Posted today
Secret
$86,472 - $109,867
Unspecified
Engineering - Mechanical
Fort Shafter, HI (On-Site/Office)
Duties
Help
Requirements
Help
Conditions of employment
Who May Apply: US Citizens
In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document .
Basic Requirement for Mechanical Engineer:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
Specialized Experience for GS-11: One year of specialized experience which includes (1) participating in preparing mechanical designs for various projects; AND (2) participating in inspections of construction activities to ascertain that construction is in compliance with mechanical plans and specifications.
This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.
Specialized Experience for GS-12: One year of specialized experience which includes (1) performing technical reviews of mechanical design including plans, specifications, and documents for various projects; (2) planning and developing mechanical designs for various facilities; AND (3) performing inspections of construction activities to ascertain that construction is in compliance with mechanical plans and specifications.
This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).
Education
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/
Additional information
Help
- Provide regional level services as a senior Mechanical Engineer and design coordinator for a wide range of conventional and unconventional Military Construction projects.
- Develop mechanical designs in coordination with design inputs from associated engineering disciplines.
- Perform technical reviews of mechanical designs developed by architectural engineering (A-E) firms.
- Resolve mechanical design related problems arising during construction.
Requirements
Help
Conditions of employment
- Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
- Incumbent is required to obtain and maintain a secret security clearance.
- TDY may be required approximately 10%.
- Incumbent is required to submit an annual financial disclosure form OGE-450.
- Incumbent is required to obtain and maintain a valid state driver's license.
- This position is an Army Acquisition, Technology, and Logistics Workforce position.
- On a voluntary basis the incumbent of this position could serve at the Honolulu District as a member of the Honolulu District Base Development Team (BDT).
- Incumbent is preferred, but not required to possess an active Professional Engineer (P.E.) license at the full performance GS-12 level.
Who May Apply: US Citizens
In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document .
Basic Requirement for Mechanical Engineer:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
Specialized Experience for GS-11: One year of specialized experience which includes (1) participating in preparing mechanical designs for various projects; AND (2) participating in inspections of construction activities to ascertain that construction is in compliance with mechanical plans and specifications.
This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.
Specialized Experience for GS-12: One year of specialized experience which includes (1) performing technical reviews of mechanical design including plans, specifications, and documents for various projects; (2) planning and developing mechanical designs for various facilities; AND (3) performing inspections of construction activities to ascertain that construction is in compliance with mechanical plans and specifications.
This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).
Education
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/
Additional information
- Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
- You will be required to provide proof of U.S. Citizenship.
- One year probationary period may be required.
- Direct Deposit of Pay is required.
- This position requires you to submit a Public Financial Disclosure Report (OGE 278) or a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter.
- Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
- If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
- This is a Construction, Engineering and Infrastructure Career Field position.
- Salary includes applicable locality pay or Local Market Supplement.
- Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
- Incentives may be authorized on case-by-case basis, subject to agency determination and approval.
- This is a career ladder position. The target grade is GS-12. Selection may be made at either the GS-11 or the GS-12 grade. If selected at the GS-11 grade, there is non-competitive promotion potential to the target grade. Non-competitive promotion potential to the target grade is based on time-in-grade requirements and demonstrated ability to perform the higher-graded duties. Promotion is neither automatic nor is it guaranteed.
- Salary Details: GS-11: $86,472 - $109,867 per year; GS-12: $95,994 - $124,031 per year
group id: DODAF
