Posted today
Secret
Unspecified
Unspecified
Engineering - Mechanical
Murrieta, CA (On-Site/Office)
Work Arrangement
This is a full-time, onsite position as part of our Internship Program.
This position performs functions or is immediately available to perform functions that are considered safety sensitive for the purpose of maintenance or preventive maintenance as defined by 14 CFR 121. Therefore, employment and continued employment with the company is conditioned upon full compliance with the company's Antidrug and Alcohol Misuse Prevention Program as required by 14 CFR Part 120, 135, 145 and 49 CFR Part 40.
Job Overview
The Design Engineering Intern at AEVEX Aerospace supports the design team involved in aircraft structural and system modifications. Assignments may involve introductory use of 3D CAD design software or FEMAP/NASTRAN FEM software. Specific design tasks will vary, and may involve document control, design and completion of engineering drawings, review of aircraft components and sub-systems, payload integration design, aircraft weight & balance assessment, basic composite tooling design, airframe and component surveying for reverse engineering, ground support equipment design and/or analysis, specification conformance and documentation. The Design Engineering Intern works under the guidance of experienced aerospace engineers in AEVEX's Engineering Department.
The AEVEX Internship Program gives individuals who are early in their career the opportunity to gain valuable learning opportunities while discussing goals, evaluating performance and receiving regular feedback.
Essential Functions
Standard Essential Functions
Qualifications
Education / Certifications
Experience
Physical Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:
Security Clearance
AEVEX provides a reasonable range of compensation. Actual compensation is influenced by an array of factors including, but not limited to, skill set, level of experience, and specific location. The range of starting pay for this position is for the listed location only.
Salary Range
$20 - $25 USD
About AEVEX
AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia.
AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees.
Equal Employment Opportunity:
AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.
Create a Job Alert
Interested in building your career at AEVEX? Get future opportunities sent straight to your email.
Create alert
This is a full-time, onsite position as part of our Internship Program.
This position performs functions or is immediately available to perform functions that are considered safety sensitive for the purpose of maintenance or preventive maintenance as defined by 14 CFR 121. Therefore, employment and continued employment with the company is conditioned upon full compliance with the company's Antidrug and Alcohol Misuse Prevention Program as required by 14 CFR Part 120, 135, 145 and 49 CFR Part 40.
Job Overview
The Design Engineering Intern at AEVEX Aerospace supports the design team involved in aircraft structural and system modifications. Assignments may involve introductory use of 3D CAD design software or FEMAP/NASTRAN FEM software. Specific design tasks will vary, and may involve document control, design and completion of engineering drawings, review of aircraft components and sub-systems, payload integration design, aircraft weight & balance assessment, basic composite tooling design, airframe and component surveying for reverse engineering, ground support equipment design and/or analysis, specification conformance and documentation. The Design Engineering Intern works under the guidance of experienced aerospace engineers in AEVEX's Engineering Department.
The AEVEX Internship Program gives individuals who are early in their career the opportunity to gain valuable learning opportunities while discussing goals, evaluating performance and receiving regular feedback.
Essential Functions
- Creates engineering drawings for aircraft modifications and/or repairs
- Completes models and drawings using Catia design software
- Hand sketches design configurations to articulate concepts
- Works closely with other departments to clarify engineering drawing/document requirements
- Conducts liaison engineering as needed
- Performs survey measurement of existing airframe structure for reverse engineering purposes
- Completes structural analysis for aircraft modification and repairs
- Communicates with stress analysts and airframe mechanics to complete repair drawings
- Collaborates with senior designers and draftsmen to complete engineering drawing packages
- Performs other related duties as assigned
Standard Essential Functions
- Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
- Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
- Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture.
Qualifications
- Strong organizational and communications skills, verbal and written
- Strong attention to detail and creative problem solving skills
- Ability to read and interpret technical data, repair drawings and/or engineering drawings
- Experience in MS Office Suite and strong computer skills for report writing and analysis preparation
Education / Certifications
- Current enrollment in a bachelors program at an accredited university in the field of Mechanical, Aeronautical and/or Aerospace Engineering
Experience
- No prior experience necessary.
- Prior internship activities in the aerospace industry a plus
Physical Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:
- Frequently required repetitive movements of wrists, hands, and/or fingers
- Constantly required to sit, and to reach to use computers and other office equipment
- Occasionally experience a high level of noise, adverse weather or temperature conditions
Security Clearance
- Not Applicable
AEVEX provides a reasonable range of compensation. Actual compensation is influenced by an array of factors including, but not limited to, skill set, level of experience, and specific location. The range of starting pay for this position is for the listed location only.
Salary Range
$20 - $25 USD
About AEVEX
AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia.
AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees.
Equal Employment Opportunity:
AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.
Create a Job Alert
Interested in building your career at AEVEX? Get future opportunities sent straight to your email.
Create alert
group id: 10501158
