Job Requirements
Beale AFB, CA
Secret Polygraph Unspecified
Career Level not specified
Salary not specified
Join Premium to unlock estimated salaries
Job Description
Duties
- Inspects, tests, troubleshoots, maintains, disassembles, repairs, installs, modifies, stores, issues, fits, integrates, and adjusts aircrew flight equipment such as full pressure suit and full pressure suit equipment, helmets, survival kits, single place life rafts, parachutes, controller, regulators, emergency signaling and communication devices such as survival radios and beacons, and other types of aircrew survival systems.
- Makes, modifies, and repairs articles that are difficult to plan, lay out, construct, and fit because of figure irregularities, uncommon shapes and sizes, unusual designs, or intricately constructed parts, such as protective suits and similar items.
- Performs documentation and Quality Control Inspections (QCI) tasks. Updates inspection information in a variety of automated data management systems.
- Effectively train personnel IAW operational procedures on full pressure suit integration, aircrew launch and recovery; inspection and repair procedures of special purpose test equipment, full pressure suit assemblies, survival kits, oxygen equipment, and other related equipment as needed.
- Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work area.
Requirements
Conditions of employment
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-4800 General Equipment Maintenance Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is ability to do the work of a WG-4818 AIRCRAFT SURVIVAL AND FLIGHT EQUIPMENT REPAIRER & INSTR MECH without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of aircrew flight equipment inspections and maintenance, use, care and fitting procedures of aircrew flight equipment; and related supply procedures; and aircrew flight equipment continuation training classes.
2. Knowledge of pyrotechnic and explosive devices, ability to work safely and competently around aircraft egress systems.
3. Knowledge of installation, handling and storage, effects of temperature, humidity and direct sun light for aircraft parachute and survival kits, Full Pressure Suit Ensembles and components.
4. Knowledge of Physiological effects of altitude on the human body, gases and liquids, e.g. Oxygen, Nitrogen and Liquid Oxygen; shop mathematics, e.g., fractions, equations, and plain measurements, tools and tool control procedures.
5. Knowledge of safety requirements, practices, and procedures including the proper handling, use, and disposal of hazardous waste, materials, pyrotechnics and Liquid oxygen as outlined in applicable standards, manuals, and directives.
6. Ability to demonstrate and explain proper usage and operation of aircrew flight and survival equipment; make field level machine and hand sewing repairs; fit items to spaces with unusual parameters or obstructions; input and extract data from a database using a keyboard (a qualified typist is not required); set up, operate, and perform minor maintenance of equipment used in performing duties.
Physical Effort:
Requires prolonged standing, sitting, stooping, bending, pulling, lifting, and working in cramped, strained and uncomfortable positions performing inspections and maintenance on AFE equipment. Requires considerable use of arms, hands, and fingers to use power tools and inspect a variety of AFE equipment. Frequently lifts and carries items that weigh 30 to 50 pounds independently and occasionally lifts heavier items up to 150 pounds with assistance. Will be required to work in hot, cold, and inclement environments.
Working Conditions:
The majority of the work will be performed in a temperature controlled environment; however some tasks will require work on the flight line in hot, cold, and inclement weather. Subject to high noise levels while working on or around aircraft Possibility of bruises, punctures, scratches, and other injuries caused by handling sharp tools and materials treated with special finishes. They may work on ladders and scaffolds. Some danger involved in handling munitions and high pressure oxygen cylinders, Liquid Oxygen and working in and around ejection seat aircraft. May be exposed to ionizing radiation if broken compasses are mishandled. Workers are exposed to caustic fumes from adhesives and may be exposed to body fluids while cleaning oxygen equipment. The supervisor will provide personal protective equipment.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
- Inspects, tests, troubleshoots, maintains, disassembles, repairs, installs, modifies, stores, issues, fits, integrates, and adjusts aircrew flight equipment such as full pressure suit and full pressure suit equipment, helmets, survival kits, single place life rafts, parachutes, controller, regulators, emergency signaling and communication devices such as survival radios and beacons, and other types of aircrew survival systems.
- Makes, modifies, and repairs articles that are difficult to plan, lay out, construct, and fit because of figure irregularities, uncommon shapes and sizes, unusual designs, or intricately constructed parts, such as protective suits and similar items.
- Performs documentation and Quality Control Inspections (QCI) tasks. Updates inspection information in a variety of automated data management systems.
- Effectively train personnel IAW operational procedures on full pressure suit integration, aircrew launch and recovery; inspection and repair procedures of special purpose test equipment, full pressure suit assemblies, survival kits, oxygen equipment, and other related equipment as needed.
- Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work area.
Requirements
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- This posn is subject to provisions of the DoD Priority Placement Program
- Disclosure of Political Appointments
- May be required to work other than normal duty hours and tours of duties such as rotating shifts, overtime, weekends, call back, uncommon tours of duty, holidays, etc
- Work may occasionally require travel away from the normal duty station on military or commercial aircraft
- The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required
- This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing
- Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety
- The physical requirements of this position as determined by the manager are:
- Requires prolonged standing, sitting, stooping, bending, pulling, lifting, and working in cramped, strained and uncomfortable positions performing inspections and maintenance on AFE equipment
- Requires considerable use of arms, hands, and fingers to use power tools and inspect a variety of AFE equipment.
- Frequently lifts and carries items that weigh 30 to 50 pounds independently and occasionally lifts heavier items up to 150 pounds with assistance. Will be required to work in hot, cold, and inclement environments
- Due to the nature of this position and the limited amount of experienced personnel in this field it is highly desirable that the nominee have a minimum of four years of experience
- and in-depth knowledge on all current U-2 physiological equipment and launch/recovery operations. Training may be provided to individuals that have never been previously qualified in these duties
- Direct Deposit: All federal employees are required to have direct deposit.
- Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period.
- Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
- Must have the ability to obtain and maintain a Secret security clearance
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-4800 General Equipment Maintenance Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is ability to do the work of a WG-4818 AIRCRAFT SURVIVAL AND FLIGHT EQUIPMENT REPAIRER & INSTR MECH without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of aircrew flight equipment inspections and maintenance, use, care and fitting procedures of aircrew flight equipment; and related supply procedures; and aircrew flight equipment continuation training classes.
2. Knowledge of pyrotechnic and explosive devices, ability to work safely and competently around aircraft egress systems.
3. Knowledge of installation, handling and storage, effects of temperature, humidity and direct sun light for aircraft parachute and survival kits, Full Pressure Suit Ensembles and components.
4. Knowledge of Physiological effects of altitude on the human body, gases and liquids, e.g. Oxygen, Nitrogen and Liquid Oxygen; shop mathematics, e.g., fractions, equations, and plain measurements, tools and tool control procedures.
5. Knowledge of safety requirements, practices, and procedures including the proper handling, use, and disposal of hazardous waste, materials, pyrotechnics and Liquid oxygen as outlined in applicable standards, manuals, and directives.
6. Ability to demonstrate and explain proper usage and operation of aircrew flight and survival equipment; make field level machine and hand sewing repairs; fit items to spaces with unusual parameters or obstructions; input and extract data from a database using a keyboard (a qualified typist is not required); set up, operate, and perform minor maintenance of equipment used in performing duties.
Physical Effort:
Requires prolonged standing, sitting, stooping, bending, pulling, lifting, and working in cramped, strained and uncomfortable positions performing inspections and maintenance on AFE equipment. Requires considerable use of arms, hands, and fingers to use power tools and inspect a variety of AFE equipment. Frequently lifts and carries items that weigh 30 to 50 pounds independently and occasionally lifts heavier items up to 150 pounds with assistance. Will be required to work in hot, cold, and inclement environments.
Working Conditions:
The majority of the work will be performed in a temperature controlled environment; however some tasks will require work on the flight line in hot, cold, and inclement weather. Subject to high noise levels while working on or around aircraft Possibility of bruises, punctures, scratches, and other injuries caused by handling sharp tools and materials treated with special finishes. They may work on ladders and scaffolds. Some danger involved in handling munitions and high pressure oxygen cylinders, Liquid Oxygen and working in and around ejection seat aircraft. May be exposed to ionizing radiation if broken compasses are mishandled. Workers are exposed to caustic fumes from adhesives and may be exposed to body fluids while cleaning oxygen equipment. The supervisor will provide personal protective equipment.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
group id: DOAF