Posted today
Secret
Unspecified
Unspecified
Engineering - Mechanical
Martinsburg, WV (On-Site/Office)
Duties
Position Description # D1635000
This position is located in an Air National Guard Aviation Wing, Maintenance Group, Maintenance Squadron, Propulsion Element, (Jet Engine Intermediate Maintenance, (JEIM) and the Hush House). The primary purpose of this position is to certify acceptable performance, test, repair, trouble-shoot, operationally check and modify aircraft turbine and auxiliary power units, and associated propulsion system components. Performs other duties as assigned.
Major Duties:
(1) Troubleshoots malfunctioning engines and interrelated propulsion system components, determines degree of disassembly or certification required, repairs or replaces defective components, diagnostic computers and associated hardware.
(2) Troubleshoots, modifies, repairs, and performs sequential disassembly and assembly of gearboxes and auxiliary power units.
(3) Performs scheduled and special evaluations on installed engines, auxiliary power units, and associated airframe-mounted systems.
(4) Performs command directed and locally established in-progress inspections (IPI) (certifying acceptable performance of all conventional or modified aircraft engines prior to their being installed in the aircraft or placed in inventory) of propulsion system components and associated equipment to determine adequacy of workmanship, materials and maintenance.
(5) Requisitions, processes, and accounts for supply assets as required by the repairable processing system. Verifies compatibility of engine components.
(6) Provides technical advice and troubleshooting expertise to other work centers when propulsion systems affect or are affected by interrelated aircraft systems, such as: electro-environmental, pneudraulic, fuel and avionics systems.
(7) Provides on-the-job training to lower graded personnel or newly assigned personnel regardless of grade. Trains lower graded employees on proper certification techniques of installed engine components. Provides instruction in repair and inspection techniques of aircraft engine components and related equipment.
(8) Examines recurring malfunctions and initiates corrective actions by submission of quality deficiency or software deficiency reports. Devises repair procedures based on findings and recommends program changes or data corrections to correct software or technical data deficiencies.
(9) Serves as the hazardous materials manager as required. Interprets and follows state and federal regulations regarding the reclamation, storage and transportation of hazardous materials.
(10) Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections (ORI), Inspector General (IG) Inspections, Unit Effectiveness Inspections and mobility and command support exercises.
(11) Performs other duties as assigned.
Requirements
Conditions of employment
MINIMUM MILITARY GRADE: E3 MAXIMUM MILITARY GRADE : E6
Your rank MUST be included somewhere within your resume.
You must fully substantiate in your own words that you meet the requirements listed below. When explaining minimum requirements and specialized experience you must give examples. Do not copy from the vacancy announcement or the position description. Explain it in your own words and give examples to be considered for this vacancy.
All personnel applying for this position who do not meet the minimum military grade requirement MUST provide the proper signed memorandum from your respective Military Personnel Office (MILPO for ARNG, FSS for ANG) to prove eligibility to obtain the required grade upon accepting the position. All personnel who exceed the maximum military rank must provide a memorandum explaining if selected for this position, you will accept an administrative reduction in rank. The memorandum must be submitted WITH your application to be considered for this position.
MINIMUM REQUIREMENTS: Experience or training that has provided the ability to perform assembly and disassembly operations and make prescribed modifications to aircraft engines, engine assemblies, and accessories in accordance with technical specifications, procedures, and requirements. Experience using hand and power tools common to the trade.
SPECIALIZED EXPERIENCE: Experience or training performing standard, routine assembly and disassembly operations and making prescribed modifications to aircraft engines, engine assemblies, and accessories. Experience or training performing maintenance overhaul, troubleshooting, testing, and repair of aircraft engines, engine components, and powertrains for fixed and/or rotary wing aircraft. Experience determining maintenance needed from work orders, inspection reports, historical records, and diagnosis.
Education
There are no educational requirements for this position.
Additional information
Permanent Change of Station: PCS funds are not available for this position.
Incentives: Relocation and Recruitment Incentives may be authorized for this position.
All WVNG positions are pending availability of resources and funds.
Definitions for Areas of Consideration:
Area 1: Current On-board Title 5 Employees and Title 32 Technicians (Tenure: 1- Permanent, 2-Conditional, 3-Indefinite) and Permanent AGR's in the West Virginia National Guard.
Area 2: WVNG Army M-Day and Air Force DSG (Drill-Status Guardsmen,) Temporary Title 32 Technicians and Title 5 Employees, Temporary AGR (OTOT), and national guardsmen serving on Full-time National Guard Duty - Operational Support Orders (ADOS).
Area 3: Current On-board Federal Employees (Tenure: 1-Career, 2-Conditional, 3-Indefinite) from another Federal Agency nationwide.
Area 4: Federal re-employable eligible employees, National Guardsmen outside of the WVNG, and U.S Citizens willing to join the West Virginia National Guard as a condition of employment.
Area 5: All U.S. Citizens.
Position Description # D1635000
This position is located in an Air National Guard Aviation Wing, Maintenance Group, Maintenance Squadron, Propulsion Element, (Jet Engine Intermediate Maintenance, (JEIM) and the Hush House). The primary purpose of this position is to certify acceptable performance, test, repair, trouble-shoot, operationally check and modify aircraft turbine and auxiliary power units, and associated propulsion system components. Performs other duties as assigned.
Major Duties:
(1) Troubleshoots malfunctioning engines and interrelated propulsion system components, determines degree of disassembly or certification required, repairs or replaces defective components, diagnostic computers and associated hardware.
(2) Troubleshoots, modifies, repairs, and performs sequential disassembly and assembly of gearboxes and auxiliary power units.
(3) Performs scheduled and special evaluations on installed engines, auxiliary power units, and associated airframe-mounted systems.
(4) Performs command directed and locally established in-progress inspections (IPI) (certifying acceptable performance of all conventional or modified aircraft engines prior to their being installed in the aircraft or placed in inventory) of propulsion system components and associated equipment to determine adequacy of workmanship, materials and maintenance.
(5) Requisitions, processes, and accounts for supply assets as required by the repairable processing system. Verifies compatibility of engine components.
(6) Provides technical advice and troubleshooting expertise to other work centers when propulsion systems affect or are affected by interrelated aircraft systems, such as: electro-environmental, pneudraulic, fuel and avionics systems.
(7) Provides on-the-job training to lower graded personnel or newly assigned personnel regardless of grade. Trains lower graded employees on proper certification techniques of installed engine components. Provides instruction in repair and inspection techniques of aircraft engine components and related equipment.
(8) Examines recurring malfunctions and initiates corrective actions by submission of quality deficiency or software deficiency reports. Devises repair procedures based on findings and recommends program changes or data corrections to correct software or technical data deficiencies.
(9) Serves as the hazardous materials manager as required. Interprets and follows state and federal regulations regarding the reclamation, storage and transportation of hazardous materials.
(10) Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections (ORI), Inspector General (IG) Inspections, Unit Effectiveness Inspections and mobility and command support exercises.
(11) Performs other duties as assigned.
Requirements
Conditions of employment
- NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
- This is an excepted service position that requires membership in military assignment in WV's National Guard, and is required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
- Male applicants born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered, or you are not eligible for appointment in this agency.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a probationary period.
- Participation in direct deposit is mandatory.
- U.S. Citizenship is required.
- Required to obtain and maintain a satisfactory security clearance, AND, as a minimum, a completed National Agency Check (NAC) prior to assignment.
- The agency will provide additional information regarding what information or documentation will be needed and how you can request of the agency a legally required exception from this requirement.
MINIMUM MILITARY GRADE: E3 MAXIMUM MILITARY GRADE : E6
Your rank MUST be included somewhere within your resume.
You must fully substantiate in your own words that you meet the requirements listed below. When explaining minimum requirements and specialized experience you must give examples. Do not copy from the vacancy announcement or the position description. Explain it in your own words and give examples to be considered for this vacancy.
All personnel applying for this position who do not meet the minimum military grade requirement MUST provide the proper signed memorandum from your respective Military Personnel Office (MILPO for ARNG, FSS for ANG) to prove eligibility to obtain the required grade upon accepting the position. All personnel who exceed the maximum military rank must provide a memorandum explaining if selected for this position, you will accept an administrative reduction in rank. The memorandum must be submitted WITH your application to be considered for this position.
MINIMUM REQUIREMENTS: Experience or training that has provided the ability to perform assembly and disassembly operations and make prescribed modifications to aircraft engines, engine assemblies, and accessories in accordance with technical specifications, procedures, and requirements. Experience using hand and power tools common to the trade.
SPECIALIZED EXPERIENCE: Experience or training performing standard, routine assembly and disassembly operations and making prescribed modifications to aircraft engines, engine assemblies, and accessories. Experience or training performing maintenance overhaul, troubleshooting, testing, and repair of aircraft engines, engine components, and powertrains for fixed and/or rotary wing aircraft. Experience determining maintenance needed from work orders, inspection reports, historical records, and diagnosis.
Education
There are no educational requirements for this position.
Additional information
Permanent Change of Station: PCS funds are not available for this position.
Incentives: Relocation and Recruitment Incentives may be authorized for this position.
All WVNG positions are pending availability of resources and funds.
Definitions for Areas of Consideration:
Area 1: Current On-board Title 5 Employees and Title 32 Technicians (Tenure: 1- Permanent, 2-Conditional, 3-Indefinite) and Permanent AGR's in the West Virginia National Guard.
Area 2: WVNG Army M-Day and Air Force DSG (Drill-Status Guardsmen,) Temporary Title 32 Technicians and Title 5 Employees, Temporary AGR (OTOT), and national guardsmen serving on Full-time National Guard Duty - Operational Support Orders (ADOS).
Area 3: Current On-board Federal Employees (Tenure: 1-Career, 2-Conditional, 3-Indefinite) from another Federal Agency nationwide.
Area 4: Federal re-employable eligible employees, National Guardsmen outside of the WVNG, and U.S Citizens willing to join the West Virginia National Guard as a condition of employment.
Area 5: All U.S. Citizens.
group id: DOAF
