Posted today
Secret
Unspecified
Unspecified
Engineering - Systems
kingsley, OR (On-Site/Office)
Duties
As a INTERDISCIPLINARY GENERAL ENGINEERING, GS-0801-12, this position is located in a Civil Engineering Squadron at an Air National Guard Wing.
1. Plans and schedules work in a manner that promotes a smooth flow and even distribution. Coordinates plans and schedules with other organization managers and customers as appropriate. Identifies need for changes in priorities and takes action to implement such changes. Balances workload and provides advice, guidance, and direction on a wide range of policy, investigative, inspection/ exercise, strategic planning, and administrative issues. Identifies requirements and initiates requests for additional resources including personnel, overtime, equipment, supplies, training and space to ensure success in meeting goals and objectives. Provides advice to supervisor on significant issues and problems related to work accomplishment.
2. Accomplishes long and short-range planning for replacement of facilities or equipment including contingency operations for potential war or domestic emergency conditions. Contributes to development and time phasing of operations and maintenance of real property facility and construction programs to ensure assimilation into the overall installation program.
3. Represents the Base Architect/Engineer at meetings and conferences. Coordinates on plans, exchanges information, recommends policy or procedures and keeps apprised of new architecture and engineering developments. Makes decisions in line with prior ANG Base policy and planning, such as priority of new construction, acceptance of completed work, facility disposal, real estate acquisition, utilization, or disposal actions. Coordinates with ANG Civil Engineer Directorate and Engineering Divisions, selected civilian engineer and/or the Navy Facilities Engineering/Corps of Engineers (COE) offices on higher echelon-approved projects under the Military Construction Program and Real Property Maintenance Programs and requirements pertinent thereto.
4. Provides technical instructions and information on architectural, engineering and other technical requirements and assigns phases of projects to subordinate architects, engineers, engineering technicians, and draftsmen. Reviews work accomplishment during progress and, upon completion directs changes to achieve technically accurate and adequate layout and design computations, specifications, and estimates. Directs and reviews establishment and maintenance of record drawings and related files. Establishes technical engineering and architectural processes, criteria, and functions. Prepares or directs the preparation of engineering and architectural drawings, specifications and independent cost estimates for the construction, modification and maintenance of a wide variety of military buildings, structures, pavements, grounds, and utilities systems. Reviews architectural drawings, sketches, and specifications for technical adequacy, constructability, maintainability, and operability. Participates as technical consultant and government engineering/architectural representative in conferences with Architectural-Engineering firms to insure that completed designs meet Air Force requirements in terms of technical sufficiency.
5. Develops and maintains effective engineering staff relationships with base and tenant organizations. In staff meetings and in daily activities, presents briefings on acquisitions, construction, operation, maintenance, and financial management concerning real property facilities.
6. Performs other duties as assigned.
*The above description only mentions a limited amount of the position's official duties. For a full comprehensive document that covers all the duties of the position, please contact one of the Recruitment Specialists at the bottom of the announcement.
Requirements
Conditions of employment
AREAS OF CONSIDERATION:
Area 1: All on board permanent and indefinite T5 federal employees within the Oregon National Guard
Area 2: All on board permanent and indefinite T32 federal technicians within the Oregon National Guard
Area 3: All current non-permanent technicians/employees (T5 and T32) of the Oregon National Guard
Area 4: All current and former members of the Oregon National Guard (former members must provide documentation showing membership in the Oregon National Guard such as an NGB 22 or DD214)
Area 5: U.S. citizens
GENERAL AND SPECIALIZED EXPERIENCE REQUIREMENTS:
Work involves managing, supervising, leading, and/or performing professional engineering and scientific work. This position requires knowledge and skills in two or more professional engineering series within the Engineering and Architecture Group, 0800.
GS-12 and above - Must have 1-year equivalent to at least next lower grade level experience, education, or training in preparing technical and engineering drawings. Experience searching out and developing new or greatly modified methods and approaches to accomplish the Civil Engineering function. Experience in coordinating and negotiating with contractors and other personnel regarding engineering and administrative matters. Experience supervising and leading others within the Engineering Occupational Series.
Education
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
If you are using education to qualify for this position, you must provide transcripts or other documentation to support your Educational claims.
Additional information
Veterans Preference Applicants: Veterans' preference will be validated by reviewing submitted documentation. Acceptable documentation may be:
1. A copy of your DD-214, "Certificate of Release or Discharge from Active Duty," which shows dates of service and discharge under
honorable conditions.
2. A "certification" that is a written document from the armed forces that certifies the service member is expected to be discharged or released from active duty service in the armed forces under honorable conditions not later than 120 days after the date the certification is signed.
3. You may obtain a letter from the Department of Veterans Affairs reflecting your level of disability for preference eligibility by visiting a VA Regional Office, contacting a VA call center or online.
4. If claiming 10 point preference, you will need to submit a Standard Form, SF-15, "Application for 10-point Veterans' Preference."
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
The following applies to Bargaining Unit Positions:
Bargaining unit positions within the Oregon National Guard are represented by AFGE, local 2986 (AFL-CIO).
As a INTERDISCIPLINARY GENERAL ENGINEERING, GS-0801-12, this position is located in a Civil Engineering Squadron at an Air National Guard Wing.
1. Plans and schedules work in a manner that promotes a smooth flow and even distribution. Coordinates plans and schedules with other organization managers and customers as appropriate. Identifies need for changes in priorities and takes action to implement such changes. Balances workload and provides advice, guidance, and direction on a wide range of policy, investigative, inspection/ exercise, strategic planning, and administrative issues. Identifies requirements and initiates requests for additional resources including personnel, overtime, equipment, supplies, training and space to ensure success in meeting goals and objectives. Provides advice to supervisor on significant issues and problems related to work accomplishment.
2. Accomplishes long and short-range planning for replacement of facilities or equipment including contingency operations for potential war or domestic emergency conditions. Contributes to development and time phasing of operations and maintenance of real property facility and construction programs to ensure assimilation into the overall installation program.
3. Represents the Base Architect/Engineer at meetings and conferences. Coordinates on plans, exchanges information, recommends policy or procedures and keeps apprised of new architecture and engineering developments. Makes decisions in line with prior ANG Base policy and planning, such as priority of new construction, acceptance of completed work, facility disposal, real estate acquisition, utilization, or disposal actions. Coordinates with ANG Civil Engineer Directorate and Engineering Divisions, selected civilian engineer and/or the Navy Facilities Engineering/Corps of Engineers (COE) offices on higher echelon-approved projects under the Military Construction Program and Real Property Maintenance Programs and requirements pertinent thereto.
4. Provides technical instructions and information on architectural, engineering and other technical requirements and assigns phases of projects to subordinate architects, engineers, engineering technicians, and draftsmen. Reviews work accomplishment during progress and, upon completion directs changes to achieve technically accurate and adequate layout and design computations, specifications, and estimates. Directs and reviews establishment and maintenance of record drawings and related files. Establishes technical engineering and architectural processes, criteria, and functions. Prepares or directs the preparation of engineering and architectural drawings, specifications and independent cost estimates for the construction, modification and maintenance of a wide variety of military buildings, structures, pavements, grounds, and utilities systems. Reviews architectural drawings, sketches, and specifications for technical adequacy, constructability, maintainability, and operability. Participates as technical consultant and government engineering/architectural representative in conferences with Architectural-Engineering firms to insure that completed designs meet Air Force requirements in terms of technical sufficiency.
5. Develops and maintains effective engineering staff relationships with base and tenant organizations. In staff meetings and in daily activities, presents briefings on acquisitions, construction, operation, maintenance, and financial management concerning real property facilities.
6. Performs other duties as assigned.
*The above description only mentions a limited amount of the position's official duties. For a full comprehensive document that covers all the duties of the position, please contact one of the Recruitment Specialists at the bottom of the announcement.
Requirements
Conditions of employment
- Participation in direct deposit is mandatory.
- U.S. citizenship is required.
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- The duties of this job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
- Must be able to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
- Federal employment suitability required and determined by a background investigation before appointment to position.
- May be required to successfully complete a probationary period.
- Must have a valid driver's license.
- Must be able to obtain/maintain the necessary security clearance for the position.
- May occasionally be required to work other than normal duty hours; shift work and/or overtime may be required.
- This position is designated as Essential Personnel and may be subject to duty in preparation for, or in response to, a state emergency or disaster declaration. This designation will not exceed 14 days per year unless approved in advance by the TAG.
- May be required to travel in military and/or commercial aircraft to perform temporary duty assignments.
AREAS OF CONSIDERATION:
Area 1: All on board permanent and indefinite T5 federal employees within the Oregon National Guard
Area 2: All on board permanent and indefinite T32 federal technicians within the Oregon National Guard
Area 3: All current non-permanent technicians/employees (T5 and T32) of the Oregon National Guard
Area 4: All current and former members of the Oregon National Guard (former members must provide documentation showing membership in the Oregon National Guard such as an NGB 22 or DD214)
Area 5: U.S. citizens
GENERAL AND SPECIALIZED EXPERIENCE REQUIREMENTS:
Work involves managing, supervising, leading, and/or performing professional engineering and scientific work. This position requires knowledge and skills in two or more professional engineering series within the Engineering and Architecture Group, 0800.
GS-12 and above - Must have 1-year equivalent to at least next lower grade level experience, education, or training in preparing technical and engineering drawings. Experience searching out and developing new or greatly modified methods and approaches to accomplish the Civil Engineering function. Experience in coordinating and negotiating with contractors and other personnel regarding engineering and administrative matters. Experience supervising and leading others within the Engineering Occupational Series.
Education
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
If you are using education to qualify for this position, you must provide transcripts or other documentation to support your Educational claims.
Additional information
Veterans Preference Applicants: Veterans' preference will be validated by reviewing submitted documentation. Acceptable documentation may be:
1. A copy of your DD-214, "Certificate of Release or Discharge from Active Duty," which shows dates of service and discharge under
honorable conditions.
2. A "certification" that is a written document from the armed forces that certifies the service member is expected to be discharged or released from active duty service in the armed forces under honorable conditions not later than 120 days after the date the certification is signed.
3. You may obtain a letter from the Department of Veterans Affairs reflecting your level of disability for preference eligibility by visiting a VA Regional Office, contacting a VA call center or online.
4. If claiming 10 point preference, you will need to submit a Standard Form, SF-15, "Application for 10-point Veterans' Preference."
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
The following applies to Bargaining Unit Positions:
Bargaining unit positions within the Oregon National Guard are represented by AFGE, local 2986 (AFL-CIO).
group id: DOAF
