Interdisciplinary General Engineer or Architect

Duties

• You will be responsible for the project management features of work related to military construction projects.
• You will be responsible for developing and implementing regional policy on all project management issues.
• You will facilitate information sharing, coordination and distribution of technical data related to project management within the Capital Improvements Business Line.
• You will serve as liaison between project team and Supported Commander.
• You will provide construction support including visits to construction sites to observe construction progress and assist in problem resolution.
• You will provide technical expertise to the project team which includes, Construction Manager, Contract Specialist, Project Technical Team, Design Manager other Business Line representatives, Supported Command reps, and others as appropriate.

Requirements

Conditions of employment

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Functional Area and Tier assigned to the position, along with Continuous Learning (CL) points, are required within established timeframes.
• Registration as Professional Engineer or Registered Architect is required at the GS-13 grade level.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• This position is eligible for ad-hoc/situational telework at the discretion of management.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

GS-12:
Your resume must also demonstrate at least one year of Specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: Responsible for project management for military construction projects and ensuring timely execution of project development, design, and construction.

GS-13:
Your resume must also demonstrate at least one year of Specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: Serving as the technical expert in project management responsible for ensuring the quality and performance of work conducted. In addition, providing consultative services across a wide range of architectural and engineering activities related to facilities construction and addressing complex problem-solving.

Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

CONTINUED FROM EDUCATION:
GS-0801 Basic Education:

Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

Education

GS-0808 Basic Education:

Degree: architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.

OR

Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following:

Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in paragraph A. The curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities. The courses required for a degree in architecture generally place emphasis upon planning, esthetics, and materials and methods of construction, while the courses for an architectural engineering degree place equal or greater weight on the technical engineering aspects such as structural systems, mechanical systems, and the properties of materials. Because of this difference in emphasis, persons with degrees in architecture may have a preference for work assignments that offer greater opportunities for them to express their artistic and creative abilities. As a result, they may be more concerned with planning and design aspects of architecture, and persons with degrees in architectural engineering may be more engaged in aspects emphasizing technical engineering considerations.

Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in paragraph A. The curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities. The courses required for a degree in architecture generally place emphasis upon planning, esthetics, and materials and methods of construction, while the courses for an architectural engineering degree place equal or greater weight on the technical engineering aspects such as structural systems, mechanical systems, and the properties of materials. Because of this difference in emphasis, persons with degrees in architecture may have a preference for work assignments that offer greater opportunities for them to express their artistic and creative abilities. As a result, they may be more concerned with planning and design aspects of architecture, and persons with degrees in architectural engineering may be more engaged in aspects emphasizing technical engineering considerations.

CONTINUED IN QUALIFICATIONS ABOVE:

Additional information

*** Guam is designated as a medically underserved area. Military medical facilities offer space-available primary and limited specialty medical care; however, services are not guaranteed. ****

This position is also subject to a Cost of Living Allowance (COLA) and Non-Foreign Post Differential (NFPD) currently set at 11.88% and 13.12%, respectively. COLA and NFPD are subject to change without notice.

Relocation expenses (i.e. PCS) or relocation incentives as described in 5 USC 5753 may be authorized in accordance with applicable travel regulations.

A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.

Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.

Tour Length: 24 Months

This position is covered by the Department of Defense Priority Placement Program.

Several vacancies may be filled.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: .

Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.