Job Requirements
Charleston, SC
Secret Polygraph Unspecified
Career Level not specified
Salary not specified
Join Premium to unlock estimated salaries 
Job Description
Duties
Conditions of employment
In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Technical and Medical Positions
SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-10, or equivalent in other pay systems. Examples of specialized experience includes utilizing a wide range of engineering (civil, mechanical or electrical) rules and operations for projects involving specialized or complicated procedures requiring substantial experience or training in methods and practices of drafting techniques sufficient to produce and/or review engineering drawings and plans involving original, novel and/or complex designs. Knowledge of state and local jurisdictions over the use of land and natural resources, the construction of facilities and utilities, and the distribution of utilities services. Apply the standard practices of related engineering disciplines and architecture as they relate to construction management.
FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-10 level is required to meet the time-in-grade requirements for the GS-11 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. General and practical knowledge of engineering concepts (civil, mechanical or electrical), methods, principles, and practices and familiarity with other engineering disciplines (architecture, structural, utilities etc).
2. Knowledge of engineering and construction standards, means, methods, practices, techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations; and standard contracting regulations, practices, and procedures as they apply to construction management.
3. Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively analyze, identify problems, and create documents and packages sufficient to accomplish assigned functions.
4. Knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders.
5. Ability to plan, conduct, and record site/facility surveys and inspections.
6. Ability to plan and organize work; analyze, interpret, and apply rules, regulations, and procedures in a variety of situations; recommend timely and economical solutions; coordinate with other engineering disciplines and architects; communicate effectively both orally and in writing; and maintain good working relations.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Direct Deposit: All federal employees are required to have direct deposit.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
- Performs cradle-to-grave design and construction project management of multiple assigned projects.
- Maintains surveillance over construction contractors to ensure overall compliance with contracted specifications, schedules, etc.
- Coordinates projects with other project managers, engineers or architects, A/E firms, Joint Base Mission Partners and base agencies.
- Keeps abreast of emerging technologies to ensure programmed development will not prematurely become obsolete.
- In conjunction with the primary duty of design and construction project management, on a less frequent basis performs work in the programming/base development, design, and/or operations and maintenance (O&M) functions.
- Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- Must be able to obtain and maintain a Secret Clearance
- Work may occasionally require travel away from the normal duty station on military and commercial aircraft.
- This position is subject to provisions of the DoD Priority Placement Program
- The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required for the position.
- Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
- May be required to serve on contract source selection boards or act as project liaison with the Army Corps of Engineers or other design agencies as required.
- Disclosure of Political Appointments
- Advance in hire may be authorized if there is demonstrable proof provided on your resume
- Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period.
- Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
- Incumbent is required to file an OGE Form 450, Confidential Financial Disclosure Report, upon appointment and will be required to file annually.
In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Technical and Medical Positions
SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-10, or equivalent in other pay systems. Examples of specialized experience includes utilizing a wide range of engineering (civil, mechanical or electrical) rules and operations for projects involving specialized or complicated procedures requiring substantial experience or training in methods and practices of drafting techniques sufficient to produce and/or review engineering drawings and plans involving original, novel and/or complex designs. Knowledge of state and local jurisdictions over the use of land and natural resources, the construction of facilities and utilities, and the distribution of utilities services. Apply the standard practices of related engineering disciplines and architecture as they relate to construction management.
FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-10 level is required to meet the time-in-grade requirements for the GS-11 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. General and practical knowledge of engineering concepts (civil, mechanical or electrical), methods, principles, and practices and familiarity with other engineering disciplines (architecture, structural, utilities etc).
2. Knowledge of engineering and construction standards, means, methods, practices, techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations; and standard contracting regulations, practices, and procedures as they apply to construction management.
3. Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively analyze, identify problems, and create documents and packages sufficient to accomplish assigned functions.
4. Knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders.
5. Ability to plan, conduct, and record site/facility surveys and inspections.
6. Ability to plan and organize work; analyze, interpret, and apply rules, regulations, and procedures in a variety of situations; recommend timely and economical solutions; coordinate with other engineering disciplines and architects; communicate effectively both orally and in writing; and maintain good working relations.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Direct Deposit: All federal employees are required to have direct deposit.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
group id: DOAF