Posted 5 days ago
Top Secret
Unspecified
Unspecified
Andrews AFB, MD (On-Site/Office)
Duties
Conditions of employment
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2600 Electronic Equipment Installation and Maintenance Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of an ELECTRONIC EQUIPMENT MAKER, INSTALLER, & REPAIRER SUPERVISOR without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of a wide range of principles, processes, and techniques of trade(s) and/or craft(s) supervised and personnel management policies, practices, and procedures, including sexual harassment and Equal Employment Opportunity/ Equal Employment Treatment.
2. Expert knowledge of safety regulations, practices, and procedures.
3. Expert in technologies including high frequency radio communications systems, ultrahigh frequency and line-of site satellite communications systems, antenna systems including transmission theory, telephone systems, radio frequency propagation, and cryptographies systems. Expert in lightning protection, grounding, bonding shielding of electronic systems and networks. Knowledge of the use and maintenance of hand and power tools, equipment, and precision measuring and/or test equipment common to trades supervised.
4. Ability to read and interpret blueprints, diagrams, sketches, and technical specifications. Knowledge of MIL STD 124B, Grounding, Bonding. And Shielding for Common Long Haul/Tactical Communication Systems including Ground Based Communications-Electronics Facilities and Equipment and MIL HDBK 419A, Grounding, Bonding, and Shielding for Electronic Equipment and Facilities.
5. Ability to plan and organize work assignments to include determining resources required to accomplish mission.
6. Ability to communicate effectively, both orally and in writing.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
- Performs work planning responsibilities.
- Performs work direction responsibilities.
- Reviews all projects assigned to the unit for engineering and technical adherence to standards.
- Performs administration responsibilities.
- Ensures education in, compliance with, and practice of security directives, good safety, and health habits in all work areas.
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- This posn is subject to provisions of the DoD Priority Placement Program
- Disclosure of Political Appointments
- Leave accrual may be authorized upon request
- Direct Deposit: All federal employees are required to have direct deposit.
- May include incentive for superior qualification consideration.
- The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required for the position.
- The work may require occasional travel away from duty location to perform mission essential tasks, attend maintenance seminars, training or provide maintenance assistance to supported organizations.
- A bachelor's degree in an electronics technical field with five years specialized experience or 10 years equivalent experience is desirable.
- Employee must be able to attain and maintain a Top Secret/ Specialized Compartmental Information (TS/SCI) security clearance.
- This is a Mission-Essential position performing a Mission-Critical-Function which must continue uninterrupted after the occurrence of an emergency and continued through full resumption of all functions.
- The duty of this position meets all requirements as a category 4 designation and shall not be vacated during a national emergency
- or mobilization without seriously impairing the capability of the parent Federal Agency or office to function effectively.
- This position must be removed from the Ready Reserve and CAN NOT become a member of the Ready Reserve. (IAW: DoDD 1200.7, "Screening the Ready Reserve,")
- This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing.
- Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2600 Electronic Equipment Installation and Maintenance Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of an ELECTRONIC EQUIPMENT MAKER, INSTALLER, & REPAIRER SUPERVISOR without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of a wide range of principles, processes, and techniques of trade(s) and/or craft(s) supervised and personnel management policies, practices, and procedures, including sexual harassment and Equal Employment Opportunity/ Equal Employment Treatment.
2. Expert knowledge of safety regulations, practices, and procedures.
3. Expert in technologies including high frequency radio communications systems, ultrahigh frequency and line-of site satellite communications systems, antenna systems including transmission theory, telephone systems, radio frequency propagation, and cryptographies systems. Expert in lightning protection, grounding, bonding shielding of electronic systems and networks. Knowledge of the use and maintenance of hand and power tools, equipment, and precision measuring and/or test equipment common to trades supervised.
4. Ability to read and interpret blueprints, diagrams, sketches, and technical specifications. Knowledge of MIL STD 124B, Grounding, Bonding. And Shielding for Common Long Haul/Tactical Communication Systems including Ground Based Communications-Electronics Facilities and Equipment and MIL HDBK 419A, Grounding, Bonding, and Shielding for Electronic Equipment and Facilities.
5. Ability to plan and organize work assignments to include determining resources required to accomplish mission.
6. Ability to communicate effectively, both orally and in writing.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
group id: DOAF
