Posted today
Secret
Unspecified
Unspecified
Cherry Point, NC (On-Site/Office)
Duties
Help
Requirements
Help
Conditions of employment
Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.
Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below.
WG-08
This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: 1.) Work from drawings, manuals, technical directives, instructions, and at times, under guidance of a higher graded Painter. 2.) Prepare aircraft, engines, ground support equipment and components for finish. 3.) Prepare aircraft, engines, ground support equipment and components for finish using various chemicals, detergents, and solvents in conjunction with high pressure steam and water. 4.) Perform, by detailed instructions, strip operations such as, chemical, and plastic media blasting, masking, applying chemical conversion to bare substrates, identifying various types of corrosion and treat in accordance with technical information. 5.) Mix and apply various paints/proper finishes to process aircraft, aircraft engine structures, components, assemblies, and/or subassemblies. I work under close supervision of a work leader or journey-level employee who observes tasks in progress and upon completion to make sure they are properly performed.
WG-05
This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: 1.) Work from drawings, manuals, technical directives, instructions, and at times, under guidance of a higher graded Painter. 2.) Assist in preparing aircraft, engines, ground support equipment and components for finish. 3.) Prepare aircraft, engines, ground support equipment and components for finish using various chemicals, detergents, and solvents in conjunction with high pressure steam and water. 4.) Identify various types of corrosion and treat in accordance with technical information. 5.) Mix and apply various paints/proper finishes to process aircraft, aircraft engine structures, components, assemblies, and/or subassemblies. I work under close supervision of a work leader or journey-level employee who observes tasks in progress and upon completion to make sure they are properly performed.
Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
This job does not have an education qualification requirement.
Additional information
This position is covered by the Department of Defense Priority Placement Program.
Several vacancies may be filled.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf .
Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.
Help
- You will restore existing coating systems on the entire aircraft, weapons systems, engine, dynamic components, major components and GSE.
- You will prepare surfaces for coatings using abrading, washing, cleaning, chemical treating, hand washing, and polishing solvents to ensure proper cleanliness and surface finish of all systems and components
- You will mask and protect surfaces not to be painted using masking tape, discs, fixtures and a variety of blank off, plugs and caps
- You will read proprietary, and legacy specifications, blueprints, technical directives, electronic and paper manuals
- You will work from drawings, manuals, technical directives, instructions
- You will prepare aircraft, engines, ground support equipment and components for finish using various chemicals, detergents and solvents in conjunction with high pressure steam and water.
Requirements
Help
Conditions of employment
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to successfully complete a pre-appointment physical examination.
- This is a bargaining unit position.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.
Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below.
WG-08
This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: 1.) Work from drawings, manuals, technical directives, instructions, and at times, under guidance of a higher graded Painter. 2.) Prepare aircraft, engines, ground support equipment and components for finish. 3.) Prepare aircraft, engines, ground support equipment and components for finish using various chemicals, detergents, and solvents in conjunction with high pressure steam and water. 4.) Perform, by detailed instructions, strip operations such as, chemical, and plastic media blasting, masking, applying chemical conversion to bare substrates, identifying various types of corrosion and treat in accordance with technical information. 5.) Mix and apply various paints/proper finishes to process aircraft, aircraft engine structures, components, assemblies, and/or subassemblies. I work under close supervision of a work leader or journey-level employee who observes tasks in progress and upon completion to make sure they are properly performed.
WG-05
This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: 1.) Work from drawings, manuals, technical directives, instructions, and at times, under guidance of a higher graded Painter. 2.) Assist in preparing aircraft, engines, ground support equipment and components for finish. 3.) Prepare aircraft, engines, ground support equipment and components for finish using various chemicals, detergents, and solvents in conjunction with high pressure steam and water. 4.) Identify various types of corrosion and treat in accordance with technical information. 5.) Mix and apply various paints/proper finishes to process aircraft, aircraft engine structures, components, assemblies, and/or subassemblies. I work under close supervision of a work leader or journey-level employee who observes tasks in progress and upon completion to make sure they are properly performed.
Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
This job does not have an education qualification requirement.
Additional information
This position is covered by the Department of Defense Priority Placement Program.
Several vacancies may be filled.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf .
Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.
group id: DODAF
