ENGINEER/SCIENTIST

Duties

• You will facilitate the successful integration of Conventional Prompt Strike (CPS) Weapon System (WS) onto the Zumwalt Platform.
• You will ensure technical rigor (both process rigor and technical expertise) is applied across Launchers (SPC31), Weapon Control System (WCS) and Mission Planning (MP) (SPC32), and Platform Integration (SPC33).
• You will ensure requisite system engineering discipline is applied across the portfolio (SEP, SETR process adherence, certification, etc.) and ensure launcher, WCS, and MP design and interfaces meet requirements.
• You will ensure all internal and external interface requirement changes are properly documented and communicated.
• You will document, assess, and approve Zumwalt Platform Integration SW/HW Launcher, WCS, and MP changes.
• You will identify CPS/Zumwalt integration risks and coordinate with Zumwalt (IWS 9, PMS 500) and CPS leadership, program stakeholders, subject matter experts, and technical warrant holders to define mitigation strategies and reduce risk.
• You will provide technical support of key programmatic milestones, such as CPS/Zumwalt program and industry partner design concept reviews, In-Process Reviews, and Weapon Systems Safety Review Board meetings.
• You will brief stakeholders, to include SPC, PMS 500 and IWS 9 leadership, on CPS/Zumwalt integration.

Requirements

Conditions of employment

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final Secret security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Functional Area and Tier assigned to the position, along with Continuous Learning (CL) points, are required within established timeframes.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

This is an interdisciplinary position and may be filled by a General Engineer (0801-series), a General Physical Scientist (1301-series), an Operations Research Analyst (1515-series), a Mathematician (1520-series), or a Computer Scientist (1550-series) depending upon the qualifications of the candidate. Applicants in positions with occupational series other than those listed (0801, 1301, 1515, 1520 and 1550) may apply; however, you must apply directly to the series listed in this vacancy that is most applicable to your qualifications.

In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the ND-4 pay band (GS-12 and GS-13 equivalency) in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: As a professional engineer or scientist applying technical project management principles to lead technical teams in the integration of weapons systems onto US Navy ship platforms.

Additional qualification information can be found from the following Office of Personnel Management website:

Individual Occupational Requirements (IOR):

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet at least one of the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

• Professional Engineering Series (08XX) - Degree: A professional engineering degree from an ABET-accredited college or university; OR a degree with curriculum in differential and integral calculus, with additional courses in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics; or electronics; OR
• Professional Engineering Series (08XX) - Substitution of Education/Experience: A combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering; and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (a) professional registration, (b) evidence of successfully passing the Engineer-in-Training (EIT) examination; (c) successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified above; or (d) successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering provided that it included at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. (Note to Applicants: Please see the Qualifications & Education sections of this announcement for a link to the Office of Personnel Management (OPM) Individual Occupational Requirements. OPM guidance indicates that there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience. This training plan or experience must be well documented and provided at time of application.); OR
• 1301-General Physical Science Series: A degree in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics; or education equivalent to one of the majors shown above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education; OR
• 1515-Operations Research Series: A degree in operations research; or a related degree that included at least 24 semester hours in a combination of operations research, mathematics, probability, statistics, mathematical logic, science, or subject-matter courses. At least 3 of these 24 semester hours must have been in calculus; OR
• 1520-Mathematics Series: A degree in mathematics; or a combination of education and experience - courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics), plus appropriate experience or additional education. The total coursework described above must have included differential and integral calculus and, in addition, four advanced mathematics courses requiring calculus or equivalent mathematics courses as a prerequisite; OR
• 1550-Computer Science Series: A degree in computer science; or a degree with at least 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of these 30 semester hours must have been in a combination of statistics and mathematics that included differential and integral calculus.

Additional information

This position is covered by the Department of Defense Priority Placement Program.

Additional vacancies may be filled by this announcement.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at:

Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations.

Temporary actions taken under this announcement may be made permanent without further competition.

Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date.

In addition to meeting all minimum qualification and eligibility requirements, ICTAP applicants must be well qualified for the position to receive consideration for special priority selection. A well-qualified ICTAP applicant is one who possesses the competencies and experience to perform the duties of the position successfully with orientation to learn/understand the activities, procedures, policies and processes. Demonstrated work experience in the occupation is typically qualifying for placement. This criterion cannot be met by education and training. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate.
For more information about ICTAP eligibility please review the following link:

Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.