Job Requirements
San Antonio, TX
Secret Polygraph Unspecified
Career Level not specified
Salary not specified
Join Premium to unlock estimated salaries 
Job Description
Indotronix is seeking an Aircraft Electrical Mechanic 3 (Onsite) in San Antonio, TX. 78226.
Hourly Payrate Range: $35/hr to $40/hr. on W2.
Onsite Job: Aircraft Electrical Mechanic (level 3)
Work Location: San Antonio, TX. 78226
Duration: 09+ Months Contract
Shift: Variable, 5:00 AM to 11:30 PM
Ability to work variable shifts (1st, 2nd & 3rd) including weekends and overtime
Travel: Potential for up to 25% travel
Ability to obtain Secret Clearance - post start
High School Diploma/GED and 10+ years of experience
Job Description:
• Client is looking for Experienced Electrical Mechanics (level 3) to join our Executive Fleet team in San Antonio, TX.
Position Responsibilities:
• Perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring
• Ability and understanding of routing instructions and handling of harnesses.
• Perform sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes
• Read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modifications and repairs
• Use tooling assemblies and fixtures for depot level modification and repair of electrical wiring
• Perform assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft
• Troubleshoot organizational and depot maintenance level malfunctions in aircraft electrical and comms/nav-systems
• Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc...
• Use all equipment in accordance with established safety and operating procedures.
• Perform all tasks involved in the coordination, preparation, and movement of material and tools
• Operate riding type electric powered elevating equipment to accomplish work assignments
• Maintain necessary certifications, licenses and permits as required for assigned work.
• Perform all duties of lower Electrical classifications as required to successfully accomplish assignments
Ability to perform the following requirements:
• The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
• Exposure to noise, working on elevated platforms
• Use personal protective gear for face, eyes, ears, hand, and arms as required.
• Pass visual acuity and color perception tests
• Read, write, and comprehend the English language
• Handle, use, and dispose of hazardous material
• Obtain & maintain training certifications as required to support assignment responsibilities
• Occasional (1 to 3 hrs) finger manipulation
• On occasion, a 2-person lift may be necessary for weights greater than 50 lbs
• Frequent reaching overhead (3 to 6 hrs)
• Frequent walking on flat surfaces
• Frequent standing flat or uneven surfaces
• Frequent balancing on a ladder, steps, or uneven surfaces
• Occasional climbing on 3-12 ft ladders or stands
• Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls for an extended period of time
• Occasional contact with metals
• Frequent exposure to noise
Basic Qualifications (Required Skills/Experience):
• 10+ years of experience with electrical/electronic theories and avionics systems, shop mathematics and practices
• 10+ years of experience in working with schematics, specifications, assembly drawings and standard operating procedures.
• 10+ years of experience with component and wire installation to include repairing, modifying, testing and troubleshooting new, experimental, and disturbed systems
• Experience with fabricating new wire bundles
• Experience with routing and installing wire bundles on airplanes without existing wiring (commercial routing experience preferred)
• Ability to work variable shifts including weekends and overtime
Preferred Qualifications (Desired Skills/Experience):
• Experience with Avionics
• Experience with Depot Level/Modification maintenance.
• Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment
• FAA certification in Airframe and/or Power Plant
Regular and predictable attendance is a requirement of this request.
Education / Experience: HSD/GED
Hourly Payrate Range: $35/hr to $40/hr. on W2.
Onsite Job: Aircraft Electrical Mechanic (level 3)
Work Location: San Antonio, TX. 78226
Duration: 09+ Months Contract
Shift: Variable, 5:00 AM to 11:30 PM
Ability to work variable shifts (1st, 2nd & 3rd) including weekends and overtime
Travel: Potential for up to 25% travel
Ability to obtain Secret Clearance - post start
High School Diploma/GED and 10+ years of experience
Job Description:
• Client is looking for Experienced Electrical Mechanics (level 3) to join our Executive Fleet team in San Antonio, TX.
Position Responsibilities:
• Perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring
• Ability and understanding of routing instructions and handling of harnesses.
• Perform sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes
• Read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modifications and repairs
• Use tooling assemblies and fixtures for depot level modification and repair of electrical wiring
• Perform assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft
• Troubleshoot organizational and depot maintenance level malfunctions in aircraft electrical and comms/nav-systems
• Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc...
• Use all equipment in accordance with established safety and operating procedures.
• Perform all tasks involved in the coordination, preparation, and movement of material and tools
• Operate riding type electric powered elevating equipment to accomplish work assignments
• Maintain necessary certifications, licenses and permits as required for assigned work.
• Perform all duties of lower Electrical classifications as required to successfully accomplish assignments
Ability to perform the following requirements:
• The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
• Exposure to noise, working on elevated platforms
• Use personal protective gear for face, eyes, ears, hand, and arms as required.
• Pass visual acuity and color perception tests
• Read, write, and comprehend the English language
• Handle, use, and dispose of hazardous material
• Obtain & maintain training certifications as required to support assignment responsibilities
• Occasional (1 to 3 hrs) finger manipulation
• On occasion, a 2-person lift may be necessary for weights greater than 50 lbs
• Frequent reaching overhead (3 to 6 hrs)
• Frequent walking on flat surfaces
• Frequent standing flat or uneven surfaces
• Frequent balancing on a ladder, steps, or uneven surfaces
• Occasional climbing on 3-12 ft ladders or stands
• Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls for an extended period of time
• Occasional contact with metals
• Frequent exposure to noise
Basic Qualifications (Required Skills/Experience):
• 10+ years of experience with electrical/electronic theories and avionics systems, shop mathematics and practices
• 10+ years of experience in working with schematics, specifications, assembly drawings and standard operating procedures.
• 10+ years of experience with component and wire installation to include repairing, modifying, testing and troubleshooting new, experimental, and disturbed systems
• Experience with fabricating new wire bundles
• Experience with routing and installing wire bundles on airplanes without existing wiring (commercial routing experience preferred)
• Ability to work variable shifts including weekends and overtime
Preferred Qualifications (Desired Skills/Experience):
• Experience with Avionics
• Experience with Depot Level/Modification maintenance.
• Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment
• FAA certification in Airframe and/or Power Plant
Regular and predictable attendance is a requirement of this request.
Education / Experience: HSD/GED
group id: indony