Posted today
Secret
Unspecified
Unspecified
Engineering - Mechanical
Travis AFB, CA (On-Site/Office)
Duties
- Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft altitude control, navigation, and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops and accomplish a number of major functions.
- Sets up and operates software controlled automated test stations to run established and new diagnostic programs in various test modes to test and troubleshoot multi-system complexes.
- Uses and maintains hand and power tools, precision measurement tools, and test equipment, such as O-scopes, pulse generators, power supplies, resistance decades, electrostatic field meters, digital/analog multimeters, precision measurement tools and test equipment, gas leak detectors, resistivity meter, electronic control test set, explosive set circuitry test set, ESD meter, VOM meters, micrometers, torque wrenches, soldering irons, and other trade tools and equipment.
- Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment
- Maintains inspections and maintenance records. Prepares all necessary paperwork and/or makes appropriate entries in computerized maintenance information systems.
Requirements
Conditions of employment
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2600, Electronic Equipment Installation and Maintenance Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of an ELECTRONIC INTEGRATED SYSTEMS MECHANIC without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of electronic theories and practice; of integrated electronic, pneumatic, hydraulic, optical, and mechanical systems; of such applications as radar, digital or analog computers, digital display devices, and of the technology and practices which integrate these components into a total functional system; and of mathematics including algebra and basic trigonometric functions.
2. Knowledge of safety regulations, practices, and procedures.
3. Skill in the set up and operation of computer controlled automated test equipment (ATE) and test stands, oscilloscopes (dual trace, storage, digitized), spectrum, network and distortion analyzers, frequency counters, and signal generators; in interpreting complex drawings, specifications, and schematics of complete multi-system complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multi-system complex; and in troubleshooting, installing, repairing, and maintaining electronic integrated multi-systems where circuit theory must be used to understand the operation of a large number of circuits and functions, and the interaction of subsystems which create malfunctions.
4. Skill in the use of a variety of hand tools such as screwdrivers, drills, wrenches, soldering irons, and microsoldering units.
5. Ability to follow drawings for multi-system complexes of numerous integrated systems; to trace the effect of a change in one subsystem to other integrated subsystems and determine which controls and devices must be changed or adjusted to compensate; and to repair, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems that are extensively interconnected with data feedback loops.
6. Ability to use computer terminals to maintain records and document actions.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
PHYSICAL EFFORT: Light to moderate physical exertion is required in lifting and carrying items weighing from 10 to 40 pounds, and occasional objects weighing in excess of 40 pounds with the help of weight handling equipment or with assistance from other workers. The work requires standing, bending, and stooping for extended periods of time on concrete or composition floors. Climbing and working in high places (towers) may be required.
WORKING CONDITIONS: Employee typically works in well lighted, heated, and ventilated areas. Work is sometimes performed at missile sites, or in aircraft, sometimes outside in inclement weather. Exposed to the possibility of electric shock; burns from electrical or RF energy or hot solder; and cuts and bruises.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
- Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft altitude control, navigation, and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops and accomplish a number of major functions.
- Sets up and operates software controlled automated test stations to run established and new diagnostic programs in various test modes to test and troubleshoot multi-system complexes.
- Uses and maintains hand and power tools, precision measurement tools, and test equipment, such as O-scopes, pulse generators, power supplies, resistance decades, electrostatic field meters, digital/analog multimeters, precision measurement tools and test equipment, gas leak detectors, resistivity meter, electronic control test set, explosive set circuitry test set, ESD meter, VOM meters, micrometers, torque wrenches, soldering irons, and other trade tools and equipment.
- Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment
- Maintains inspections and maintenance records. Prepares all necessary paperwork and/or makes appropriate entries in computerized maintenance information systems.
Requirements
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- This posn is subject to provisions of the DoD Priority Placement Program
- Disclosure of Political Appointments
- Direct Deposit: All federal employees are required to have direct deposit.
- Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period.
- Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
- This position will be open to eligible DoD internal candidates.
- May be required to work rotating shifts or uncommon tours of duty. Subject to call back to meet emergency situations.
- Must be able to obtain a SECRET clearance to perform the work in sensitive areas
- This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing.
- Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
- The physical requirements of this position as determined by the manager are: Light to moderate physical exertion is required in lifting and carrying items weighing from 10 to 40 pounds,
- And occasional objects weighing in excess of 40 pounds with the help of weight handling equipment or with assistance from other workers. The work requires standing, bending, and stooping for extended periods of time on concrete or composition floors.
- Climbing and working in high places (towers) may be required.
- The work requires the employee to drive a motor vehicle. An appropriate, valid driver's license is required for the position.
- Work may occasionally require travel away from the normal duty station on military or commercial aircraft.
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2600, Electronic Equipment Installation and Maintenance Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of an ELECTRONIC INTEGRATED SYSTEMS MECHANIC without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of electronic theories and practice; of integrated electronic, pneumatic, hydraulic, optical, and mechanical systems; of such applications as radar, digital or analog computers, digital display devices, and of the technology and practices which integrate these components into a total functional system; and of mathematics including algebra and basic trigonometric functions.
2. Knowledge of safety regulations, practices, and procedures.
3. Skill in the set up and operation of computer controlled automated test equipment (ATE) and test stands, oscilloscopes (dual trace, storage, digitized), spectrum, network and distortion analyzers, frequency counters, and signal generators; in interpreting complex drawings, specifications, and schematics of complete multi-system complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multi-system complex; and in troubleshooting, installing, repairing, and maintaining electronic integrated multi-systems where circuit theory must be used to understand the operation of a large number of circuits and functions, and the interaction of subsystems which create malfunctions.
4. Skill in the use of a variety of hand tools such as screwdrivers, drills, wrenches, soldering irons, and microsoldering units.
5. Ability to follow drawings for multi-system complexes of numerous integrated systems; to trace the effect of a change in one subsystem to other integrated subsystems and determine which controls and devices must be changed or adjusted to compensate; and to repair, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems that are extensively interconnected with data feedback loops.
6. Ability to use computer terminals to maintain records and document actions.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
PHYSICAL EFFORT: Light to moderate physical exertion is required in lifting and carrying items weighing from 10 to 40 pounds, and occasional objects weighing in excess of 40 pounds with the help of weight handling equipment or with assistance from other workers. The work requires standing, bending, and stooping for extended periods of time on concrete or composition floors. Climbing and working in high places (towers) may be required.
WORKING CONDITIONS: Employee typically works in well lighted, heated, and ventilated areas. Work is sometimes performed at missile sites, or in aircraft, sometimes outside in inclement weather. Exposed to the possibility of electric shock; burns from electrical or RF energy or hot solder; and cuts and bruises.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
group id: DOAF
