Job Requirements
TX
Secret Polygraph Unspecified
Career Level not specified
Salary not specified
Join Premium to unlock estimated salaries 
Job Description
Duties
As a QUALITY ASSURANCE SPECIALIST (Title 32) with the Texas National Guard, your duties will include, but will not be limited to:
Conditions of employment
Areas of Consideration: In-State Excepted. This includes:
Incentives: Acceptance of a military Federal technician position may result in termination and / or repayment of military incentives. Please check your contract and contact your servicing Education Services (Incentives) office or the Recruiting/Retention office.
Remarks:
Military Requirements:
For Dual-Status Technician positions service affiliation under Title 32 USC 709 is required.
Military skill set is determined by AFSC/MOS requirements. Upon selection, individuals must be assigned to a compatible military AFSC/MOS in accordance with statutes and National Guard Bureau regulations and must obtain/maintain all requirements of the AFSC/MOS.
Rank Spread: E-6/TSgt not to exceed E-7/MSgt
Compatible MOS/Branch/AFSC: 2A5XX, 2A6XX, 2R2XX, 2W1XX, 2W0XX,2A9XX
Other Requirements:
For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed.
For positions requiring a security clearance (Secret or Top Secret) the applicant must possess or be able to obtain a clearance within one year of appointment.
Qualifications
In describing your experience in your resume, please be clear and specific. Assumptions regarding your experience will not be made.
To be considered for qualification, your resume must include relevant experience with beginning and ending dates of employment/experience reflecting the following:
Specialized Experience Required
At least 1-year specialized experience to at least the next lower grade (GS-09) with comprehensive knowledge of assigned aircraft and complex aircraft systems to include but not limited to electronic equipment and systems, manual and automatic flight controls, airframe, landing gear, pneudraulics, jet engine propulsion and associated systems, Aerospace Ground Equipment, Support equipment, and related test equipment. Knowledge of munitions storage methods, procedures, and techniques to determine storage location based on condition code, compatibility, and security requirements. Knowledge of the techniques, documentation, and equipment used in the examination, classification, and maintenance of munitions assets and their components. Comprehensive and thorough knowledge of the entire maintenance quality assurance program to include the full range of principles, concepts and methodology and the establishment of procedures for monitoring the quality of products in a maintenance environment. Broad knowledge of the practices, policies and procedures of related functional and administrative activities such as Technical Order Distribution Office (TODO), logistics maintenance support functions, contract administration and coordination of CLS or CFT, engineering disposition requests, maintenance production, procurement, supply support, munitions storage etc. and skill in effecting appropriate interface/coordination of quality assurance plans and programs and evaluations with these activities. Broad knowledge of the TCTO and QDR process and the interface/coordination with depot engineering and supply process. Thorough knowledge of the Maintenance Standardization Evaluation Program (MSEP). Broad knowledge of end items, systems, including quality characteristics and working knowledge of manufacturing methods, special processes and the interrelationship of various parts. Working knowledge of systems, subsystems and end item components and the functional relationships among components and subsystems, and test and measurement techniques. Broad knowledge of Higher Headquarters regulations and instructions, PDM work specifications, local directives including Quality Plans, Technical Orders, Military Specifications, and International Commercial Practices such as ISO 9000. Comprehensive knowledge of inspection and evaluation techniques, statistical methods, mathematics, production management, industrial management, and database management skills to perform root cause, deficiency, and trend analysis. Analyses are used to validate and update Acceptable Quality Levels (AQLs), frequency changes to Routine Inspection Lists (RILs), and recommendations for corrective maintenance practice action. Broad knowledge of the body of laws, regulations, policies and procedures relating to aircraft maintenance, ground, explosive & flight safety, occupational health and environmental compliance. Ability to use this knowledge to develop an evaluation plan and prevention effort to minimize risk and prevent damage to equipment, structures, weapons systems, or injury to personnel. Skill in applying this knowledge to the identification of quality problems and resolving the difficult and complex work assignments. Skill to plan and conduct studies, analyze performance and quality data and to develop sound recommendations for correction of quality system deficiencies. Ability to conduct technical reviews, analyze findings and develop recommendations for corrections or improvements in the quality assurance program. Ability to prepare technical reports on quality levels, to identify specific problem areas and to recommend corrective action. Ability to communicate effectively through written and oral presentations. Skill and ability to work effectively in stressful situations and maintain effective interpersonal relationships at all levels within the organization. Ability to plan and successfully complete individual projects and/or larger projects. Skill in using various computer and software applications to include but not limited to: word processing programs, spreadsheets, email services, databases and database management.
-OR-
A Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree or LL.M., if related. If you are using education to qualify for this position, you must provide transcripts to support your educational claims.
-OR-
A combination of successfully completed post-high school education and experience that may be used to meet total qualification requirements. Only graduate education in excess of the amount required for the next lower grade level may be used to qualify applicants for positions at grades GS-9 and GS-11. If you are using education to qualify for this position, you must provide transcripts to support your educational claims.
Only experience/education gained by closing date of this position will be considered.
Education
If you are using education to qualify for this position, you must provide transcripts to support your educational claims.
Undergraduate and Graduate Education: Major study -- quality assurance, statistics, mathematics, production management, industrial management, computer science, engineering, engineering technology, physical sciences, textiles, or other fields related to the position.
A Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree or LL.M., if related.
Additional information
Trial Period:
As a condition of employment, you will be required to serve a 1- 2 trial period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider:
- your performance and conduct;
- the needs and interests of the agency;
- whether your continued employment would advance organizational goals of the agency or the Government; and
- whether your continued employment would advance the efficiency of the Federal service.
Upon completion of your trial period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
As a QUALITY ASSURANCE SPECIALIST (Title 32) with the Texas National Guard, your duties will include, but will not be limited to:
- Serves as the Office of Primary Responsibility (OPR) for wing maintenance policy, advising supervisors and employees on both general policy and specific maintenance matters. Makes decisions and recommendations on technical concerns presented by supervisors. Utilizes a comprehensive knowledge and ability to interpret Air Force Instructions, Technical Orders, engineering drawings, product specifications, Air Force Occupational and Health (AFOSH) and environmental standards, public law, and locally developed policy. Evaluates and assesses complex systems, subsystems, integrated systems/subsystems, or components for conformance to applicable technical data, engineering drawings, standards and specifications.
- Maintenance Standardization Evaluation Program (MSEP): Administers, evaluates, and coordinates a comprehensive quality assurance, maintenance standardization, and inspection program for all areas of the maintenance organization, all maintenance disciplines, job series and Air Force Specialty Codes (AFSCs).
- Executes the evaluation program and accumulates data using Inspection and Evaluation techniques such as Task Evaluations, Quality Verification Inspections, Special Inspections, Personnel Evaluations and Management Inspections. Evaluates the quality of in-process and after-the-fact maintenance and ensures prescribed technical and management procedures are followed.
- Monitors and assesses the organization's quality program and elements of the program to gauge compliance with directives and established processes. Identifies deficiencies, implements corrective measures, and improves processes to enhance mission effectiveness and efficiency.
- Utilizes data collection techniques and procedures for evaluation, inspection, and audit programs, evaluates the results and determines the appropriate and effective method and format for presentation to higher-level management. Performs statistical analysis (e.g. normal distribution, averages, means, standard deviations, trending, root cause analysis, etc.) using standard statistical quality control methods.
- Collaborates with the Maintenance Group Commander, Maintenance Squadron Commanders, and Quality Assurance Supervisor to plan, develop, implement, inspect, and report numerous critical compliance issues and review the Configuration Management (CM) programs.
- Serves as the Aircraft Weight and Balance program manager utilizing complex computer based programs, data bases, electronic weighing apparatus, and integrated weight and balance computers for the Wing to maintain strict accounting of aircraft weight and balance for safe flight operations.
- Reviews wing depot-level assistance requests developed in accordance with tech orders. Reviews for adequacy and submits engineering disposition requests to the System Program Office (SPO). Serves as the unit point of contact regarding all engineering disposition requests.
- Prepares and reviews Product Quality Deficiency Reports (QDR) prior to releasing to the Air Logistics Center (ALC) or Aircraft Sustainment Group and performs exhibit-processing oversight by coordinating with ALC and Logistics Readiness Squadron to ensure proper exhibit control and handling.
- Serves as the authority for determining applicability of Time Compliance Technical Orders (TCTO) and One Time Inspections (OTI). Reviews and determines the applicability, completeness, accuracy and of TCTOs and OTIs to unit maintained equipment, notifies the Maintenance Operations Center (MOC), and monitors expended man-hours and the quality of unit compliance actions.
- Manages the Technical Order Improvement Program and Suggestion Program for the wing.
- Executes a Quality Assurance Surveillance Plan (QASP) to monitor Contractor Logistic Support (CLS) aircraft or Contract Field Team (CFT). Serves as the government's on-site Quality Assurance Representative (QAR) and is the liaison between contractor and government personnel.
- Maintains direct contact with the NGB staff and with counterparts at other ANG bases in order to resolve problems affecting maintenance capabilities and compliance.
- Manages and conducts quality verification inspections and surveillance inspections of conventional weapons systems and components.
- Performs other duties as assigned.
Conditions of employment
Areas of Consideration: In-State Excepted. This includes:
- All currently employed full-time permanent, indefinite and temporary personnel of the Texas National Guard.
- All current members of the Texas National Guard.
Incentives: Acceptance of a military Federal technician position may result in termination and / or repayment of military incentives. Please check your contract and contact your servicing Education Services (Incentives) office or the Recruiting/Retention office.
Remarks:
- The Texas National Guard is an Equal Opportunity employer.
- Veterans' preference is not applicable to this position.
- Direct deposit is mandatory.
- This is a Non-Bargaining Unit position.
- Texas Air National Guard Membership is required.
- Trial period required (see additional information)
Military Requirements:
For Dual-Status Technician positions service affiliation under Title 32 USC 709 is required.
Military skill set is determined by AFSC/MOS requirements. Upon selection, individuals must be assigned to a compatible military AFSC/MOS in accordance with statutes and National Guard Bureau regulations and must obtain/maintain all requirements of the AFSC/MOS.
Rank Spread: E-6/TSgt not to exceed E-7/MSgt
Compatible MOS/Branch/AFSC: 2A5XX, 2A6XX, 2R2XX, 2W1XX, 2W0XX,2A9XX
Other Requirements:
For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed.
For positions requiring a security clearance (Secret or Top Secret) the applicant must possess or be able to obtain a clearance within one year of appointment.
Qualifications
In describing your experience in your resume, please be clear and specific. Assumptions regarding your experience will not be made.
To be considered for qualification, your resume must include relevant experience with beginning and ending dates of employment/experience reflecting the following:
Specialized Experience Required
At least 1-year specialized experience to at least the next lower grade (GS-09) with comprehensive knowledge of assigned aircraft and complex aircraft systems to include but not limited to electronic equipment and systems, manual and automatic flight controls, airframe, landing gear, pneudraulics, jet engine propulsion and associated systems, Aerospace Ground Equipment, Support equipment, and related test equipment. Knowledge of munitions storage methods, procedures, and techniques to determine storage location based on condition code, compatibility, and security requirements. Knowledge of the techniques, documentation, and equipment used in the examination, classification, and maintenance of munitions assets and their components. Comprehensive and thorough knowledge of the entire maintenance quality assurance program to include the full range of principles, concepts and methodology and the establishment of procedures for monitoring the quality of products in a maintenance environment. Broad knowledge of the practices, policies and procedures of related functional and administrative activities such as Technical Order Distribution Office (TODO), logistics maintenance support functions, contract administration and coordination of CLS or CFT, engineering disposition requests, maintenance production, procurement, supply support, munitions storage etc. and skill in effecting appropriate interface/coordination of quality assurance plans and programs and evaluations with these activities. Broad knowledge of the TCTO and QDR process and the interface/coordination with depot engineering and supply process. Thorough knowledge of the Maintenance Standardization Evaluation Program (MSEP). Broad knowledge of end items, systems, including quality characteristics and working knowledge of manufacturing methods, special processes and the interrelationship of various parts. Working knowledge of systems, subsystems and end item components and the functional relationships among components and subsystems, and test and measurement techniques. Broad knowledge of Higher Headquarters regulations and instructions, PDM work specifications, local directives including Quality Plans, Technical Orders, Military Specifications, and International Commercial Practices such as ISO 9000. Comprehensive knowledge of inspection and evaluation techniques, statistical methods, mathematics, production management, industrial management, and database management skills to perform root cause, deficiency, and trend analysis. Analyses are used to validate and update Acceptable Quality Levels (AQLs), frequency changes to Routine Inspection Lists (RILs), and recommendations for corrective maintenance practice action. Broad knowledge of the body of laws, regulations, policies and procedures relating to aircraft maintenance, ground, explosive & flight safety, occupational health and environmental compliance. Ability to use this knowledge to develop an evaluation plan and prevention effort to minimize risk and prevent damage to equipment, structures, weapons systems, or injury to personnel. Skill in applying this knowledge to the identification of quality problems and resolving the difficult and complex work assignments. Skill to plan and conduct studies, analyze performance and quality data and to develop sound recommendations for correction of quality system deficiencies. Ability to conduct technical reviews, analyze findings and develop recommendations for corrections or improvements in the quality assurance program. Ability to prepare technical reports on quality levels, to identify specific problem areas and to recommend corrective action. Ability to communicate effectively through written and oral presentations. Skill and ability to work effectively in stressful situations and maintain effective interpersonal relationships at all levels within the organization. Ability to plan and successfully complete individual projects and/or larger projects. Skill in using various computer and software applications to include but not limited to: word processing programs, spreadsheets, email services, databases and database management.
-OR-
A Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree or LL.M., if related. If you are using education to qualify for this position, you must provide transcripts to support your educational claims.
-OR-
A combination of successfully completed post-high school education and experience that may be used to meet total qualification requirements. Only graduate education in excess of the amount required for the next lower grade level may be used to qualify applicants for positions at grades GS-9 and GS-11. If you are using education to qualify for this position, you must provide transcripts to support your educational claims.
Only experience/education gained by closing date of this position will be considered.
Education
If you are using education to qualify for this position, you must provide transcripts to support your educational claims.
Undergraduate and Graduate Education: Major study -- quality assurance, statistics, mathematics, production management, industrial management, computer science, engineering, engineering technology, physical sciences, textiles, or other fields related to the position.
A Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree or LL.M., if related.
Additional information
Trial Period:
As a condition of employment, you will be required to serve a 1- 2 trial period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider:
- your performance and conduct;
- the needs and interests of the agency;
- whether your continued employment would advance organizational goals of the agency or the Government; and
- whether your continued employment would advance the efficiency of the Federal service.
Upon completion of your trial period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
group id: DOAF