Job Requirements
Oxnard, CA
Secret Polygraph Unspecified
Career Level not specified
Salary not specified
Join Premium to unlock estimated salaries 
Job Description
PDS Defense, Inc. is seeking a Mechanical Technician 2, in Oxnard, CA. Job ID#216509
Pay Rate: $30 - $35/hr
Job Description:
Seeking a Manufacturing Technician 2 to support the Mission Enabling Products (MEP) Business Unit. An organization within the Payload and Ground Systems (PGS) division, MEP is a leading designer, producer, and supplier of spacecraft components that power and enable satellites of all classes. Products include spacecraft panels, bus structures, precision optical structures, deployable structural systems and mechanisms, solar arrays, and antenna reflectors.
This position will serve on-site at our Oxnard, CA location. This position is for 1st Shift. (6:00 am - 3:30 pm)
Responsibilities:
• Performs a variety of duties relating to the fabrication or assembly of mechanical components for larger assemblies.
• Sets up and tests complete prototype units and subassemblies under operational conditions. Analyzes data and recommends modifications to components or test procedure to meet desired specifications.
• Performs functions associated with all manufacturing operations, including working with engineers in set-up and calibration tasks, as well as performing rework and quality testing related to the production of parts, components, sub-assemblies, and final assemblies.
• Uses sophisticated programs to collect and evaluate operating data to conduct on-line adjustments to products, instruments, or equipment.
• Assists in developing methods and procedures to control or modify the manufacturing process.
• Handling and managing fragile composite materials.
• Notate usage, traceability, pot life, and out time controls on all adhesive materials used.
• Bond, prep and bonding of composite structures to metallic fittings.
• Utilize measurement tools such as calipers, rulers, and tape measures for fabricating hardware.
• Report data and interface with other employees and departments.
• Reading and understanding manufacturing/ engineering drawings and shop planning.
• Assist in maintaining overall shop appearance and cleanliness.
Basic Qualifications for Manufacturing Technician 2:
• Must be a US Citizen
• High school diploma or GED and at least 2 years of additional education and/or related experience
• Ability to read, write and work to instructions written in English.
• Ability to lift/push/pull up to 40 pounds
• Ability to be on feet for up to various hours each day
• Ability to work flexible hours, overtime, and different shifts based on demanding manufacturing schedules
• Initiative, self-starter, adaptable, and high motivation for excellence
• Ability to navigate and operate within a Microsoft Office Environment (Word, PowerPoint and Excel)
• Demonstrated Mechanical Ability
• Ability to read and follow directions on engineering drawings and/or schematics
• Familiarity with the proper hand tool technique and safety (wrenches, screwdrivers, etc
• Familiarity with the concept of Torque
Preferred Qualifications for Manufacturing Technician 2:
• Experience working in a composites/manufacturing environment (space/satellite structures, aerospace manufacturing environment)
• Initiative, self-starter, adaptable, and high motivation for excellence.
• Able to read, write and work to written instructions, blueprints, or shop drawings in English.
• Proficient use of basic shop arithmetic.
• Ability to multitask, prioritize.
• Experience or familiarity with ISO requirements, standards, and compliance issues.
• Experience with cranes and rigging, forklifts, and similar manufacturing equipment.
• Proficient use of electronic test equipment such as DC power supplies, Digital Multimeters, and Source Meters.
Benefits offered to vary by the contract. Depending on your temporary assignment, benefits may include direct deposit, free career counseling services, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonus, affordable medical coverage plan, and DailyPay (in some locations). For a full description of benefits available to you, be sure to talk with your recruiter.
Military connected talent encouraged to apply.
VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / Equal Opportunity Employer / Veterans / Disabled
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit http://www.tadpgs.com/candidate-privacy/ or https://pdsdefense.com/candidate-privacy/
The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
Pay Rate: $30 - $35/hr
Job Description:
Seeking a Manufacturing Technician 2 to support the Mission Enabling Products (MEP) Business Unit. An organization within the Payload and Ground Systems (PGS) division, MEP is a leading designer, producer, and supplier of spacecraft components that power and enable satellites of all classes. Products include spacecraft panels, bus structures, precision optical structures, deployable structural systems and mechanisms, solar arrays, and antenna reflectors.
This position will serve on-site at our Oxnard, CA location. This position is for 1st Shift. (6:00 am - 3:30 pm)
Responsibilities:
• Performs a variety of duties relating to the fabrication or assembly of mechanical components for larger assemblies.
• Sets up and tests complete prototype units and subassemblies under operational conditions. Analyzes data and recommends modifications to components or test procedure to meet desired specifications.
• Performs functions associated with all manufacturing operations, including working with engineers in set-up and calibration tasks, as well as performing rework and quality testing related to the production of parts, components, sub-assemblies, and final assemblies.
• Uses sophisticated programs to collect and evaluate operating data to conduct on-line adjustments to products, instruments, or equipment.
• Assists in developing methods and procedures to control or modify the manufacturing process.
• Handling and managing fragile composite materials.
• Notate usage, traceability, pot life, and out time controls on all adhesive materials used.
• Bond, prep and bonding of composite structures to metallic fittings.
• Utilize measurement tools such as calipers, rulers, and tape measures for fabricating hardware.
• Report data and interface with other employees and departments.
• Reading and understanding manufacturing/ engineering drawings and shop planning.
• Assist in maintaining overall shop appearance and cleanliness.
Basic Qualifications for Manufacturing Technician 2:
• Must be a US Citizen
• High school diploma or GED and at least 2 years of additional education and/or related experience
• Ability to read, write and work to instructions written in English.
• Ability to lift/push/pull up to 40 pounds
• Ability to be on feet for up to various hours each day
• Ability to work flexible hours, overtime, and different shifts based on demanding manufacturing schedules
• Initiative, self-starter, adaptable, and high motivation for excellence
• Ability to navigate and operate within a Microsoft Office Environment (Word, PowerPoint and Excel)
• Demonstrated Mechanical Ability
• Ability to read and follow directions on engineering drawings and/or schematics
• Familiarity with the proper hand tool technique and safety (wrenches, screwdrivers, etc
• Familiarity with the concept of Torque
Preferred Qualifications for Manufacturing Technician 2:
• Experience working in a composites/manufacturing environment (space/satellite structures, aerospace manufacturing environment)
• Initiative, self-starter, adaptable, and high motivation for excellence.
• Able to read, write and work to written instructions, blueprints, or shop drawings in English.
• Proficient use of basic shop arithmetic.
• Ability to multitask, prioritize.
• Experience or familiarity with ISO requirements, standards, and compliance issues.
• Experience with cranes and rigging, forklifts, and similar manufacturing equipment.
• Proficient use of electronic test equipment such as DC power supplies, Digital Multimeters, and Source Meters.
Benefits offered to vary by the contract. Depending on your temporary assignment, benefits may include direct deposit, free career counseling services, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonus, affordable medical coverage plan, and DailyPay (in some locations). For a full description of benefits available to you, be sure to talk with your recruiter.
Military connected talent encouraged to apply.
VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / Equal Opportunity Employer / Veterans / Disabled
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit http://www.tadpgs.com/candidate-privacy/ or https://pdsdefense.com/candidate-privacy/
The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
- The California Fair Chance Act
- Los Angeles City Fair Chance Ordinance
- Los Angeles County Fair Chance Ordinance for Employers
- San Francisco Fair Chance Ordinance
group id: 9117PDSD