FLIGHT ENGINEER (INSTRUCTOR)

Duties
Help

The primary purpose of this position is: as an Air Reserve Technician (ART), to perform aircrew duties as an instructor flight engineer in the C-5 aircraft; to administer, schedule and conduct flight and ground training for flight engineers; and to perform staff support duties.

Duties:
1. Develops and provides technical flight engineer upgrade and proficiency training and instruction to Reserve aircrew members and ART personnel.

2. Performs flight engineering duties. Performs preflight inspection of the interior and exterior of the aircraft, to include engines, fuselage, and control surfaces for mechanical and structural soundness; inspects and regulates environmental, hydraulic, fuel, electrical, pressurization, radar, and other
systems as required by the applicable flight manual.

3. Serves as a flight examiner as required and performs staff duties. Administers no-notice and annual evaluations to evaluate aircrew members' performance during all phases of mission execution. Conducts performance critiques.

Requirements
Help
Conditions of employment

• Recruitment Incentive may be authorized for this position
• Incentive for prior work experience considered
• U.S. Citizenship is required
• Must be a current member of the AF Reserve or willing/qualified to join
• Must be able to obtain and retain a Top-Secret Security clearance
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• Males must be registered for Selective Service, see www.sss.gov
• Total salary varies depending on location of position
• This posn is subject to provisions of the DoD Priority Placement Program
• This is a testing designated position (TDP). The employee is subject to random drug testing
• Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
• Shift work and emergency overtime may be required
• Employee must maintain current certifications
• Disclosure of Political Appointments
• Must maintain instructor qualification and demonstrate the highest degree of technical competency in the theory of flight, aerodynamics, and aircraft systems operation.
• Superior qualifications will be considered
• Periodically, as prescribed by regulations, must take and pass written and in-flight standardization/evaluation examinations to include random no-notice evaluations
• Relocation Incentive may be authorized for this position
• AFSC: 1A192A

Qualifications

Qualifications: Applicants will be rated in accordance with the FPM 930-71 Recruitment of Air Reserve Technicians through Competitive Examination (ART Agreement)-SUPPLEMENTAL QUALIFICATION POLICY, DATED 6-OCT-2017. No specific length of experience is required. The qualifications of Flight Engineer (Instructor) in the Air Force are directly related to the completion of prerequisite training rather than years of experience. Applicants for all positions must have logged the minimum number of hours indicated below in the performance of Flight Engineer (Instructor) duties.

Must have been awarded or qualify for a CEA AFSC and hold a valid aviation service aeronautical order. Must be currently qualified as Instructor in MDS and have a minimum of 500 Total Military Flight Time. (MUST PROVIDE FLIGHT LOG, FLYING HISTORY OR ATAFORS FORM WITH APPLICATION).

Must have been qualified as A C-5 Flight Engineer (Instructor) within 8 YEARS of the date of application. Applicants for instructor or examiner positions must be within the past 8 YEARS instructor or examiner qualified in the specific type of aircraft.

NOTE: Candidates establishing eligibility based on military flight experience must provide official orders, forms, or logbooks showing their status as a rated military pilot, flight instructor, or flight examiner as appropriate. Other certificates that meet or exceed the requirement of the Commercial Pilot Certificate are also acceptable, e.g., an Airline Transport Pilot Certificate.

FEDERALTIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-09 level is required to meet the time-in-grade requirements for the GS-10 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements.

KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

1. Knowledge of operating principles and characteristics of major aircraft systems (i.e., fuel, electrical, hydraulics, fire suppression, environmental, pressurization, engine) and the function of applicable controls, panels, and indicators; and skill in analyzing operating conditions, diagnosing problems, determining alternate procedures and or initiating corrective actions.

2. Knowledge of the interrelationships among aircraft systems and the impact of change in performance of one on others and skill to analyze overall aircraft condition in terms of flight safety.

3. Knowledge of aircraft performance parameters and limitations in relation flight procedures during takeoff, climb, cruise, descent, and landing and skill to take and interpret instrument readings, make control adjustments, manage fuel flow, and update performance data.

4. Knowledge of the methods of instruction, aircrew training program requirements, procedures, and standards of performance; and skill to apply this knowledge in planning, developing, and executing unit training/evaluation programs.

5. Knowledge of aircraft maintenance procedures and skill in diagnosing problems and accurately reporting detailed symptoms and conditions.

6. Ability to communicate orally and in writing to prepare lessons, documents, and reports, present training/instruction, and brief passengers and crews.

OTHER SIGNIFICANT FACTS:
1. This is an Air Reserve Technician (ART) position. The incumbent is required to meet and maintain Air Force Reserve requirements. Work schedule will be aligned to allow incumbent to fully participate in unit training assemblies. The incumbent's regular assignments are ART duties; however, the incumbent may be assigned some non-ART duties, generally not to exceed 30 percent of total responsibilities.
2. May be required to travel in military and commercial aircraft to perform temporary duty assignments.
3. Must maintain instructor qualification and demonstrate the highest degree of technical competency in the theory of flight, aerodynamics, and aircraft systems operation. Must remain proficient in the principles of instruction and demonstrate good judgment, patience, tact, and a desire to instruct.
4. Must attain and maintain mission-ready status at the appropriate crew qualification level in the unit's assigned aircraft. Periodically, as prescribed by regulations, must take and pass written and inflight standardization/evaluation examinations to include random no-notice evaluations. May be
required to maintain flight examiner qualification.
5. Required to maintain proficiency in the use of firearms. As prescribed by regulation, may be required to carry and use a concealed weapon while performing aircrew-related duties.
6. Exposed to the hazards associated with aircraft flight including but not limited to: gravity forces up to one and one-half., working in strained or cramped position as well as exposure to inclement weather during ground operations and frequent climbing, frequent kneeling, and bending. Additionally, exposed to extreme hazards induced from operating aircraft in an actual or simulated tactical environment, which may include, but not limited to, combat aircrew training sorties, aggressive maneuvers, low level flights, formation flights, aerial refueling, airdrops, maximum effort takeoffs, maximum effort landings, and unpressurized operations at high altitude or other related scenarios.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

This is an Air Reserve Technician (ART) position. ARTs are eligible for 15 days active duty tour each year for which military leave is granted with full civilian pay. Air Reserve units and members; are subject to immediate call to active duty in mobilization to meet a national emergency. For additional information regarding ART positions and/or military qualifications, please call 1-800-257-1212. Retired military are usually ineligible for membership in the AF Reserve. Retired military that have active AF Reserve assignments may apply provided they show assignment (position) on the application. A military service member's statement of service/certification will be accepted IF a terminal leave form or DD214 cannot be provided. The statement/certification should indicate member's separation from active duty is within 120 days of the closing date of this announcement. It must be signed by, or by direction of, the adjutant, personnel officer, or commander of your unit or higher headquarters and must indicate when your terminal leave will begin, your rank, dates of active duty service, the type of discharge and character of service (i.e. honorable). Your preference and/or appointment eligibility will be verified prior to appointment. Military members may be appointed before the effective date of their military retirement/separation if member is on terminal leave.

Education

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Additional information

Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.

Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.

120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.

Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.

Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.

Direct Deposit: All federal employees are required to have direct deposit.

Incentives: Recruitment and/or retention incentives may or may not be used.

If you have questions regarding this announcement and have hearing or speech difficulties click here .

Tax Law Impact for PCS: On 22-Dec-2017, Public Law 115-97 - the "Tax Cuts and Jobs Act of 2017" suspended qualified moving expense deductions along with the exclusion for employer reimbursements and payments of moving expenses effective 01-Jan-2018 for tax years 2018 through 2025. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit GSA Bulletin FTR 20-04 here for additional information.