Posted today
Secret
Unspecified
Unspecified
Engineering - Systems
Bethesda, MD (On-Site/Office)
Duties
Help
Requirements
Help
Conditions of employment
Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-13 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following:
GS-13: In addition to the Basic Requirements and Selective Placement Factor (SPF) for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing the following duties: 1) Reviewing and accepting of contractor administrative submittals such as schedules (both bar charts and networks), environmental protection plan, design and construction quality control plan, health and safety plan, accident prevention plan; and coordinate review and approval of technical "Government-approved" submittals such as shop drawings, product data, samples, design data, manufacturer's instructions, test plans/reports, certificates, and O&M data in a timely manner; 2) Monitoring available project budget and time constraints, including relevant cost and schedule growth metrics, and initiating appropriate planning and corrective action as necessary to ensure funding thresholds and impacts to operational needs are not exceeded; 3) Possess a keen understanding of schedules utilizing network analysis and the potential impact of modifications to the critical path; 4) Coordinating delivery, acceptance, inspection and installation of equipment; 5) Preparing contractor performance evaluations and processing awards for outstanding performance if applicable; and 6) Providing technical support for claims/disputes/terminations processing, negotiation and resolution.
GS-12 : In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing the following duties:1) Assisting higher graded construction managers in overseeing or providing construction engineering support for capital improvement projects including military construction and facilities major renovations; 2) Managing multiple priorities and provide technical recommendations/solutions to complex problems encountered during the administration of the construction contracts; 3) Managing the contractor Requests for Information (RFIs) and ensuring timely responses; 4) Visiting construction sites to monitor progress and soliciting daily input from the Engineering Technician/Quality Assurance (ET/QA) representatives and CQC reports; and attending QC meetings including preparatory meetings involving critical work activities; and 5) Ensuring contractors are conducting monthly site safety self-evaluations and submitting the information with the pay vouchers/invoices.
Selective Placement Factor (SPF) : If applying for this position, there is a Selective Placement Factor which is current registration as a Professional Engineer (PE) or Architect (RA) in any state, District of Columbia, Guam or Puerto Rico. Do you meet this requirement?
Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
Additional information
This position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
Help
- You will be participating in pre-award contract meetings such as Technical Evaluation Teams (TETs), Functional Analysis Concept Development (FACDs) meetings and constructability reviews.
- You will take appropriate and timely action to ensure contractor compliance of safety and health requirements, including recommendations for dismissal of personnel due to non-performance or recurring violations.
- You will review and manage the contractor's administrative and technical submittals and Contractor's Request for information (RFIs) ensuring timely responses.
- You will issue requests for proposals, prepare independent Government Estimates and assist the Contracting Officer in negotiating Contractor's proposals when requested.
- You will ensure enforcement of all technical and administrative provisions of assigned construction contracts.
Requirements
Help
Conditions of employment
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
- You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
- You will be required to provide and maintain a current Registration as a Professional Engineer or Registered Architect license.
Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-13 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following:
GS-13: In addition to the Basic Requirements and Selective Placement Factor (SPF) for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing the following duties: 1) Reviewing and accepting of contractor administrative submittals such as schedules (both bar charts and networks), environmental protection plan, design and construction quality control plan, health and safety plan, accident prevention plan; and coordinate review and approval of technical "Government-approved" submittals such as shop drawings, product data, samples, design data, manufacturer's instructions, test plans/reports, certificates, and O&M data in a timely manner; 2) Monitoring available project budget and time constraints, including relevant cost and schedule growth metrics, and initiating appropriate planning and corrective action as necessary to ensure funding thresholds and impacts to operational needs are not exceeded; 3) Possess a keen understanding of schedules utilizing network analysis and the potential impact of modifications to the critical path; 4) Coordinating delivery, acceptance, inspection and installation of equipment; 5) Preparing contractor performance evaluations and processing awards for outstanding performance if applicable; and 6) Providing technical support for claims/disputes/terminations processing, negotiation and resolution.
GS-12 : In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing the following duties:1) Assisting higher graded construction managers in overseeing or providing construction engineering support for capital improvement projects including military construction and facilities major renovations; 2) Managing multiple priorities and provide technical recommendations/solutions to complex problems encountered during the administration of the construction contracts; 3) Managing the contractor Requests for Information (RFIs) and ensuring timely responses; 4) Visiting construction sites to monitor progress and soliciting daily input from the Engineering Technician/Quality Assurance (ET/QA) representatives and CQC reports; and attending QC meetings including preparatory meetings involving critical work activities; and 5) Ensuring contractors are conducting monthly site safety self-evaluations and submitting the information with the pay vouchers/invoices.
Selective Placement Factor (SPF) : If applying for this position, there is a Selective Placement Factor which is current registration as a Professional Engineer (PE) or Architect (RA) in any state, District of Columbia, Guam or Puerto Rico. Do you meet this requirement?
Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
Additional information
This position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
group id: DODAF
