Posted today
Secret
Unspecified
Unspecified
Construction/Facilities
Okinawa, Japan (On-Site/Office)
Duties
Conditions of employment
Condition of Employment Continue
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-5300 Industrial Equipment Maintenance Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is ability to do the work of a WG-5301 HVAC/R EQUIPMENT MECHANIC without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of the principles and theories of air conditioning and refrigeration and properties of refrigerants; mechanical, electromechanical, and pneumatic principles to inspect, install, test, maintain, and repair power boilers and associated auxiliary and pollution control equipment; and the construction and operation of a variety of large industrial and commercial refrigeration and A/C systems.
2. Knowledge of electronic theory and circuits and basic logic circuits for power, timing, and motion controls, indicating and counting mechanisms, similar devices and a variety of technical data, such as schematics, diagrams, and technical orders relating to the electronics trade.
3. Knowledge of safety, environmental, and security regulations, practices, and procedures; regulations, procedures, and policies related to records maintenance and documentation to include Refrigerant Compliance Management program.
4. Skill in dismantling, repairing, and reassembling pumps, impellers, compressors, chillers, receivers, and evaporators to include balancing, aligning, and maintaining turbines, pumps, generators, and preheaters.
5. Skill in the use of hand and power tools of the electronics trade to include a variety of electronic, electrical, or electromechanical test and measurement equipment.
6. Ability to read and interpret instructions, specifications, etc. (including blueprints, schematics, drawings, and sketches). Ability to communicate effectively, both orally and in writing.
Physical Effort
The employee lifts, carries, and handles equipment up to 50 pounds unassisted and over 50 pounds with assistance. Works from ladders, scaffolding platforms, or cramped areas where equipment, parts, or tools are hard to reach. Work requires frequent stooping, stretching, bending, kneeling, and working in tiring, uncomfortable positions for long periods. In addition, work involves frequent movement and maneuvering of large, heavy equipment using hoists, holders, and pulleys as required.
Working Conditions
The employee works indoors and outdoors, on elevated structures, and in cramped areas. Subject to discomfort from face masks or other protective devices when there is a possibility of exposure to toxic refrigerants, chemicals, heat, steam, noise, noxious gases, fumes or acids. Occasionally works outside, on top of buildings, in drafty attic spaces, and in cramped areas with low overheads. Works near moving parts of equipment and machinery, energized electrical circuits, sharp metal edges, loud noises, and toxic fumes, which could cause cuts, burns, bruises, strains, electrical shocks, chemical irritations and respiratory ailments. May be subject to sudden and frequent temperature changes. To reduce dangers from these and other similar situations, follows prescribed safety practices and uses safety equipment, such as safety glasses, hard-toe shoes, respirators, hard hats, and fire retardant gloves.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Important Overseas Information: Applicants interested in applying for overseas locations please click to review important information regarding exceptional family member program.
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
PCS expenses if authorized will be paid IAW JTR and Air Force Regulations, more information on PCS benefits/requirements may be found at the following link:
- Plans, lays out, installs, maintains, and repairs a variety of large complex commercial and industrial systems and supporting equipment.
- Installs, modifies, overhauls, repairs, and maintains a variety of complex heating boilers and/or heating systems, single and multiple fuel power boilers, and associated auxiliary and pollution control equipment.
- Installs, overhauls, repairs, fabricates, and/or modifies various types of electronically controlled industrial equipment characterized by moderate complexity of design, construction, and function. Dismantles, repairs, and reassembles systems, components, and subassemblies.
- Plans and lays out work from blue prints, sketches, drawings, electrical and electronic block diagrams, wiring diagrams, schematics, specifications, guides, codes, work orders, and technical orders.
- Utilizes safety practices and procedures following established rules and regulations to maintain a safe and clean work environment.
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- This position is subject to provisions of the DoD Priority Placement Program
- If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements may be found at: https://afciviliancareers.com/regulatory/
- Disclosure of Political Appointments
- Position requires Chlorofluorocarbon/Non-Chlorofluorocarbon (CFC/NCFC) Universal Certification as required by 40 CFR Part 82, Subpart F
- Position requires the ability to discern colors, contrast, and depth
- The work will require the employee to drive a motor vehicle. An appropriate, valid driver's license will be required for the position
- This is a drug testing designated position. The incumbent is subject to random testing for drug use IAW AFI 44-107, Attachment 2, Category I, Type 2: Motor Vehicle Operators
- On occasions the employee will be required to work under adverse environmental conditions
- Emergency overtime may be required
- Recruitment Incentive may be authorized for this position
- Relocation Incentive may be authorized for this position
- Shift work may be required.
- Employees and family members requiring medical/dental care in the overseas location are responsible for obtaining/paying for care. Access for these members to military medical/dental treatment facilities is on space-available/reimbursable basis only.
- Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants.
- The DoD Policy for Employed Annuitants (Reemployed Annuitants) can be found at: www.esd.whs.mil/Portals/54/Documents/DD/issuances/140025/140025_vol300.PDF?ver=LQ7feWw-8-5DI2tceUpmgA%3d%3d
- Direct Deposit: All federal employees are required to have direct deposit
- Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period.
- Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
Condition of Employment Continue
- The employee may be required to work other than normal duty hours, which may include evenings, weekends, and/or holidays.
- Must be able to obtain and maintain a Secret clearance.
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-5300 Industrial Equipment Maintenance Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is ability to do the work of a WG-5301 HVAC/R EQUIPMENT MECHANIC without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of the principles and theories of air conditioning and refrigeration and properties of refrigerants; mechanical, electromechanical, and pneumatic principles to inspect, install, test, maintain, and repair power boilers and associated auxiliary and pollution control equipment; and the construction and operation of a variety of large industrial and commercial refrigeration and A/C systems.
2. Knowledge of electronic theory and circuits and basic logic circuits for power, timing, and motion controls, indicating and counting mechanisms, similar devices and a variety of technical data, such as schematics, diagrams, and technical orders relating to the electronics trade.
3. Knowledge of safety, environmental, and security regulations, practices, and procedures; regulations, procedures, and policies related to records maintenance and documentation to include Refrigerant Compliance Management program.
4. Skill in dismantling, repairing, and reassembling pumps, impellers, compressors, chillers, receivers, and evaporators to include balancing, aligning, and maintaining turbines, pumps, generators, and preheaters.
5. Skill in the use of hand and power tools of the electronics trade to include a variety of electronic, electrical, or electromechanical test and measurement equipment.
6. Ability to read and interpret instructions, specifications, etc. (including blueprints, schematics, drawings, and sketches). Ability to communicate effectively, both orally and in writing.
Physical Effort
The employee lifts, carries, and handles equipment up to 50 pounds unassisted and over 50 pounds with assistance. Works from ladders, scaffolding platforms, or cramped areas where equipment, parts, or tools are hard to reach. Work requires frequent stooping, stretching, bending, kneeling, and working in tiring, uncomfortable positions for long periods. In addition, work involves frequent movement and maneuvering of large, heavy equipment using hoists, holders, and pulleys as required.
Working Conditions
The employee works indoors and outdoors, on elevated structures, and in cramped areas. Subject to discomfort from face masks or other protective devices when there is a possibility of exposure to toxic refrigerants, chemicals, heat, steam, noise, noxious gases, fumes or acids. Occasionally works outside, on top of buildings, in drafty attic spaces, and in cramped areas with low overheads. Works near moving parts of equipment and machinery, energized electrical circuits, sharp metal edges, loud noises, and toxic fumes, which could cause cuts, burns, bruises, strains, electrical shocks, chemical irritations and respiratory ailments. May be subject to sudden and frequent temperature changes. To reduce dangers from these and other similar situations, follows prescribed safety practices and uses safety equipment, such as safety glasses, hard-toe shoes, respirators, hard hats, and fire retardant gloves.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Important Overseas Information: Applicants interested in applying for overseas locations please click to review important information regarding exceptional family member program.
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
PCS expenses if authorized will be paid IAW JTR and Air Force Regulations, more information on PCS benefits/requirements may be found at the following link:
group id: DOAF
