Posted today
Secret
Unspecified
Unspecified
Construction/Facilities
Charleston, SC (On-Site/Office)
Duties
- Plans, designs, coordinates, installs, modifies, tests, repairs, and maintain transformers, converters, regulators, cables, switches, sectionalizes, circuit breakers, mechanical and electronic systems, and other circuit elements
- Plans, constructs, modifies, connects, inspects, locates and repairs overhead and underground electrical distribution lines
- Troubleshoots and maintains distribution circuits, airfield lighting, airfield computer panels, lightning protection systems (LPS), railroad grounding protection systems, railyard LPS, generating and controlling equipment, ship to shore power bunkers and cables
- Utilizes safety practices and procedures following established safety rules and regulations and maintains a safeand clean work environment
Requirements
Conditions of employment
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2800, Electrical Installation and Maintenance Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of a HIGH VOLTAGE ELECTRICIAN without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of technical practices in order to plan, layout, and complete maintenance or repair work needed for high voltage equipment and lines; and of high voltage electrical equipment and distribution lines such as transformers, switches, circuit breakers, recording instruments, control systems, series and parallel, circuits, line loading, line losses.
2. Knowledge of electrical and electronic theory, instruments used in shop, and trade practices; and of troubleshooting and locating defects and trouble spots.
3. Knowledge of safety regulations, procedures, and practices.
4. Skill in using and maintaining electrical tools and test equipment such as oscillators, phase sticks and rotation meters, digital test equipment, fault finding equipment, ampmeters, voltmeters, meggers, graphic recorders, dressing tools, wire tongs, wire tong supports, insulated tension links, tie sticks, and insulated hoods/covers and tools.
5. Ability to use electrical drawings, blueprints, circuit diagrams, and electronic schematics.
6. Ability to install, modify, test, repair, troubleshoot, and maintain high voltage electric power-controlling equipment and/or distribution lines without more than normal supervision.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
PHYSICAL EFFORT: The employee frequently performs moderately heavy lifting, pulling, and carrying of equipment and material weighing up to18 kilograms (40 pounds) and occasionally, lifts or pulls heavy cables and equipment weighing more than 23 kilograms (50pounds) with the help of weight handling equipment or with assistance from other workers. Work aloft on poles, at ground level, and in ground trenches or manholes. Work requires bending, stooping, climbing, and standing for long periods. Must be able to distinguish colors and shades of colors. At times, works in awkward positions and restricted spaces where coordination of hands, legs, and body are needed to perform tasks.
WORKING CONDITIONS: Works indoors and outdoors. Exposed to danger from explosions of equipment and cables in manholes and vaults, as well as danger from high voltage electrical shock, burns from solder, broken bones, cuts, and bruises. Exposed to heat and noise when working in substations, to extremes of weather when working outdoors, and to unpleasant odors and wet slippery surfaces when working in manholes. Subject to electrical burns while working around high voltage electrical lines, broken bones from falls from poles, and strains from awkward work positions. Also exposed to chemicals such as insulating oil from transformers and oil switches. Use personnel protective equipment such as earplugs, safety hats, and nonconductive gloves and footwear. Involves working in up to 120 foot bucket trucks, on ladders, on and around rotting machinery, and energized electrical equipment.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Incentives: Recruitment and/or retention incentives may or may not be used.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
- Plans, designs, coordinates, installs, modifies, tests, repairs, and maintain transformers, converters, regulators, cables, switches, sectionalizes, circuit breakers, mechanical and electronic systems, and other circuit elements
- Plans, constructs, modifies, connects, inspects, locates and repairs overhead and underground electrical distribution lines
- Troubleshoots and maintains distribution circuits, airfield lighting, airfield computer panels, lightning protection systems (LPS), railroad grounding protection systems, railyard LPS, generating and controlling equipment, ship to shore power bunkers and cables
- Utilizes safety practices and procedures following established safety rules and regulations and maintains a safeand clean work environment
Requirements
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
- This posn is subject to provisions of the DoD Priority Placement Program
- Disclosure of Political Appointments
- Direct Deposit: All federal employees are required to have direct deposit.
- Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period.
- Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
- Emergency overtime may be required.
- Position requires the ability to discern colors and contrast.
- May be required to possess a valid operator's license in order to drive a motor vehicle to and from work sites.
- AND/OR, may be required to procure a government operator's permit or obtain a commercial driver's license to drive and/or operate special electrical repair trucks and/or obtain a flight line drivers license
- Visually checks the work of contractors for compliance with contract specifications on new construction.
- The physical requirements of this position as determined by the manager are: The employee frequently performs moderately heavy lifting, pulling, and carrying of equipment and material weighing up to 18 kilograms (40 pounds)
- And occasionally, lifts or pulls heavy cables, equipment weighing more than 23 kilograms (50lbs) with the help of weight handling equipment or with assistance from other workers. Work aloft on poles, at ground level, in ground trenches or manholes
- Work requires bending, stooping, climbing, and standing for long periods. Must be able to distinguish colors and shades of colors.
- At times, works in awkward positions and restricted spaces where coordination of hands, legs, and body are needed to perform tasks.
- This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing.
- Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
- Must be able to obtain and maintain a Secret Clearance.
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2800, Electrical Installation and Maintenance Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of a HIGH VOLTAGE ELECTRICIAN without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of technical practices in order to plan, layout, and complete maintenance or repair work needed for high voltage equipment and lines; and of high voltage electrical equipment and distribution lines such as transformers, switches, circuit breakers, recording instruments, control systems, series and parallel, circuits, line loading, line losses.
2. Knowledge of electrical and electronic theory, instruments used in shop, and trade practices; and of troubleshooting and locating defects and trouble spots.
3. Knowledge of safety regulations, procedures, and practices.
4. Skill in using and maintaining electrical tools and test equipment such as oscillators, phase sticks and rotation meters, digital test equipment, fault finding equipment, ampmeters, voltmeters, meggers, graphic recorders, dressing tools, wire tongs, wire tong supports, insulated tension links, tie sticks, and insulated hoods/covers and tools.
5. Ability to use electrical drawings, blueprints, circuit diagrams, and electronic schematics.
6. Ability to install, modify, test, repair, troubleshoot, and maintain high voltage electric power-controlling equipment and/or distribution lines without more than normal supervision.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
PHYSICAL EFFORT: The employee frequently performs moderately heavy lifting, pulling, and carrying of equipment and material weighing up to18 kilograms (40 pounds) and occasionally, lifts or pulls heavy cables and equipment weighing more than 23 kilograms (50pounds) with the help of weight handling equipment or with assistance from other workers. Work aloft on poles, at ground level, and in ground trenches or manholes. Work requires bending, stooping, climbing, and standing for long periods. Must be able to distinguish colors and shades of colors. At times, works in awkward positions and restricted spaces where coordination of hands, legs, and body are needed to perform tasks.
WORKING CONDITIONS: Works indoors and outdoors. Exposed to danger from explosions of equipment and cables in manholes and vaults, as well as danger from high voltage electrical shock, burns from solder, broken bones, cuts, and bruises. Exposed to heat and noise when working in substations, to extremes of weather when working outdoors, and to unpleasant odors and wet slippery surfaces when working in manholes. Subject to electrical burns while working around high voltage electrical lines, broken bones from falls from poles, and strains from awkward work positions. Also exposed to chemicals such as insulating oil from transformers and oil switches. Use personnel protective equipment such as earplugs, safety hats, and nonconductive gloves and footwear. Involves working in up to 120 foot bucket trucks, on ladders, on and around rotting machinery, and energized electrical equipment.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Incentives: Recruitment and/or retention incentives may or may not be used.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
group id: DOAF
