TITLE 32 AIRCRAFT ENGINE MECHANIC WG-8602-10

Position Description # D1636000

This position is located in an Air National Guard Aviation Wing, Maintenance Group, Maintenance Squadron, Propulsion Element, (Jet Engine Intermediated Maintenance (JEIM) and the Hush House). The primary purpose of this position is to maintain, troubleshoot, remove, repair, install, certify, test and perform operational checks on the turboprop engines, propellers, and associated propulsion system components.

MAJOR DUTIES:

(1) Removes, installs, certifies, repairs, modifies, overhauls, and installs turboprop engines, reduction gear boxes, turbine modules, compressor modules, auxiliary power units, propellers and related propeller components as required. Performs maintenance on all propulsion systems including troubleshooting and diagnosing defects, certifying, conducting bench checks, performing in-shop and on-equipment repairs and overhauls. Diagnoses malfunctions using computerized test equipment, schematic diagrams, technical publications and performs the appropriate repair according to the test results and analysis. Determines the extent of disassembly necessary to repair, overhaul, replace and certify all engine, propeller and auxiliary power unit parts. Cleans and inspects engine and propeller component parts such as turbines, gearboxes, blades, gears, bearings, etc.

(2) Modifies engines, propellers, auxiliary power units, and components in accordance with Time Compliance Technical Orders (TCTO) directives; removes and installs engine quick change kits; prepares engines for installation and installs engine and propeller assemblies on aircraft. Evaluates technical problems of repair, overhaul, modification and installation of aircraft propulsion systems. Solves all types of maintenance problems and performs bench checks and test engine and propeller assemblies for serviceability.

(3) Performs operational checks of installed propellers, engines, auxiliary power units and sub-systems during aircraft maintenance ground runs in accordance with approved checklists. Employs test equipment such as computer borescope, fuel pressure gauges, air pressure gauges, and alignment fixtures. Utilizes special tools and precision measuring equipment, high-pressure hydraulic test equipment, and electronic test equipment.

(4) Performs isochronal and special evaluations on engines, propellers and auxiliary power units. Interprets certification findings and determines adequacy of corrective action. Certifies installed and repaired engines for compliance with technical publications. Performs fixed and mobile test stand functions (which may include maintenance of engine test cell facility); installs special test equipment; performs pre-operational and post operational checks. Operates engines and propellers and records test data. Operates, certifies, and maintains computerized engine test/trim automated systems (ETTAS) on the engine test cell. Evaluates, identifies and corrects problems on propeller and engine components causing vibration or impending failure using the ETTAS system, and vibration analyzer.

(5) Performs aircraft full power runs and complete engine and propeller efficiency checks. Clears Red X symbol documentation on engine and propeller related components.

(6) Prepares man-hour data collection and required forms for input into the Core Automated Maintenance System (CAMS) or the G081 (AFI 22-2101, CAMS for Mobility). Reviews and assists in maintaining Technical Orders (TOs) and other technical publications and directives pertinent to the element.

(7) Maintains bench stock, parts, and equipment. Assists the material control function in identifying part numbers and stock numbers for processing and controlling of repair cycle assets.

(8) Provides on-the-job training for assigned personnel. Plans and conducts formal classes of instruction in techniques of repair and maintenance of aircraft engine, propeller, auxiliary power unit, and related equipment and in the use of diagrams, blueprints, wiring schematics and technical publications. Evaluates effectiveness of training by observation and through written and oral examinations. Advises supervisor of the experience and skill levels of assigned personnel. Maintains training documentation.

(9) Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections, Inspector General and Unit Evaluation Inspections, mobility, and command support readiness inspections, mobility, and command support exercises. Perform such additional duties as structural fire fighting, aircraft fire/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, and/or serves as a member of a team to cope with natural disasters or civil emergencies.

(10) Performs other duties as assigned.

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in military assignment in WV's National Guard, and is required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Male applicants born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered, or you are not eligible for appointment in this agency.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a 2 year probationary period.
• Participation in direct deposit is mandatory.
• U.S. Citizenship is required.
• Required to obtain and maintain a satisfactory security clearance, AND, as a minimum, a completed National Agency Check (NAC) prior to assignment.
• The agency will provide additional information regarding what information or documentation will be needed and how you can request of the agency a legally required exception from this requirement.

MINIMUM MILITARY GRADE: E2 MAXIMUM MILITARY GRADE : E6

Your rank MUST be included somewhere within your resume.

You must fully substantiate in your own words that you meet the requirements listed below. When explaining minimum requirements and specialized experience you must give examples. Do not copy from the vacancy announcement or the position description. Explain it in your own words and give examples to be considered for this vacancy.

All personnel applying for this position who do not meet the minimum military grade requirement MUST provide the proper signed memorandum from your respective Military Personnel Office (MILPO for ARNG, FSS for ANG) to prove eligibility to obtain the required grade upon accepting the position.

***ENLISTED APPLICANTS ONLY***
All enlisted applicants who exceed the maximum military rank must provide a memorandum explaining if selected for this position, you will accept a voluntary reduction in rank. The memorandum must be submitted WITH your application to be considered for this position.

GENERAL EXPERIENCE: Experience or training that has provided the ability to perform assembly and disassembly operations and make prescribed modifications to aircraft engines, engine assemblies, and accessories in accordance with technical specifications, procedures, and requirements. Experience using hand and power tools common to the trade.

SPECIALIZED EXPERIENCE: Experience or training performing standard, routine assembly and disassembly operations and making prescribed modifications to aircraft engines, engine assemblies, and accessories. Experience or training performing maintenance overhaul, troubleshooting, testing, and repair of aircraft engines, engine components, and powertrains for fixed and/or rotary wing aircraft. Experience determining maintenance needed from work orders, inspection reports, historical records, and diagnosis.



There are no educational requirements for this position.



DEFINITION FOR AREAS OF CONSIDERATION
Area 1: Current On-board Title 32 Technicians (Tenure: 1-Permanent, 2-Conditional, 3-Indefinite) and Permanent AGRs in the West Virginia National Guard at the advertised location.
Area 2: Current On-board Title 32 Technicians (Tenure: 1-Permanent, 2-Conditional, 3-Indefinite) and Permanent AGRs in the West Virginia National Guard.
Area 3: WVNG Army M-Day and Air Force DSG (Drill-Status Guardsmen,) Temporary Title 32 Technicians, Temporary AGR (OTOT), and national guardsmen serving on Full-time National Guard Duty - Operational Support Orders (ADOS).
Area 4: Federal re-employable eligible employees, National Guardsmen outside of the WVNG, and U.S Citizens willing to join the West Virginia National Guard as a condition of employment.

Permanent Change of Station: PCS funds are not available for this position.

Incentives: Relocation and Recruitment Incentives may be authorized for this position.

All WVNG positions are pending availability of resources and funds.