Posted today
Top Secret
Unspecified
Unspecified
naval air station patuxent river, MD (On-Site/Office)
Duties
Requirements
Conditions of employment
Qualifications
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Candidates will not be hired based on their race, sex, color, religion, or national origin.
To meet the minimum qualification requirements for this position, your resume must show that you possess the Technical Qualifications (TQ) related to this position - NOT TO EXCEED 2 PAGES. Resumes over the 2-page limit will be disqualified. Your resume should include examples of experience, education, and accomplishments applicable to the qualification(s). If your resume does not reflect demonstrated evidence of these qualifications, you may not receive consideration for the position.
TECHNICAL QUALIFICATIONS (TQs): Your resume should demonstrate accomplishments that would satisfy the technical qualifications.
TQ #1. Subject Matter Expertise in Air Systems Flight Controls / Vehicle Management Systems (VMS).
TQ #2. Demonstrated technical expertise in applying DoD acquisition policy and strategy to the RDT&E of Air Systems Flight Controls and Vehicle Management Systems (VMS).
Additional qualification information can be found from the following Office of Personnel Management website:
AND
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
For Professional Engineering Series:
A. Degree: Engineering. Successful completion of a bachelor's or higher engineering degree from an accredited college or university. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
-or-
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
(I) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; or
(II) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or
(III) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; or
(IV) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
An advanced degree of Master's or Ph.D. in one of the educational fields listed above is highly desirable.
Additional information
Senior Scientific Technical Manager (SSTM) positions are positions which exceed the DP-05 (GS-15 equivalent). SSTMs provide a continuity of technical leadership and oversight that is needed to ensure long term stewardship of an organization's technical capabilities. Typically, applicants for SSTM positions are expected to have a graduate degree, significant research or development experience, and a national or international reputation in his/her field and are recognized throughout the applicable community as a renowned expert. SSTM positions are in the competitive service.
This position is not covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at:
There are three key documents that contain important information about your rights and obligations. Please read and retain these documents:
Employment Information Resources - Resource Center:
Males born after 12-31-1959 must be registered or exempt from Selective Service (see )
- You will serve as technical expert for Flight Controls/Vehicle Management Systems technologies to include aerodynamics, vehicle command and control, modeling/simulation system, redundancy management, and system performance.
- You will provide technical leadership for the development with focus of integrating technologies into new and existing designs.
- You will oversee execution of technical projects to ensure compliance with customer requirements, engineering standards, airworthiness requirements, and environmental policies.
- You will provide senior technical consultation and expertise to NAWCAD-AD and NAVAIR leadership as well as to ONR, DARPA, PEOs, SYSCOMS and the Navy.
- You will guide the future direction of air vehicle engineering research and development to respond to future requirements.
- You will provide senior technical consultation and expertise to NAWCAD-AD and NAVAIR leadership as well as to ONR, DARPA, PEOs, SYSCOMS and the Navy.
Requirements
Conditions of employment
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
- You will be required to obtain and maintain an interim and/or final TOP SECRET security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
- This position is a designated Critical Acquisition Position (CAP). You must sign a three-year tenure agreement prior to assuming the position unless a tenure waiver is approved.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
Qualifications
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Candidates will not be hired based on their race, sex, color, religion, or national origin.
To meet the minimum qualification requirements for this position, your resume must show that you possess the Technical Qualifications (TQ) related to this position - NOT TO EXCEED 2 PAGES. Resumes over the 2-page limit will be disqualified. Your resume should include examples of experience, education, and accomplishments applicable to the qualification(s). If your resume does not reflect demonstrated evidence of these qualifications, you may not receive consideration for the position.
TECHNICAL QUALIFICATIONS (TQs): Your resume should demonstrate accomplishments that would satisfy the technical qualifications.
TQ #1. Subject Matter Expertise in Air Systems Flight Controls / Vehicle Management Systems (VMS).
TQ #2. Demonstrated technical expertise in applying DoD acquisition policy and strategy to the RDT&E of Air Systems Flight Controls and Vehicle Management Systems (VMS).
Additional qualification information can be found from the following Office of Personnel Management website:
AND
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
For Professional Engineering Series:
A. Degree: Engineering. Successful completion of a bachelor's or higher engineering degree from an accredited college or university. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
-or-
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
(I) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; or
(II) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or
(III) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; or
(IV) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
An advanced degree of Master's or Ph.D. in one of the educational fields listed above is highly desirable.
Additional information
Senior Scientific Technical Manager (SSTM) positions are positions which exceed the DP-05 (GS-15 equivalent). SSTMs provide a continuity of technical leadership and oversight that is needed to ensure long term stewardship of an organization's technical capabilities. Typically, applicants for SSTM positions are expected to have a graduate degree, significant research or development experience, and a national or international reputation in his/her field and are recognized throughout the applicable community as a renowned expert. SSTM positions are in the competitive service.
This position is not covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at:
There are three key documents that contain important information about your rights and obligations. Please read and retain these documents:
- , for those who undergo an FBI fingerprint-based criminal history record check for personnel vetting, which includes Rap Back,
- (this is the same statement used when your fingerprints are submitted as part of your background investigation), and
- , (applicable to those who hold a sensitive position or have eligibility for access to classified information)"
Employment Information Resources - Resource Center:
Males born after 12-31-1959 must be registered or exempt from Selective Service (see )
group id: DON
