Posted today
Secret
Unspecified
Unspecified
Engineering - Mechanical
Andrews AFB, MD (On-Site/Office)
Duties
Help
Apply total engine and aircraft system knowledge when troubleshooting/evaluating propulsion systems performance.
Determine degree of disassembly required to repair or replace defective parts or components, make prescribed modifications and make final adjustments to achieve acceptable propulsion systems operation.
Maintain certification on the completion of tasks requiring the use of various precision test/measurement equipment to include but not limited to Blade Blending, Rigid Borescope, Flexible Borescope w/measuring capabilities and Test Cell Operations.
Enforce and comply with safety practices and procedures following established safety rules and regulations and maintain a safe and clean work area.
Coordinate and certify the work efforts of one to five subordinate technicians and other journey level mechanics. Disconnect/connect propulsion system components from/to engine.
Requirements
Help
Conditions of employment
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standard Handbook Federal Wage System (FWS) for the WG-8800 Aircraft Overhaul Family.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook Federal Wage System (FWS) for the WG-8800 Aircraft Overhaul Family https://www.opm.gov/policy-data-oversight/classification-qualifications/classifying-federal-wage-system-positions/#url=8800 . Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Ability to do the work of an Aircraft Mechanic without more than normal supervision. (Screen Out Element)
2. Knowledge of technical such as but not limited to the installation, operation, and repair of gas turbine or reciprocating aircraft engines and accessory systems and repair and rework engine parts and components and replace accessories such as portions of electrical, pneumatic, and hydraulic systems.
3. Skill in the use of measuring instruments such as vibration analyzers, pyrometers, engine analyzers, engine diagnostic computer systems, data transfer sets, and test benches.
4. Knowledge in the interpretation, certification and use of technical orders, manufacturers' manuals, engine records, maintenance bulletins, and other technical information.
5. Skill in the operation of diagnostic and on-board electronic equipment/systems to identify proper and improper operation of aircraft systems, components and parts.
6. Ability to troubleshoot engine malfunctions, interpret trouble reports or observed instrument readings, appearances, etc., make a tentative diagnosis; select needed tools and test equipment; and disassemble the engine or accessory system to locate the defect.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
FUNCTIONAL REQUIREMENTS:
Work requires moderate to strenuous effort. Must stand, stoop, bend, and reach for extended periods of time. Frequently handles items weighing up to 20 pounds, and often lift and carry assemblies weighing up to 50 pounds. Hoists, hand trucks, lifts, and other employees are available to assist when handling heavy or awkward items. May be required to climb steps and ladders and stand on slippery or inclined surfaces.
ENVIRONMENTAL FACTORS:
Work is performed in hanger areas, outdoors, in parked aircraft, and sometimes in hazardous noise areas. Exposed to extremes in heat, cold, humidity and inclement weather. Must work in confined areas and in awkward positions. Exposed to dirt, grease, and aircraft fluids, oil, hydraulic fluid, solvents, and hazardous fluids and gases such as Hydrazine and Halon. Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces. Slippery or uneven walking surfaces. Working around machinery with moving parts. Working around moving objects or vehicles. May be exposed to intake suction and hot exhaust blast. Working closely with others. Working alone.
Additional information
Testing Designated Position (TDP): This position is designated as Testing Designated Position (TDP) under the Air Force Civilian Drug Testing Program. As a mandatory requirement for employment, the incumbent is to refrain from the use of illegal drugs and if requested, submit to urinalysis testing. Appointee must sign a statement acknowledging the position occupied is a TDP.
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here .
If you have questions regarding this announcement and have hearing or speech difficulties click here .
Help
Apply total engine and aircraft system knowledge when troubleshooting/evaluating propulsion systems performance.
Determine degree of disassembly required to repair or replace defective parts or components, make prescribed modifications and make final adjustments to achieve acceptable propulsion systems operation.
Maintain certification on the completion of tasks requiring the use of various precision test/measurement equipment to include but not limited to Blade Blending, Rigid Borescope, Flexible Borescope w/measuring capabilities and Test Cell Operations.
Enforce and comply with safety practices and procedures following established safety rules and regulations and maintain a safe and clean work area.
Coordinate and certify the work efforts of one to five subordinate technicians and other journey level mechanics. Disconnect/connect propulsion system components from/to engine.
Requirements
Help
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- AFSC: 2A6X1C
- Must be able to obtain and retain a secret security clearance.
- This position is subject to provisions of the DoD Priority Placement Program
- Travel and relocation expenses will not be paid
- May be required to fly in commercial and military aircraft to perform temporary/permanent duty assignments and or to support Air Expeditionary Force (AEF) contingencies.
- May be required to work overtime to meet workload demands. Performs uncommon tours of duty.
- May be required to obtain special certification training (i.e., Red X, engine run, etc.).
- Disclosure of Political Appointments is required
- Must be a current member of the AF Reserve or willing/qualified to join
- May be required to work overtime to meet workload demands. May be subject to shift work and uncommon tours of duty.
- May be required to drive a motor vehicle. An appropriate, valid driver's license may be required.
- Direct Deposit: All federal employees are required to have direct deposit.
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standard Handbook Federal Wage System (FWS) for the WG-8800 Aircraft Overhaul Family.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook Federal Wage System (FWS) for the WG-8800 Aircraft Overhaul Family https://www.opm.gov/policy-data-oversight/classification-qualifications/classifying-federal-wage-system-positions/#url=8800 . Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Ability to do the work of an Aircraft Mechanic without more than normal supervision. (Screen Out Element)
2. Knowledge of technical such as but not limited to the installation, operation, and repair of gas turbine or reciprocating aircraft engines and accessory systems and repair and rework engine parts and components and replace accessories such as portions of electrical, pneumatic, and hydraulic systems.
3. Skill in the use of measuring instruments such as vibration analyzers, pyrometers, engine analyzers, engine diagnostic computer systems, data transfer sets, and test benches.
4. Knowledge in the interpretation, certification and use of technical orders, manufacturers' manuals, engine records, maintenance bulletins, and other technical information.
5. Skill in the operation of diagnostic and on-board electronic equipment/systems to identify proper and improper operation of aircraft systems, components and parts.
6. Ability to troubleshoot engine malfunctions, interpret trouble reports or observed instrument readings, appearances, etc., make a tentative diagnosis; select needed tools and test equipment; and disassemble the engine or accessory system to locate the defect.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
FUNCTIONAL REQUIREMENTS:
Work requires moderate to strenuous effort. Must stand, stoop, bend, and reach for extended periods of time. Frequently handles items weighing up to 20 pounds, and often lift and carry assemblies weighing up to 50 pounds. Hoists, hand trucks, lifts, and other employees are available to assist when handling heavy or awkward items. May be required to climb steps and ladders and stand on slippery or inclined surfaces.
ENVIRONMENTAL FACTORS:
Work is performed in hanger areas, outdoors, in parked aircraft, and sometimes in hazardous noise areas. Exposed to extremes in heat, cold, humidity and inclement weather. Must work in confined areas and in awkward positions. Exposed to dirt, grease, and aircraft fluids, oil, hydraulic fluid, solvents, and hazardous fluids and gases such as Hydrazine and Halon. Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces. Slippery or uneven walking surfaces. Working around machinery with moving parts. Working around moving objects or vehicles. May be exposed to intake suction and hot exhaust blast. Working closely with others. Working alone.
Additional information
Testing Designated Position (TDP): This position is designated as Testing Designated Position (TDP) under the Air Force Civilian Drug Testing Program. As a mandatory requirement for employment, the incumbent is to refrain from the use of illegal drugs and if requested, submit to urinalysis testing. Appointee must sign a statement acknowledging the position occupied is a TDP.
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here .
If you have questions regarding this announcement and have hearing or speech difficulties click here .
group id: DODAF
