Job Requirements
naval surface warfare center, MD
Secret Polygraph Unspecified
Career Level not specified
Salary not specified
Join Premium to unlock estimated salaries 
Job Description
Duties
Requirements
Conditions of employment
This is an interdisciplinary position and may be filled by a General Engineer (0801-series), a Mechanical Engineer (0830-series), or a Naval Architect (0871-series) depending upon the qualifications of the candidate. Applicants in positions with occupational series other than those listed (0801, 0830, and 0871) may apply; however, you must apply directly to the series listed in this vacancy that is most applicable to your qualifications.
To Qualify for ND-04 Position : Your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-03 (GS-09 through 11 equivalency) pay band in the Federal service or equivalent experience in the private or public sector as a professional engineer: applying fundamental engineering principles to design, develop, and evaluate technical projects or systems; support technical research and analysis to solve intricate engineering problems or conflicts; and coordinating engineering projects and presenting findings to various stakeholders.
To Qualify for ND-03 Position : Your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-02 (GS-05 through 08 equivalency) pay band in the Federal service or equivalent experience in the private or public sector as a professional engineer: supporting technical research and analysis, assisting in solving complex engineering problems, and supporting development of technical deliverables.
Additional qualification information can be found from the following Office of Personnel Management website:
AND
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess:
Professional Engineering 08XX Series :
A professional engineering degree from an ABET-accredited college or university; OR a degree with curriculum in differential and integral calculus, with additional courses in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics; or electronics; OR A combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering; and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (a) professional registration, (b) evidence of successfully passing the Engineer-in-Training (EIT) examination; (c) successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified above; or (d) successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering provided that it included at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. (Note to Applicants: Please see the Qualifications & Education sections of this announcement for a link to the Office of Personnel Management (OPM) Individual Occupational Requirements. OPM guidance indicates that there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience. This training plan or experience must be well documented and provided at time of application.)
In lieu of specialized experience, you may qualify with the following education or combination of both education and experience:
The following education may be used to substitute specialized experience to qualify for the ND-3 :
Successful completion of a 5 year program of study of at least 160 semester hours leading to a bachelor's degree in engineering and have one year of appropriate professional experience that required and was characterized by 1) professional knowledge of engineering, 2) professional ability to apply such knowledge to engineering problems, and 3) positive and continuing development of professional knowledge and ability.
OR
Successful completion of a bachelor's degree with superior academic achievement and have one year of professional engineering experience that required and was characterized by 1) professional knowledge of engineering, 2) professional ability to apply such knowledge to engineering problems, and 3) positive and continuing development of professional knowledge and ability.
OR
Successful completion of a master's or equivalent graduate degree.
OR
Successful completion of two full years of progressively higher graduate level education leading to a master's degree.
OR
A combination of experience and graduate education as described above that equates to one year of experience. My percentage of the required education plus my percentage of the required experience equal one hundred percent.
A transcript must be submitted with your application if qualifying using education. See Required Documents for additional information.
Additional information
This position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at:
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application:?1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link:
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
Vacancies filled from this announcement may be filled at any grade level listed.
If selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of management. Promotion is neither implied nor guaranteed.
- You will be responsible for all aspects of submarine hydrodynamic model testing of new design, construction, and modified submarines.
- You will serve in a role critical to the execution of the NAVSEA approved Hydro Characterization Process for submarines.
- You will support and/or lead the overall planning and preparation for model experiments, instrumentation development for experiments, research and development, and data analysis and reporting.
- You will support and execute the conduct of Hydrodynamic, Ship Control, and special maneuvering model testing and evaluation on all classes of submarines/ships in the US Navy.
- You will develop and maintain submarine hydrodynamic performance model testing competencies for design, fabrication, data acquisition, data analysis, testing methodology, and instrumentation.
- You will require the ability to communicate orally and in writing, including technical writing, as well as oral and written presentations.
- You will require advanced knowledge of mechanical systems, engineering principles, and experimental measurement techniques.
Requirements
Conditions of employment
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to successfully complete a pre-appointment physical examination.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- MSP/PPP applicants must currently hold the required security clearance.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- You will be required to perform occasional sea duty.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
This is an interdisciplinary position and may be filled by a General Engineer (0801-series), a Mechanical Engineer (0830-series), or a Naval Architect (0871-series) depending upon the qualifications of the candidate. Applicants in positions with occupational series other than those listed (0801, 0830, and 0871) may apply; however, you must apply directly to the series listed in this vacancy that is most applicable to your qualifications.
To Qualify for ND-04 Position : Your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-03 (GS-09 through 11 equivalency) pay band in the Federal service or equivalent experience in the private or public sector as a professional engineer: applying fundamental engineering principles to design, develop, and evaluate technical projects or systems; support technical research and analysis to solve intricate engineering problems or conflicts; and coordinating engineering projects and presenting findings to various stakeholders.
To Qualify for ND-03 Position : Your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-02 (GS-05 through 08 equivalency) pay band in the Federal service or equivalent experience in the private or public sector as a professional engineer: supporting technical research and analysis, assisting in solving complex engineering problems, and supporting development of technical deliverables.
Additional qualification information can be found from the following Office of Personnel Management website:
AND
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess:
Professional Engineering 08XX Series :
A professional engineering degree from an ABET-accredited college or university; OR a degree with curriculum in differential and integral calculus, with additional courses in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics; or electronics; OR A combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering; and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (a) professional registration, (b) evidence of successfully passing the Engineer-in-Training (EIT) examination; (c) successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified above; or (d) successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering provided that it included at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. (Note to Applicants: Please see the Qualifications & Education sections of this announcement for a link to the Office of Personnel Management (OPM) Individual Occupational Requirements. OPM guidance indicates that there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience. This training plan or experience must be well documented and provided at time of application.)
In lieu of specialized experience, you may qualify with the following education or combination of both education and experience:
The following education may be used to substitute specialized experience to qualify for the ND-3 :
Successful completion of a 5 year program of study of at least 160 semester hours leading to a bachelor's degree in engineering and have one year of appropriate professional experience that required and was characterized by 1) professional knowledge of engineering, 2) professional ability to apply such knowledge to engineering problems, and 3) positive and continuing development of professional knowledge and ability.
OR
Successful completion of a bachelor's degree with superior academic achievement and have one year of professional engineering experience that required and was characterized by 1) professional knowledge of engineering, 2) professional ability to apply such knowledge to engineering problems, and 3) positive and continuing development of professional knowledge and ability.
OR
Successful completion of a master's or equivalent graduate degree.
OR
Successful completion of two full years of progressively higher graduate level education leading to a master's degree.
OR
A combination of experience and graduate education as described above that equates to one year of experience. My percentage of the required education plus my percentage of the required experience equal one hundred percent.
A transcript must be submitted with your application if qualifying using education. See Required Documents for additional information.
Additional information
This position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at:
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application:?1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link:
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
Vacancies filled from this announcement may be filled at any grade level listed.
If selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of management. Promotion is neither implied nor guaranteed.
group id: DODAF