Job Requirements
Sunnyvale, CA
Top Secret Polygraph Unspecified
Career Level not specified
Salary not specified
Join Premium to unlock estimated salaries 
Job Description
Job Number 726810BR
Description:IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, VAFB or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position.
This occupation requires the installation, maintenance, repair, overhaul and modification
of plant air conditioning, ventilation, and refrigeration systems, and equipment, including
low temperature cascade systems, Building Automation Systems (BAS) and steam
boiler, gas-fired heating equipment (excludes installation of ducts and utility feed lines).
Operate centrifugal chillers, cooling towers, hot water and steam boilers and air handling
systems per manufacturers' recommendations and management directives. Determine,
by making periodic inspections, the repair and maintenance work necessary to prevent
functional breakdowns requiring major overhaul of air conditioning, ventilation and
refrigeration systems and equipment, including low temperature cascade systems, and
gas-fired heating equipment. Make working sketch of parts by taking measurements
directly from equipment in need of repair, record material requirements and specify any
necessary machining operations for use by others.
Overhaul air conditioning, ventilation and refrigeration systems and equipment, including
low temperature cascade systems, by repairing or replacing crank shafts, bearings,
pistons, valves, piston rings, condensers, coils, thermostats, humidity, and other
mechanical units. Charge system with refrigerant, check and test for leaks; set and
adjust controls and regulators and make functional tests after major overhaul operations.
Repair associated hydronic, hot water/chilled water systems, vacuum and pneumatic
control equipment. Fabricate copper tubing, hoses and fittings as required.
Overhaul heating equipment by disassembling heater, diagnosing trouble, replacing or
repairing worn and faulty parts such as burners, baffles, pilots, governors, floats,
strainers, pumps and thermocouples. Reassemble, install and functionally test heating
equipment. Calibrate and make any adjustment required.
Use the BAS computers to monitor and control individual building heating, ventilating and
air conditioning (HVAC) equipment for purposes of monitoring equipment and building
conditions, fault detection, change temperature control points and HVAC systems
analysis/performance.
Troubleshoot and analyze input and output of HVAC stages for HVAC systems by reading
voltages, hand held microprocessors and other observations. Adjust circuit boards and
modules as needed. Work on all 24 volt or less AC/DC HVAC control systems and make
necessary repairs.
Check and calibrate systems after their original installation or after any major overhaul
operation and make necessary adjustments to achieve operational efficiency.
Work at various heights. Assist maintenance craftworkers in other fields of specialization
when so assigned.
Perform modification and rework wherein the operations are essentially the same as the
work described herein.
Work from blueprints, sketches, manufacturers' specifications and manuals.
Work with liaison personnel and may verbally suggest design changes for engineering
approval when the system cannot be installed as designed, or does not meet functional
demands or where such changes will simplify fabrication, installation or maintenance of
the system.
Use any equipment, tools, materials or information source necessary to perform the
above duties.
Basic Qualifications:
Complete knowledge of maintenance shop practice and procedure as related to the
installation, operation, maintenance, repair, overhaul and modification of systems and
equipment described herein. Functional knowledge of gases and liquids under pressure,
HVAC (BAS) energy management systems and personal computer operation. Must
possess Universal Refrigeration Reclaim license.
Ability to read and interpret manufacturer's drawings and specifications, installation
layouts and sketches; to use machinist's hand tools and precision measuring
instruments; to work to exacting tolerances.
Must possess a valid State of California Class C Driver's License, if required. Must
possess, or obtain within 90 days, all LMMS-issued safety licenses required by law to
operate material handling equipment and vehicles normally used by employees in this
classification.
Must be able to obtain and maintain a TS/SCI clearance.
Desired Skills:
Experience with BAS systems
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Top Secret with Investigation or CV date within 5 years
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Standard Monday to Friday 40 hour work week
.
The base range for this position in California is $30.93 - $58.42.
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. The wage range and benefits summary is a general guideline and is governed by the applicable collective bargaining agreement when extending an offer.
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs , and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: SPACE
Relocation Available: No
Career Area: Technicians
Type: Full-Time
Shift: First
Description:IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, VAFB or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position.
This occupation requires the installation, maintenance, repair, overhaul and modification
of plant air conditioning, ventilation, and refrigeration systems, and equipment, including
low temperature cascade systems, Building Automation Systems (BAS) and steam
boiler, gas-fired heating equipment (excludes installation of ducts and utility feed lines).
Operate centrifugal chillers, cooling towers, hot water and steam boilers and air handling
systems per manufacturers' recommendations and management directives. Determine,
by making periodic inspections, the repair and maintenance work necessary to prevent
functional breakdowns requiring major overhaul of air conditioning, ventilation and
refrigeration systems and equipment, including low temperature cascade systems, and
gas-fired heating equipment. Make working sketch of parts by taking measurements
directly from equipment in need of repair, record material requirements and specify any
necessary machining operations for use by others.
Overhaul air conditioning, ventilation and refrigeration systems and equipment, including
low temperature cascade systems, by repairing or replacing crank shafts, bearings,
pistons, valves, piston rings, condensers, coils, thermostats, humidity, and other
mechanical units. Charge system with refrigerant, check and test for leaks; set and
adjust controls and regulators and make functional tests after major overhaul operations.
Repair associated hydronic, hot water/chilled water systems, vacuum and pneumatic
control equipment. Fabricate copper tubing, hoses and fittings as required.
Overhaul heating equipment by disassembling heater, diagnosing trouble, replacing or
repairing worn and faulty parts such as burners, baffles, pilots, governors, floats,
strainers, pumps and thermocouples. Reassemble, install and functionally test heating
equipment. Calibrate and make any adjustment required.
Use the BAS computers to monitor and control individual building heating, ventilating and
air conditioning (HVAC) equipment for purposes of monitoring equipment and building
conditions, fault detection, change temperature control points and HVAC systems
analysis/performance.
Troubleshoot and analyze input and output of HVAC stages for HVAC systems by reading
voltages, hand held microprocessors and other observations. Adjust circuit boards and
modules as needed. Work on all 24 volt or less AC/DC HVAC control systems and make
necessary repairs.
Check and calibrate systems after their original installation or after any major overhaul
operation and make necessary adjustments to achieve operational efficiency.
Work at various heights. Assist maintenance craftworkers in other fields of specialization
when so assigned.
Perform modification and rework wherein the operations are essentially the same as the
work described herein.
Work from blueprints, sketches, manufacturers' specifications and manuals.
Work with liaison personnel and may verbally suggest design changes for engineering
approval when the system cannot be installed as designed, or does not meet functional
demands or where such changes will simplify fabrication, installation or maintenance of
the system.
Use any equipment, tools, materials or information source necessary to perform the
above duties.
Basic Qualifications:
Complete knowledge of maintenance shop practice and procedure as related to the
installation, operation, maintenance, repair, overhaul and modification of systems and
equipment described herein. Functional knowledge of gases and liquids under pressure,
HVAC (BAS) energy management systems and personal computer operation. Must
possess Universal Refrigeration Reclaim license.
Ability to read and interpret manufacturer's drawings and specifications, installation
layouts and sketches; to use machinist's hand tools and precision measuring
instruments; to work to exacting tolerances.
Must possess a valid State of California Class C Driver's License, if required. Must
possess, or obtain within 90 days, all LMMS-issued safety licenses required by law to
operate material handling equipment and vehicles normally used by employees in this
classification.
Must be able to obtain and maintain a TS/SCI clearance.
Desired Skills:
Experience with BAS systems
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Top Secret with Investigation or CV date within 5 years
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Standard Monday to Friday 40 hour work week
.
The base range for this position in California is $30.93 - $58.42.
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. The wage range and benefits summary is a general guideline and is governed by the applicable collective bargaining agreement when extending an offer.
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs , and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: SPACE
Relocation Available: No
Career Area: Technicians
Type: Full-Time
Shift: First
group id: lckmtncx
We Are Lockheed Martin.
