft structural members as well as fuel lines, electrical harness, and probes, controls, etc.

Remove necessary braces, plumbing, valves, and explosion suppressant foam.

Remove plumbing, cell connectors, laces and installation bolts to collapse cell.

Comply with strict fire and safety regulations and utilizes safety practices and procedures and complies with security regulations, directives, and policies.

Ensure that assigned equipment, special precision tools, and materials are handled, stored, and protected correctly.

Requirements

Conditions of employment

• U.S. Citizenship Required
• Males must be registered for Selective Service. See Legal and Regulatory Guide
• Must be able to obtain and maintain a secret security clearance.
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• This position is subject to provisions of the DoD Priority Placement Program
• Position may be subject to random drug testing
• Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
• Disclosure of Political Appointments is required
• Direct Deposit: All federal employees are required to have direct deposit.
• A relocation or recruitment incentive may be authorized for this position, which may require completion of a service agreement.
• 120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
• Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period.
• Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
• May be required to work overtime, rotating shifts, uncommon tours, weekends, etc.
• Preferred AFSC: 2A6X4
• 120-DAY COMPETITIVE CERTIFICATE: This vacancy announcement may be used to fill like vacancies for 120-days from the closing date. Applicants may be referred for consideration as/if additional vacancies occur during this period.
• Must be a current member of the AF Reserve or willing/qualified to join
• Retired military are usually ineligible for membership in the Air Force Reserve. Retired military personnel who have active Air Force Reserve assignments may apply provided they show assignment (position and unit) on their application.

Qualifications

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standard Handbook Federal Wage System (FWS) for the WG-8200 Fluid Systems Maintenance Family.

QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook Federal Wage System (FWS) for the WG-8200 Fluid Systems Maintenance Family . Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.

JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

1. Ability to do the work of an Aircraft Pneudraulic Systems Mechanic, WG-8268-10 without more than normal supervision. (SCREEN-OUT ELEMENT)

2. Knowledge of equipment assembly, installation and repair associated with Aircraft Pneudraulic Systems Mechanic.

3. Knowledge of technical practices (theoretical, precise, artistic) associated with Aircraft Pneudraulic Systems Mechanic.

4. Ability to troubleshoot and perform maintenance, repair, replacement of various light and heavy machinery and vehicles.

5. Ability to read and interpret a variety of technical data associated with Aircraft Pneudraulic Systems Mechanic.

6. Ability to use and maintain tools and equipment associated with Aircraft Pneudraulic Systems Mechanic.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Additional Conditions of Employment :
FUNCTIONAL REQUIREMENTS:
Heavy lifting (45-79 pounds). Moderate lifting (15-44 lbs). Light lifting (under 15 lbs). Moderate carrying (15-44 lbs). Light carrying (under 15 lbs). Hours of straight pulling are 1 hour/week. Hours of pulling hand over hand are 1 hour/week. Hours of pushing are 1 hour/week. Reaching above shoulder. Use of fingers. Both hands required. Hours of walking are 4 hours/week. Hours of standing are 10 hours/week. Hours of crawling are 1 hour/week. Hours of kneeling are 1 hour/week. Hours of repeated bending are 3 hours/week. Climbing, use of legs and arms. Both legs required. Operation of crane, truck, tractor, or motor vehicle. Ability for rapid mental and muscular coordination simultaneously. Near vision correctable at 13 inches to 16 inches to Jaeger 1 to 4. Far vision correctable in one eye to 20/20 and 20/40 in the other. Both eyes required. Depth perception. Ability to distinguish basic colors. Hearing (without aid). Must be free from claustrophobia.

ENVIRONMENTAL FACTORS:
Outside and inside (other than normal commuting). Excessive heat. Excessive cold. Excessive humidity. Excessive dampness or chilling. Dry atmospheric conditions. Excessive noise, intermittent. Dust. Solvents. Solvents (decreasing agents). Grease and oils. Radiant energy. Electrical energy. Slippery or uneven walking surface. Working around machinery with moving parts. Working around moving objects or vehicles. Working on ladders or scaffolding. Vibration. Working closely with others. Working alone.

This is an Air Reserve Technician (ART) position. ARTs are eligible for 15 days active duty tour each year for which military leave is granted with full civilian pay. Air Reserve units and members; are subject to immediate call to active duty in mobilization to meet a national emergency. For additional information regarding ART positions and/or military qualifications, please call 1-800-257-1212. Retired military are usually ineligible for membership in the AF Reserve. Retired military that have active AF Reserve assignments may apply provided they show assignment (position) on the application. A military service member's statement of service/certification will be accepted IF a terminal leave form or DD214 cannot be provided. The statement/certification should indicate member's separation from active duty is within 120 days of the closing date of this announcement. It must be signed by, or by direction of, the adjutant, personnel officer, or commander of your unit or higher headquarters and must indicate when your terminal leave will begin, your rank, dates of active duty service, the type of discharge and character of service (i.e. honorable). Your preference and/or appointment eligibility will be verified prior to appointment. Military members may be appointed before the effective date of their military retirement/separation if member is on terminal leave.

Additional information

ADDITIONAL INFORMATION:
Applications will be accepted from United States citizens (U.S. citizenship required at time of application).

Males born after 12-31-59 must be registered or exempt from Selective Service. For additional information, click .

For information on veteran's preference click .

Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated in the "Highly Qualified" or "Best Qualified" Category on the rating criteria for this vacancy. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.

Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.

Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.

Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.

is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .

If you have questions regarding this announcement and have hearing or speech difficulties click .