Posted today
Secret
Unspecified
Unspecified
Construction/Facilities
UT (On-Site/Office)
Duties
-Plan and lay out work from blueprints, sketches, drawings, specifications, guides, codes, and work orders, in the installation maintenance, and repair of IPE/RPIE equipment and facilities.
-Perform tasks of various skills that include electrical, mechanical and pipefitting repairs. Install and assemble piping, fittings, and accessories/components to high-and-low pressure liquid lines, vacuum lines, heat exchangers, hydraulic lines, heating and cooling coils and numerous other high/low pressure systems.
-Perform mechanical installation, maintenance, and repair of IPE/RPIE equipment. Use and assure proper fit of required safety equipment and clothing. Maintain bench stock levels of parts, materials, tools, and equipment at prescribed levels.
Requirements
Conditions of employment
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-4700 General Maintenance and Operations Work Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of the position without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
-Knowledge of Equipment Assembly, Installation, Repair, etc.
-Technical Practices (theoretical, precise, artistic)
-Use of Measuring Instruments
-Ability To Interpret Instructions, Specification, etc. (includes blueprinting reading)
-Ability To Use and Maintain Tools and Equipment
-Knowledge of Materials
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
PHYSICAL DEMANDS: The work requires considerable bending, kneeling, standing, and stooping. On-Site work typically requires crawling, climbing on ladders, scaffolds, and rooftops. Work encompasses strenuous physical exertion when bending and shaping the more complex items in handling larger and bulkier material. Requires physical effort which includes prolonged standing on production lines; climbing up and down ladders and scaffolds; working cramped and awkward positions while installing items; and reaching, lifting, and bending while using hand and powered tools in uncomfortable positions while installing items; and reaching, lifting, and bending while using hand and powered tools in uncomfortable positions for extended periods. Is frequently required to perform heavy lifting/carrying, 25 pounds and over, with assistance.
WORK ENVIRONMENT: The employee works indoors and outdoors on elevated structures, and in cramped areas. Subject to discomfort from face masks or other protective devices when there is a possibility of exposure to chemicals, heat, steam, noise, noxious gases, fumes, or acids. Occasionally works outside on top of building, in drafty attic spaces, and in cramped areas with low overheads. Subject to possible burns, electrical shocks, cuts, strains, bruises, and chemical irritations. To reduce dangers from these and other similar conditions, follows prescribed safety practices and use safety equipment such as safety glasses, hard-toe shoes, respirators, hard hats, and fire-retardant gloves.
Education
This job does not have an education qualification requirement.
Additional information
Hill Air Force Base provides worldwide engineering and logistics management for the F-16 Fighting Falcon, A-10 Thunderbolt II, and the Minuteman III ICBM, and performs depot maintenance of the F-16, A-10, and C-130 Hercules aircraft. The base is located between Ogden and Salt Lake City. The area is known for year round activities, including skiing, hiking, boating, extreme sports, fishing and hunting, with four distinct seasons, low humidity and moderate snow fall in the valley.
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Direct Deposit: All federal employees are required to have direct deposit.
Incentives: Recruitment and/or retention incentives may or may not be used.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
-Plan and lay out work from blueprints, sketches, drawings, specifications, guides, codes, and work orders, in the installation maintenance, and repair of IPE/RPIE equipment and facilities.
-Perform tasks of various skills that include electrical, mechanical and pipefitting repairs. Install and assemble piping, fittings, and accessories/components to high-and-low pressure liquid lines, vacuum lines, heat exchangers, hydraulic lines, heating and cooling coils and numerous other high/low pressure systems.
-Perform mechanical installation, maintenance, and repair of IPE/RPIE equipment. Use and assure proper fit of required safety equipment and clothing. Maintain bench stock levels of parts, materials, tools, and equipment at prescribed levels.
Requirements
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- Selectee is expected to be granted with and/or maintain the appropriate security clearance required for the position.
- If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
- Recruitment incentives may be authorized
- This posn is subject to provisions of the DoD Priority Placement Program
- This position may require drug testing and the candidate may be subject to passing a drug test upon selection.
- Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
- Shift work and emergency overtime may be required
- Employee must maintain current certifications
- Disclosure of Political Appointments
- A pre-employment physical examination will be required.
- Selectee may be required to serve a probationary or trial period
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-4700 General Maintenance and Operations Work Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of the position without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
-Knowledge of Equipment Assembly, Installation, Repair, etc.
-Technical Practices (theoretical, precise, artistic)
-Use of Measuring Instruments
-Ability To Interpret Instructions, Specification, etc. (includes blueprinting reading)
-Ability To Use and Maintain Tools and Equipment
-Knowledge of Materials
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
PHYSICAL DEMANDS: The work requires considerable bending, kneeling, standing, and stooping. On-Site work typically requires crawling, climbing on ladders, scaffolds, and rooftops. Work encompasses strenuous physical exertion when bending and shaping the more complex items in handling larger and bulkier material. Requires physical effort which includes prolonged standing on production lines; climbing up and down ladders and scaffolds; working cramped and awkward positions while installing items; and reaching, lifting, and bending while using hand and powered tools in uncomfortable positions while installing items; and reaching, lifting, and bending while using hand and powered tools in uncomfortable positions for extended periods. Is frequently required to perform heavy lifting/carrying, 25 pounds and over, with assistance.
WORK ENVIRONMENT: The employee works indoors and outdoors on elevated structures, and in cramped areas. Subject to discomfort from face masks or other protective devices when there is a possibility of exposure to chemicals, heat, steam, noise, noxious gases, fumes, or acids. Occasionally works outside on top of building, in drafty attic spaces, and in cramped areas with low overheads. Subject to possible burns, electrical shocks, cuts, strains, bruises, and chemical irritations. To reduce dangers from these and other similar conditions, follows prescribed safety practices and use safety equipment such as safety glasses, hard-toe shoes, respirators, hard hats, and fire-retardant gloves.
Education
This job does not have an education qualification requirement.
Additional information
Hill Air Force Base provides worldwide engineering and logistics management for the F-16 Fighting Falcon, A-10 Thunderbolt II, and the Minuteman III ICBM, and performs depot maintenance of the F-16, A-10, and C-130 Hercules aircraft. The base is located between Ogden and Salt Lake City. The area is known for year round activities, including skiing, hiking, boating, extreme sports, fishing and hunting, with four distinct seasons, low humidity and moderate snow fall in the valley.
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Direct Deposit: All federal employees are required to have direct deposit.
Incentives: Recruitment and/or retention incentives may or may not be used.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
group id: DOAF
