Job Requirements
OH
Secret Polygraph Unspecified
Career Level not specified
Salary not specified
Join Premium to unlock estimated salaries 
Job Description
Duties
As an ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12, you will perform the following duties:
1. Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Installs serviceable components into aircraft and performs total systems alignment and harmonization in accordance with existing technical orders and directives. Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates complete electronic avionics multi-systems control, Demonstrates a thorough working knowledge of complex aircraft avionics and or ECM systems.
2. Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal.
3. Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off-equipment maintenance on aircraft avionics such as automatic flight control systems, instrument systems, communication and navigation systems, and inertial navigations systems. Coordinates back shop bench check; completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pitot-static testers, programming units and special purpose test analyzers.
4. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Documents all discrepancies and maintenance actions performed by inputting information into the electronic records information systems (i.e.: CAMS, IMDS, GO-81, REMIS). Recommends hardware and software changes. Submits change recommendations to Technical Orders. Requisitions supply assets and processes repairable assets in accordance with Standard Base Supply System requirements. Documents maintenance actions in aircraft forms and documents man-hour expenditures and maintenance actions in the maintenance computer system.
Performs other duties as assigned.
*The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description PD#: (D2325000).
Requirements
Conditions of employment
Ohio Air National Guard Membership is required.
Males born after 31 December 1959 must be registered for Selective Service.
Federal employment suitability as determined by a background investigation.
May be required to successfully complete a trial period.
Participation in direct deposit is mandatory.
MILITARY REQUIREMENTS:
Compatible military grade and assignment required within one year of the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the Ohio Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Ohio Air National Guard recruiter prior to applying for this position.
Military Grades: E1 through E6
Compatible Military Assignments: 2A954; 2A5XX, 2A6XX, 2A7XX, 2A9XX, 2W0XX
Other Requirements:
1. Must be able to obtain and maintain the appropriate security clearance of the position.
2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
4. Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
5. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
Qualifications
GENERAL EXPERIENCE : Experience or training which demonstrates the applicant's knowledge to perform duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes. Ability to collect and analyze data effectively, efficiently, and accurately. Able to apply procedures and directives by reading and interpreting material. Ability to communicate clearly and effectively. Applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.
SPECIALIZED EXPERIENCE : Experience or training demonstrating the ability to repair, align, and adjust major integrated electronic systems such as inertial navigation system, automatic flight control, or fire control system. Extensive knowledge of electronic, pneumatic, hydraulic, and mechanical systems in order to understand and predict the progressive effects of malfunctions throughout the interrelated units, (e.g., trace an apparent operating error in the hydraulic controls of a gun mount back to the failure of a tactical computer to integrate yaw, pitch, azimuth, and velocity inputs) and to predict areas of technical difficulty in order to assist lower grade employees. Through knowledge of the application of electronic theories and practices to one or more complex integrated systems such as fire control, inertial navigation, or automatic landing control systems. Broad knowledge of such applications as radar, digital or analog computers, digital or cathode ray tube display devices, etc., and specific knowledge of the technology and practices which integrate these components into a total functional system. Knowledge of mathematics including algebra and basic trigonometric functions in order to adapt standard formulas to the specific requirements of the integrated system. Ability to follow drawings for integrated electronic systems such as radar navigation systems which integrate terrain information from the radar, pitch, roll, and turn rate, etc. from sensing devices and actuate control relays. Ability to trace the effect of a change in one subsystem to other integrated subsystems and determine which controls and devices must be changed or adjusted to compensate. Ability to diagnose and determine needed repairs for malfunctions in electronics systems such as weapons control where knowledge of the entire system is necessary to interpret error data and trace back through a number of units of the system to locate the deficiency.
Education
Additional information
***If serving under an incentive contract, termination of that incentive(s) will occur effective one day prior to your AGR, Permanent Military Technician, or Indefinite Military Technician start date. Temporary Military Technicians will have their incentive terminated if their tour exceeds 179 days in a continuous 12-month period.***
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
As an ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12, you will perform the following duties:
1. Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Installs serviceable components into aircraft and performs total systems alignment and harmonization in accordance with existing technical orders and directives. Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates complete electronic avionics multi-systems control, Demonstrates a thorough working knowledge of complex aircraft avionics and or ECM systems.
2. Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal.
3. Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off-equipment maintenance on aircraft avionics such as automatic flight control systems, instrument systems, communication and navigation systems, and inertial navigations systems. Coordinates back shop bench check; completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pitot-static testers, programming units and special purpose test analyzers.
4. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Documents all discrepancies and maintenance actions performed by inputting information into the electronic records information systems (i.e.: CAMS, IMDS, GO-81, REMIS). Recommends hardware and software changes. Submits change recommendations to Technical Orders. Requisitions supply assets and processes repairable assets in accordance with Standard Base Supply System requirements. Documents maintenance actions in aircraft forms and documents man-hour expenditures and maintenance actions in the maintenance computer system.
Performs other duties as assigned.
*The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description PD#: (D2325000).
Requirements
Conditions of employment
Ohio Air National Guard Membership is required.
Males born after 31 December 1959 must be registered for Selective Service.
Federal employment suitability as determined by a background investigation.
May be required to successfully complete a trial period.
Participation in direct deposit is mandatory.
MILITARY REQUIREMENTS:
Compatible military grade and assignment required within one year of the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the Ohio Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Ohio Air National Guard recruiter prior to applying for this position.
Military Grades: E1 through E6
Compatible Military Assignments: 2A954; 2A5XX, 2A6XX, 2A7XX, 2A9XX, 2W0XX
Other Requirements:
1. Must be able to obtain and maintain the appropriate security clearance of the position.
2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
4. Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
5. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
Qualifications
GENERAL EXPERIENCE : Experience or training which demonstrates the applicant's knowledge to perform duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes. Ability to collect and analyze data effectively, efficiently, and accurately. Able to apply procedures and directives by reading and interpreting material. Ability to communicate clearly and effectively. Applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.
SPECIALIZED EXPERIENCE : Experience or training demonstrating the ability to repair, align, and adjust major integrated electronic systems such as inertial navigation system, automatic flight control, or fire control system. Extensive knowledge of electronic, pneumatic, hydraulic, and mechanical systems in order to understand and predict the progressive effects of malfunctions throughout the interrelated units, (e.g., trace an apparent operating error in the hydraulic controls of a gun mount back to the failure of a tactical computer to integrate yaw, pitch, azimuth, and velocity inputs) and to predict areas of technical difficulty in order to assist lower grade employees. Through knowledge of the application of electronic theories and practices to one or more complex integrated systems such as fire control, inertial navigation, or automatic landing control systems. Broad knowledge of such applications as radar, digital or analog computers, digital or cathode ray tube display devices, etc., and specific knowledge of the technology and practices which integrate these components into a total functional system. Knowledge of mathematics including algebra and basic trigonometric functions in order to adapt standard formulas to the specific requirements of the integrated system. Ability to follow drawings for integrated electronic systems such as radar navigation systems which integrate terrain information from the radar, pitch, roll, and turn rate, etc. from sensing devices and actuate control relays. Ability to trace the effect of a change in one subsystem to other integrated subsystems and determine which controls and devices must be changed or adjusted to compensate. Ability to diagnose and determine needed repairs for malfunctions in electronics systems such as weapons control where knowledge of the entire system is necessary to interpret error data and trace back through a number of units of the system to locate the deficiency.
Education
Additional information
***If serving under an incentive contract, termination of that incentive(s) will occur effective one day prior to your AGR, Permanent Military Technician, or Indefinite Military Technician start date. Temporary Military Technicians will have their incentive terminated if their tour exceeds 179 days in a continuous 12-month period.***
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
group id: DOAF