Posted today
Secret
Unspecified
Unspecified
Healthcare and Science
Malmstrom AFB, MT (On-Site/Office)
Duties
DUTIES
DUTY 1: Performs a broad range of safety and occupational safety duties in one or more areas of confined space entry.
DUTY 2: Oversees Vehicle Operator Traffic Safety Program.
DUTY 3: Plans and carries out formal investigations of reportable, recordable and non-reportable mishaps involving personal injury accidents, property damage, and cases of occupational illnesses covering a wide range of work operations.
DUTY 4: Develops specialized operating practices, modifying or departing significantly from standard technique when necessary based on interpretation of policies, standards, and regulations.
DUTY 5: Reviews plans and specifications for new construction, major building alterations, and/or changes in installation equipment and monitors project through completion to ensure compliance with safety codes and standards.
Requirements
Conditions of employment
In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Administrative and Management Positions.
BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT:
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
Education
Undergraduate and Graduate Education: Major study -- safety or occupational health fields (safety, occupational health, industrial hygiene), or degree in other related fields that included or was supplemented by at least 24 semester hours of study from among the following (or closely related) disciplines: safety, occupational health, industrial hygiene, occupational medicine, toxicology, public health, mathematics, physics, chemistry, biological sciences, engineering, and industrial psychology.
OR
Experience
Specialized Experience (for positions above GS-5): Experience in or related to safety and occupational health that provided the specific knowledge, skills, and abilities to perform successfully the duties of the position. Examples of qualifying specialized experience include:
OR
Certificates
Certification as a Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), or Certified Health Physicist (CHP), or similar certification that included successful completion of a written examination meets the requirements for GS-5. Applicants may also qualify for higher grade levels based on their education and/or experience.
SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-07, or equivalent in other pay systems. Examples of specialized experience includes: 1) Managing safety or occupational health program elements. 2) Developing and recommending safety and occupational health policy to higher levels of management. 3) Applying safety and occupational health laws, regulations, principles, theories, practices, and procedures to advise on or resolve technical matters dealing with occupational safety and health requirements. 4) Developing safety and occupational health standards, regulations, practices, and procedures to eliminate or control potential hazards. 5) Developing or implementing programs to reduce the frequency, severity, and cost of accidents and occupational illnesses. 6) Analyzing or evaluating new and existing jobs, processes, products, or other systems to determine the existence, severity, probability, and outcome of hazards. 7) Designing or modifying workplaces, processes, products, or other systems to control or eliminate hazards. 8) Inspecting or surveying workplaces, processes, products, or other systems for compliance with established safety and occupational health policies or standards and to identify potential new hazards. 9) Training of workers, supervisors, managers, or other safety and occupational health personnel in safety or occupational health subjects. 10) Work in occupational fields such as industrial hygienist, safety engineer, fire prevention engineer, health physicist, and occupational health nurse.
OR
EDUCATION: 1 full year of graduate level education
or
superior academic achievement
OR
COMBINATION OF EXPERIENCE AND EDUCATION: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. NOTE: You must submit a copy of your transcripts.
FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-07 level is required to meet the time-in-grade requirements for the GS-09 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of numerous established safety and occupational health principles, practices, procedures, laws, regulations, and current legislative issues as they relate to the military installation ground safety program; the requirements, methods, and techniques of accident and mishap investigation, analysis, resolution of normal occupational safety problems/health risks, and formal reporting procedures; and risk assessment methods and techniques for evaluating normal occupational safety and health risks.
2. Knowledge of communication techniques, principles, and regulations to communicate effectively, both orally and in writing, in responding to work related problems and questions.
3. Knowledge of basic confined space standards, methods, practices, techniques, materials, and equipment to determine compliance with regulations and standards. Ability to communicate training information in a formal classroom setting, and to conduct on-the-job training in confined spaces.
4. Ability to plan, organize work, and meet deadlines.
5. Diagnoses, repairs and overhauls hydraulics, electronic components, electrical and fuel systems, etc. for various types of training vehicles/equipment such as, SkidCar systems, HEAT trainer system.
6. Assists in the writing training plans and specifications for acquisition of all training vehicles/equipment.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click to check accreditation.
FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Direct Deposit: All federal employees are required to have direct deposit.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
DUTIES
DUTY 1: Performs a broad range of safety and occupational safety duties in one or more areas of confined space entry.
DUTY 2: Oversees Vehicle Operator Traffic Safety Program.
DUTY 3: Plans and carries out formal investigations of reportable, recordable and non-reportable mishaps involving personal injury accidents, property damage, and cases of occupational illnesses covering a wide range of work operations.
DUTY 4: Develops specialized operating practices, modifying or departing significantly from standard technique when necessary based on interpretation of policies, standards, and regulations.
DUTY 5: Reviews plans and specifications for new construction, major building alterations, and/or changes in installation equipment and monitors project through completion to ensure compliance with safety codes and standards.
Requirements
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- The employee must obtain and maintain a Secret security clearance
- If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
- This position is subject to provisions of the DoD Priority Placement Program
- Position may be subject to random drug testing
- Disclosure of Political Appointments
- Advance in hire may be authorized if there is demonstrable proof provided on your resume
- Leave accrual may be authorized upon request
- The work requires the incumbent to drive a motor vehicle. A valid state driver's license must be obtained and maintained for the position
- Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period.
- Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Administrative and Management Positions.
BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT:
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
Education
Undergraduate and Graduate Education: Major study -- safety or occupational health fields (safety, occupational health, industrial hygiene), or degree in other related fields that included or was supplemented by at least 24 semester hours of study from among the following (or closely related) disciplines: safety, occupational health, industrial hygiene, occupational medicine, toxicology, public health, mathematics, physics, chemistry, biological sciences, engineering, and industrial psychology.
OR
Experience
Specialized Experience (for positions above GS-5): Experience in or related to safety and occupational health that provided the specific knowledge, skills, and abilities to perform successfully the duties of the position. Examples of qualifying specialized experience include:
- Managing safety or occupational health program elements.
- Developing and recommending safety and occupational health policy to higher levels of management.
- Applying safety and occupational health laws, regulations, principles, theories, practices, and procedures to advise on or resolve technical matters dealing with occupational safety and health requirements.
- Developing safety and occupational health standards, regulations, practices, and procedures to eliminate or control potential hazards.
- Developing or implementing programs to reduce the frequency, severity, and cost of accidents and occupational illnesses.
- Analyzing or evaluating new and existing jobs, processes, products, or other systems to determine the existence, severity, probability, and outcome of hazards.
- Designing or modifying workplaces, processes, products, or other systems to control or eliminate hazards.
- Inspecting or surveying workplaces, processes, products, or other systems for compliance with established safety and occupational health policies or standards and to identify potential new hazards.
- Training of workers, supervisors, managers, or other safety and occupational health personnel in safety or occupational health subjects.
- Work in occupational fields such as industrial hygienist, safety engineer, fire prevention engineer, health physicist, and occupational health nurse.
OR
Certificates
Certification as a Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), or Certified Health Physicist (CHP), or similar certification that included successful completion of a written examination meets the requirements for GS-5. Applicants may also qualify for higher grade levels based on their education and/or experience.
SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-07, or equivalent in other pay systems. Examples of specialized experience includes: 1) Managing safety or occupational health program elements. 2) Developing and recommending safety and occupational health policy to higher levels of management. 3) Applying safety and occupational health laws, regulations, principles, theories, practices, and procedures to advise on or resolve technical matters dealing with occupational safety and health requirements. 4) Developing safety and occupational health standards, regulations, practices, and procedures to eliminate or control potential hazards. 5) Developing or implementing programs to reduce the frequency, severity, and cost of accidents and occupational illnesses. 6) Analyzing or evaluating new and existing jobs, processes, products, or other systems to determine the existence, severity, probability, and outcome of hazards. 7) Designing or modifying workplaces, processes, products, or other systems to control or eliminate hazards. 8) Inspecting or surveying workplaces, processes, products, or other systems for compliance with established safety and occupational health policies or standards and to identify potential new hazards. 9) Training of workers, supervisors, managers, or other safety and occupational health personnel in safety or occupational health subjects. 10) Work in occupational fields such as industrial hygienist, safety engineer, fire prevention engineer, health physicist, and occupational health nurse.
OR
EDUCATION: 1 full year of graduate level education
or
superior academic achievement
OR
COMBINATION OF EXPERIENCE AND EDUCATION: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. NOTE: You must submit a copy of your transcripts.
FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-07 level is required to meet the time-in-grade requirements for the GS-09 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of numerous established safety and occupational health principles, practices, procedures, laws, regulations, and current legislative issues as they relate to the military installation ground safety program; the requirements, methods, and techniques of accident and mishap investigation, analysis, resolution of normal occupational safety problems/health risks, and formal reporting procedures; and risk assessment methods and techniques for evaluating normal occupational safety and health risks.
2. Knowledge of communication techniques, principles, and regulations to communicate effectively, both orally and in writing, in responding to work related problems and questions.
3. Knowledge of basic confined space standards, methods, practices, techniques, materials, and equipment to determine compliance with regulations and standards. Ability to communicate training information in a formal classroom setting, and to conduct on-the-job training in confined spaces.
4. Ability to plan, organize work, and meet deadlines.
5. Diagnoses, repairs and overhauls hydraulics, electronic components, electrical and fuel systems, etc. for various types of training vehicles/equipment such as, SkidCar systems, HEAT trainer system.
6. Assists in the writing training plans and specifications for acquisition of all training vehicles/equipment.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click to check accreditation.
FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Direct Deposit: All federal employees are required to have direct deposit.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
group id: DOAF
