Posted today
Secret
Unspecified
Unspecified
Engineering - Systems
Sioux Falls, SD (On-Site/Office)
Duties
As a GENERAL ENGINEER, GS-0801-12, you will:
This is an interdisciplinary architect or engineer position. The nature of the work is common to the architecture or several engineering disciplines. The duties assigned to this position can be classified in either of the following architecture or engineering occupational series: General Engineering, GS-801 (this includes Architectural and Construction Engineering); Architecture, GS-808; Civil Engineering, GS-810; Environmental Engineering, GS-819; Mechanical Engineering, GS-830; Electrical Engineering, GS-850. The position may be filled with an incumbent qualified in any of the above occupational series. The position will be classified to the occupational series of the incumbent selected at the time that the position is filled.
This position is located in the ANG Base Engineering Division. May assume the duties of the Base Architect/ Engineer in his/her absence. Provides supervisory and technical assistance to the Base Architect/Engineer in overseeing and managing the engineering shops and production control function. Provides technical support to all assigned sections. Provides guidance to these sections on standard and code requirements. Develops engineered solutions to technical problems, which are incapable of being resolved by subordinates. Typical problems require the need to perform extensive mathematical and technical calculations in engineering to include civil, mechanical, electrical, or general engineering as well as architecture. This position requires military membership. It is designated for National Guard officer incumbency only. The incumbent provides subordinate guidance and team leadership to Non-Dual Status and Dual Status employees. Incumbent performs planning development necessary to accomplish architecture and engineering functions for programs essential to state Air National Guard daily operations, training, and readiness missions. Fosters an environment conducive to teaming among service providers and customers to meet state Air National Guard requirements
Requirements
Conditions of employment
NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
MILITARY REQUIREMENTS: Officer, up to MAJ are eligible to apply. Selected individual must be assigned to a compatible military AFSC. Aptitude scores can be checked on the vMPF or at the Customer Service in the Force Support Squadron and physical profile in the medical squadron. Military grade inversion within the full-time work force is not permitted. The military grade of the full time supervisor must equal or exceed the military grade of personnel supervised.
BASIC REQUIREMENTS for Architecture Positions :
A.. Degree: architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in paragraph A. The curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities. The courses required for a degree in architecture generally place emphasis upon planning, esthetics, and materials and methods of construction, while the courses for an architectural engineering degree place equal or greater weight on the technical engineering aspects such as structural systems, mechanical systems, and the properties of materials. Because of this difference in emphasis, persons with degrees in architecture may have a preference for work assignments that offer greater opportunities for them to express their artistic and creative abilities. As a result, they may be more concerned with planning and design aspects of architecture, and persons with degrees in architectural engineering may be more engaged in aspects emphasizing technical engineering considerations. Experience: An applicant lacking a degree in architecture must have had l year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of college courses, 5 years of such experience is required. This experience must have demonstrated that the applicant has acquired a thorough knowledge of the fundamental principles and theories of professional architecture.
BASIC REQUIREMENT for Engineer Positions:
A. Bachelor's degree (or higher degree) in Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.
SPECIALIZED EXPERIENCE : GS-12 Level - MUST possess at least one year of experience equivalent to the lower grade level. Experience that equipped the applicant with the particular knowledge, skills, and abilities to perform successfully the duties of the position, and that is typically in or related to the work of the position to be filled. To be creditable, specialized experience must have been equivalent to at least the next lower grade level in the normal line of progression for the occupation in the organization.
Knowledge, Skill, and Abilities (KSAs): Applicants are encouraged to submit a separate sheet(s) addressing the Knowledge, Skills and Abilities (KSAs) and how they relate to work experience, education or training.
BENEFITS:
The federal government offers a number of exceptional benefits to its employees which may include Flexible Spending Accounts, Health Insurance, Annual Leave, Life Insurance, Long Term Care Insurance, and Retirement Program. For additional information about current federal benefits visit web site http://www.opm.gov
Military Technicians are ineligible for military enlistment, retention, and student loan repayment bonuses. Acceptance of a Technician position over 180 days will result in suspension or termination of these military incentives. It is the applicant's responsibility to contact the South Dakota Air National Guard Education Services Office for more information regarding military enlistment, retention and student loan repayment incentives.
Equal Employment:
The South Dakota National Guard is an equal opportunity employer and cannot discriminate against an employee or applicant with respect to the terms, conditions or privileges of employment on the basis of race, color, religion, sex, sexual harassment, sexual orientation, national origin, age, disability (including pregnancy), marital status or political affiliation. Applicants or employees may contact the South Dakota National Guard Equal Employment Office at 605-737-6635 if they believe they have been the victim of unlawful discrimination.
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
As a GENERAL ENGINEER, GS-0801-12, you will:
This is an interdisciplinary architect or engineer position. The nature of the work is common to the architecture or several engineering disciplines. The duties assigned to this position can be classified in either of the following architecture or engineering occupational series: General Engineering, GS-801 (this includes Architectural and Construction Engineering); Architecture, GS-808; Civil Engineering, GS-810; Environmental Engineering, GS-819; Mechanical Engineering, GS-830; Electrical Engineering, GS-850. The position may be filled with an incumbent qualified in any of the above occupational series. The position will be classified to the occupational series of the incumbent selected at the time that the position is filled.
This position is located in the ANG Base Engineering Division. May assume the duties of the Base Architect/ Engineer in his/her absence. Provides supervisory and technical assistance to the Base Architect/Engineer in overseeing and managing the engineering shops and production control function. Provides technical support to all assigned sections. Provides guidance to these sections on standard and code requirements. Develops engineered solutions to technical problems, which are incapable of being resolved by subordinates. Typical problems require the need to perform extensive mathematical and technical calculations in engineering to include civil, mechanical, electrical, or general engineering as well as architecture. This position requires military membership. It is designated for National Guard officer incumbency only. The incumbent provides subordinate guidance and team leadership to Non-Dual Status and Dual Status employees. Incumbent performs planning development necessary to accomplish architecture and engineering functions for programs essential to state Air National Guard daily operations, training, and readiness missions. Fosters an environment conducive to teaming among service providers and customers to meet state Air National Guard requirements
Requirements
Conditions of employment
- National Guard Membership is required.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a trial period.
- Participation in direct deposit is mandatory.
NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
MILITARY REQUIREMENTS: Officer, up to MAJ are eligible to apply. Selected individual must be assigned to a compatible military AFSC. Aptitude scores can be checked on the vMPF or at the Customer Service in the Force Support Squadron and physical profile in the medical squadron. Military grade inversion within the full-time work force is not permitted. The military grade of the full time supervisor must equal or exceed the military grade of personnel supervised.
BASIC REQUIREMENTS for Architecture Positions :
A.. Degree: architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following:
BASIC REQUIREMENT for Engineer Positions:
A. Bachelor's degree (or higher degree) in Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.
SPECIALIZED EXPERIENCE : GS-12 Level - MUST possess at least one year of experience equivalent to the lower grade level. Experience that equipped the applicant with the particular knowledge, skills, and abilities to perform successfully the duties of the position, and that is typically in or related to the work of the position to be filled. To be creditable, specialized experience must have been equivalent to at least the next lower grade level in the normal line of progression for the occupation in the organization.
Knowledge, Skill, and Abilities (KSAs): Applicants are encouraged to submit a separate sheet(s) addressing the Knowledge, Skills and Abilities (KSAs) and how they relate to work experience, education or training.
- Knowledge to utilize program and planning documents in determining real property facility requirements for programmed units and activities within the installation.
- Skill to represent the Base Architect/Engineer at meetings and conferences with HQ ANG and intermediate command staff, Commanders and staff representatives of tenant organizations.
- Knowledge to determine operational trends and forecasts requirements.
- Skill to provide technical instructions and information on architectural, engineering and other technical requirements and assigns phases of projects to subordinate architects, engineers, engineering technicians, and draftsmen.
BENEFITS:
The federal government offers a number of exceptional benefits to its employees which may include Flexible Spending Accounts, Health Insurance, Annual Leave, Life Insurance, Long Term Care Insurance, and Retirement Program. For additional information about current federal benefits visit web site http://www.opm.gov
Military Technicians are ineligible for military enlistment, retention, and student loan repayment bonuses. Acceptance of a Technician position over 180 days will result in suspension or termination of these military incentives. It is the applicant's responsibility to contact the South Dakota Air National Guard Education Services Office for more information regarding military enlistment, retention and student loan repayment incentives.
Equal Employment:
The South Dakota National Guard is an equal opportunity employer and cannot discriminate against an employee or applicant with respect to the terms, conditions or privileges of employment on the basis of race, color, religion, sex, sexual harassment, sexual orientation, national origin, age, disability (including pregnancy), marital status or political affiliation. Applicants or employees may contact the South Dakota National Guard Equal Employment Office at 605-737-6635 if they believe they have been the victim of unlawful discrimination.
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
group id: DOAF
