Posted today
Secret
Unspecified
Unspecified
Engineering - Mechanical
Montgomery, AL (On-Site/Office)
Duties
1. Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Installs serviceable components into aircraft and performs total systems alignment and harmonization in accordance with existing technical orders and directives. Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). (25%)
2. Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal. (20%)
3. Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off-equipment maintenance on aircraft avionics such as automatic flight control systems, instrument systems, communication and navigation systems, and inertial navigations systems. Coordinates back shop bench check; completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pitot-static testers, programming units and special purpose test analyzers. (20%)
4. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Documents all discrepancies and maintenance actions performed by inputting information into the electronic records information systems (i.e.: CAMS, IMDS, GO-81, REMIS). Recommends hardware and software changes. Submits change recommendations to Technical Orders. Requisitions supply assets and processes repairable assets in accordance with Standard Base Supply System requirements.(15%)
5. May upload/download chaff/flare dispensers. This hazardous task may involve the inspection, storage and handling of explosive devices; to include flares, chaff, impulse cartridges and similar items. Prepares for and participates in Aerospace Expeditionary Force (AEF) tasking, deployments and various inspections and exercises. Processes and accounts for due-in from maintenance (DIFM) supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification. (10%)
6. May be required to perform additional duties such as structural fire-fighting, aircraft fire/crash/rescue duty, serve as a security guard, remove snow, load and handle munitions, launch/recover and service aircraft, operate heavy equipment, maintain facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. (10%)
Performs other duties as assigned.
PLEASE CONTACT HRO FOR COMPLETE POSITION DESCRIPTION.
Requirements
Conditions of employment
MILITARY REQUIREMENTS: This is an excepted service position that requires membership in a compatible military grade in the Alabama Air National Guard. Applicants who are not currently a member of the Alabama Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Alabama Air National Guard recruiter at (800) 864-6264 prior to applying for this position.
MINIMUM MILITARY RANK: A1C
MAXIMUM MILITARY RANK: TSGT
EXPERIENCE REQUIREMENTS: Each applicant must fully substantiate (in his/her own words) that he/she meets the requirements of the Specialized Experience listed below: Otherwise, the applicant will be considered unqualified for this position. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. DOING SO MAY RESULT IN DISQUALIFICATION FOR THE POSITION.
GENERAL EXPERIENCE: To qualify an applicant for one of the FWS Series 2610 ANG Dual Status Technician positions, apply and evaluate the applicant's competencies, military and civilian experiences, completed education, learned skills, obtained knowledge, endorsed abilities, and training program accomplishments. The following seven basic qualification factors are applicable to the FWS ANG Dual Status Technician positions:
- Skilled in collecting and analyzing data effectively, efficiently, and accurately- Ability to communicate clearly and effectively
- Skilled in duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes
- Ability to format and write English in reports and presentation formats
- Skilled in presenting formal training presentations and briefings
- Skilled in applying procedures and directives by reading and interpreting material
- Skilled in training, mentoring, leading, and problem-solving
SPECIALIZED EXPERIENCE: This position is a journeyman skill level designed as a developmental opportunity to qualify for merit promotion to the dual status technician PD# D2324000, Electronic Integrated Systems Mechanic, WG-2610-13 (Back Shop) craftsman expertise. Must have at least a three-skill level in one of the compatible AFSCs, with 12 months of work experiences, that involved duties such as, inspecting, testing, troubleshooting, repairing and modifying software controlled automated and manually controlled test stations, electronic circuit maintenance pods, peripherals, support equipment and associated subsystems. Knowledgeable of stations that are used to repair and maintain all avionics line-replaceable units and pods. Skilled in analyzing performance, running tests, conducting inspections, troubleshooting, identifying and isolating malfunctions, disassembling, modifying or repairing and reassembling the test stations or electronic circuit maintenance pods and their associated peripherals. Skilled in reading the complex inter-related variables that resulted from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems. Experiences involved analyzing malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings. Skilled in diagnosing circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics. Experienced in isolating problems to the failing part using equipment such as, self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment. Competent in removing and replacing components, assemblies, sub-assemblies, or parts using special and common hand tools, soldering devices and special electronic instruments. Experiences involved modifying and updating avionics pods; or, support equipment and support software according to applicable technical publications. Competent to analyze program data and determined if the criteria are sufficient to provide adequate testing and troubleshooting. Skilled in examining recurring malfunctions and software deficiencies and determined testing voids and initiated corrective action by submitting quality deficiency reports, software deficiency reports, or proposed modifications. Experiences included connecting associated testing equipment to interface the test station system to the aircraft system and pod; facilitated maintenance and repair of pod or line replaceable units from the avionics systems such as radar, fire control, instrument, flight control, inertial FWS navigation, malfunction analysis and recording equipment systems. Competent in determining if failures are caused by the unit under test. Skilled to identify a malfunction and isolated it to the specific component(s). Skilled in the task of disassembling and repairing or replacing solid state devices, micro miniature modules, gyros, sensors, transducers, and any other required parts; followed by the reassembly and performed operational tests. Experiences may have included the identification of test program malfunctions and informing engineers and/or Air Force Logistics Command of the problems. Experienced in the development and/or modification of software, interfaces, extender equipment, or additional items of test equipment or completed work in validating technical data concerning the repair, maintenance, and test of the test station and units under test. Competent in processing and accounting for due-in-from-maintenance supply assets. Skilled in documenting maintenance repair actions and man-hour accounting on maintenance forms and computer systems. Skilled in maintaining historical data of repaired components and of the test stations. Skilled in complying with safety, fire, security, and housekeeping regulations. Experienced in the procedures involved with the proper storage, protection, and maintenance of all work-related material and equipment.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
**This position may be authorized a recruitment or relocation incentive for up to 25%. All incentives must be approved prior to the employee in processing.**
1. Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Installs serviceable components into aircraft and performs total systems alignment and harmonization in accordance with existing technical orders and directives. Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). (25%)
2. Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal. (20%)
3. Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off-equipment maintenance on aircraft avionics such as automatic flight control systems, instrument systems, communication and navigation systems, and inertial navigations systems. Coordinates back shop bench check; completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pitot-static testers, programming units and special purpose test analyzers. (20%)
4. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Documents all discrepancies and maintenance actions performed by inputting information into the electronic records information systems (i.e.: CAMS, IMDS, GO-81, REMIS). Recommends hardware and software changes. Submits change recommendations to Technical Orders. Requisitions supply assets and processes repairable assets in accordance with Standard Base Supply System requirements.(15%)
5. May upload/download chaff/flare dispensers. This hazardous task may involve the inspection, storage and handling of explosive devices; to include flares, chaff, impulse cartridges and similar items. Prepares for and participates in Aerospace Expeditionary Force (AEF) tasking, deployments and various inspections and exercises. Processes and accounts for due-in from maintenance (DIFM) supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification. (10%)
6. May be required to perform additional duties such as structural fire-fighting, aircraft fire/crash/rescue duty, serve as a security guard, remove snow, load and handle munitions, launch/recover and service aircraft, operate heavy equipment, maintain facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. (10%)
Performs other duties as assigned.
PLEASE CONTACT HRO FOR COMPLETE POSITION DESCRIPTION.
Requirements
Conditions of employment
- NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
- This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
- May be required to successfully complete a probationary period.
- Participation in direct deposit is mandatory.
- May occasionally be required to work other than normal duty hours; overtime may be required.
MILITARY REQUIREMENTS: This is an excepted service position that requires membership in a compatible military grade in the Alabama Air National Guard. Applicants who are not currently a member of the Alabama Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Alabama Air National Guard recruiter at (800) 864-6264 prior to applying for this position.
MINIMUM MILITARY RANK: A1C
MAXIMUM MILITARY RANK: TSGT
EXPERIENCE REQUIREMENTS: Each applicant must fully substantiate (in his/her own words) that he/she meets the requirements of the Specialized Experience listed below: Otherwise, the applicant will be considered unqualified for this position. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. DOING SO MAY RESULT IN DISQUALIFICATION FOR THE POSITION.
GENERAL EXPERIENCE: To qualify an applicant for one of the FWS Series 2610 ANG Dual Status Technician positions, apply and evaluate the applicant's competencies, military and civilian experiences, completed education, learned skills, obtained knowledge, endorsed abilities, and training program accomplishments. The following seven basic qualification factors are applicable to the FWS ANG Dual Status Technician positions:
- Skilled in collecting and analyzing data effectively, efficiently, and accurately- Ability to communicate clearly and effectively
- Skilled in duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes
- Ability to format and write English in reports and presentation formats
- Skilled in presenting formal training presentations and briefings
- Skilled in applying procedures and directives by reading and interpreting material
- Skilled in training, mentoring, leading, and problem-solving
SPECIALIZED EXPERIENCE: This position is a journeyman skill level designed as a developmental opportunity to qualify for merit promotion to the dual status technician PD# D2324000, Electronic Integrated Systems Mechanic, WG-2610-13 (Back Shop) craftsman expertise. Must have at least a three-skill level in one of the compatible AFSCs, with 12 months of work experiences, that involved duties such as, inspecting, testing, troubleshooting, repairing and modifying software controlled automated and manually controlled test stations, electronic circuit maintenance pods, peripherals, support equipment and associated subsystems. Knowledgeable of stations that are used to repair and maintain all avionics line-replaceable units and pods. Skilled in analyzing performance, running tests, conducting inspections, troubleshooting, identifying and isolating malfunctions, disassembling, modifying or repairing and reassembling the test stations or electronic circuit maintenance pods and their associated peripherals. Skilled in reading the complex inter-related variables that resulted from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems. Experiences involved analyzing malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings. Skilled in diagnosing circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics. Experienced in isolating problems to the failing part using equipment such as, self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment. Competent in removing and replacing components, assemblies, sub-assemblies, or parts using special and common hand tools, soldering devices and special electronic instruments. Experiences involved modifying and updating avionics pods; or, support equipment and support software according to applicable technical publications. Competent to analyze program data and determined if the criteria are sufficient to provide adequate testing and troubleshooting. Skilled in examining recurring malfunctions and software deficiencies and determined testing voids and initiated corrective action by submitting quality deficiency reports, software deficiency reports, or proposed modifications. Experiences included connecting associated testing equipment to interface the test station system to the aircraft system and pod; facilitated maintenance and repair of pod or line replaceable units from the avionics systems such as radar, fire control, instrument, flight control, inertial FWS navigation, malfunction analysis and recording equipment systems. Competent in determining if failures are caused by the unit under test. Skilled to identify a malfunction and isolated it to the specific component(s). Skilled in the task of disassembling and repairing or replacing solid state devices, micro miniature modules, gyros, sensors, transducers, and any other required parts; followed by the reassembly and performed operational tests. Experiences may have included the identification of test program malfunctions and informing engineers and/or Air Force Logistics Command of the problems. Experienced in the development and/or modification of software, interfaces, extender equipment, or additional items of test equipment or completed work in validating technical data concerning the repair, maintenance, and test of the test station and units under test. Competent in processing and accounting for due-in-from-maintenance supply assets. Skilled in documenting maintenance repair actions and man-hour accounting on maintenance forms and computer systems. Skilled in maintaining historical data of repaired components and of the test stations. Skilled in complying with safety, fire, security, and housekeeping regulations. Experienced in the procedures involved with the proper storage, protection, and maintenance of all work-related material and equipment.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
**This position may be authorized a recruitment or relocation incentive for up to 25%. All incentives must be approved prior to the employee in processing.**
group id: DOAF
