Job Requirements
Tobyhanna, PA
Confidential Polygraph Unspecified
Career Level not specified
Salary not specified
Join Premium to unlock estimated salaries 
Job Description
Duties
Requirements
Conditions of employment
Who May Apply: US Citizens
In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is .
In addition to meeting the Basic requirement listed in the Education section; to qualify for this position you must also meet the qualification requirements listed below:
GS-05- Applicants who meet the basic education requirement for this position are considered eligible for GS-05 grade level. (Note you must attach a copy of your transcripts).
GS-07: One year of specialized experience which includes: 1) Supporting higher level chemical engineers in executing the design and development of chemical engineering projects: AND 2) Assisting in identifying chemical engineering problems and recommend corrective action; AND 3) Carrying out engineering assignments adhering to timelines. This definition of specialized experience is typical for work performed at the next lower grade/level position in the federal service to the (GS-05). (Note: You must attach a copy of your transcripts)
OR
Education: One full academic year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as Electronics Engineering. (Note: You must attach a copy of your transcripts)
OR
Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on: (1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR(2) Grade-Point Average - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies ( ). (Note: You must attach a copy of your transcripts.)
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.
GS-09 One year of specialized experience which includes::1) Providing technical inputwhen working with team members; AND 2) Providing creative solutions based on supervisor guidelines: AND 3) Conducting analytical investigations using the scientific method. This definition of specialized experience is typical for work performed at the next lower grade/level position in the federal service to the (GS-07). (Note: You must attach a copy of your transcripts).
OR
Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering or Computer Science. (Note: You must attach a copy of your transcripts.)
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages. (Note: You must attach a copy of your transcripts.)
GS-11One year of specialized experience which includes:1) Preparing procedures for shop personnel on production or maintenance processes that utilize chemicals ; e.g., electroplating, chemical etching and milling, cleaning processes.; AND 2) Preparing sketches, flow process charts, bills of material, or work orders for assigned projects: AND 3) Conducting technical and economic feasibility studies of newly developed chemical processes and products to determine applicability of new technology to production needs. This definition of specialized experience is typical for work performed at the next lower grade/level position in the federal service to the (GS-09). (Note: You must attach a copy of your transcripts).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study].
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages
Applicants must meet basic eligibility requirements such as minimum qualifications, and other regulatory requirements by the closing date of the announcement.
Your resume must be two pages or less and must support the specialized experience described in this announcement. Resumes exceeding two pages will be removed from consideration.
Education
Basic Educational Requirement to be considered for this Chemical Engineer position. (Transcripts required),
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1 Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3.Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit:
Additional information
- Prepare procedures for shop personnel on production or maintenance processes that utilize chemicals; e.g., electroplating, chemical etching and milling, cleaning processes,
- Conduct technical and economic feasibility studies of newly developed chemical processes and products to determine applicability of new technology to production needs
- Prepare sketches, flow process charts, bills of material, and work orders for assigned projects.
- Develop specifications for additions or improvements to production directorates' chemical/refinishing facilities.
- Prepare Environmental Impact Assessment (EIA) statements and assist in the preparation of applications for state Environmental permits
- Serve as Contracting Officers Technical Representative (COTR).
- Provide technical direction and guidance to shop supervisor and employees.
Requirements
Conditions of employment
- Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
- Direct Deposit Required.
- Up to 25 percent business travel (TDY) may be required.
- Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 11.
- This is an Army Acquisition, Logistics and Technology Workforce position (Foundational ). Selectee must meet position requirements for Engineering and Technical Management certification within 36 months as of entrance on duty.
- Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
Who May Apply: US Citizens
In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is .
In addition to meeting the Basic requirement listed in the Education section; to qualify for this position you must also meet the qualification requirements listed below:
GS-05- Applicants who meet the basic education requirement for this position are considered eligible for GS-05 grade level. (Note you must attach a copy of your transcripts).
GS-07: One year of specialized experience which includes: 1) Supporting higher level chemical engineers in executing the design and development of chemical engineering projects: AND 2) Assisting in identifying chemical engineering problems and recommend corrective action; AND 3) Carrying out engineering assignments adhering to timelines. This definition of specialized experience is typical for work performed at the next lower grade/level position in the federal service to the (GS-05). (Note: You must attach a copy of your transcripts)
OR
Education: One full academic year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as Electronics Engineering. (Note: You must attach a copy of your transcripts)
OR
Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on: (1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR(2) Grade-Point Average - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies ( ). (Note: You must attach a copy of your transcripts.)
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.
GS-09 One year of specialized experience which includes::1) Providing technical inputwhen working with team members; AND 2) Providing creative solutions based on supervisor guidelines: AND 3) Conducting analytical investigations using the scientific method. This definition of specialized experience is typical for work performed at the next lower grade/level position in the federal service to the (GS-07). (Note: You must attach a copy of your transcripts).
OR
Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering or Computer Science. (Note: You must attach a copy of your transcripts.)
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages. (Note: You must attach a copy of your transcripts.)
GS-11One year of specialized experience which includes:1) Preparing procedures for shop personnel on production or maintenance processes that utilize chemicals ; e.g., electroplating, chemical etching and milling, cleaning processes.; AND 2) Preparing sketches, flow process charts, bills of material, or work orders for assigned projects: AND 3) Conducting technical and economic feasibility studies of newly developed chemical processes and products to determine applicability of new technology to production needs. This definition of specialized experience is typical for work performed at the next lower grade/level position in the federal service to the (GS-09). (Note: You must attach a copy of your transcripts).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study].
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages
Applicants must meet basic eligibility requirements such as minimum qualifications, and other regulatory requirements by the closing date of the announcement.
Your resume must be two pages or less and must support the specialized experience described in this announcement. Resumes exceeding two pages will be removed from consideration.
Education
Basic Educational Requirement to be considered for this Chemical Engineer position. (Transcripts required),
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1 Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3.Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit:
Additional information
- Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
- You will be required to provide proof of U.S. Citizenship.
- This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
- Direct Deposit of Pay is required.
- Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
- If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the information sheet.
- This is a(n) Engineers and Scientists Career Field (16) position.
- Multiple positions may be filled from this announcement.
- Salary includes applicable locality pay or Local Market Supplement.
- Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
group id: DODAF