Posted today
Secret
Unspecified
Unspecified
Engineering - Systems
TN (On-Site/Office)
Duties
Conditions of employment
Experience requirements are described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions,
ADDITIONAL QUALIFICATION REQUIREMENT: SPECIALIZED EXPERIENCE: Must have at least 1 year of specialized experience at the next lower grade level or band or equivalent pay scale providing supervision, leadership, administrative, technical guidance and functional oversight of occupational, test, systems, weapons, and flight safety as well as the primary Contracting Officer's Representative (COR) for the safety programs of multiple contractors. It may have been gained in the private sector, volunteer service, military service, and/or government service, etc.
IDEAL CANDIDATE:
The ideal candidate would have at least 4 years of relevant T&E experience and safety experience (in either test, flight safety, occupational or weapons disciplines); with previous Contractor Officer Representative (COR) experience and an advanced degree in engineering.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1 . Expert knowledge of the safety engineering field for the complex, high-risk programs related to the
development, acquisition, and sustainment of agency-wide aeronautical weapon systems, subsystems, and
equipment.
2. Knowledge of policies and procedures for accomplishment of Flight Safety, Weapon Safety, Ground Safety,
Range Safety, and System Safety programs. Comprehensive knowledge of Department of Labor and Air Force
occupational safety and health standards, procedures, methods, techniques and regulations sufficient to assist
subordinates in identifying and evaluating complex safety and occupational hazards in a wide variety of high
safety risk activities involving industrial operations. Comprehensive knowledge of industrial procedures and work
processes, aircraft ground operations, shop machinery design, material handling procedures, toxic and hazardous
materials, and compressed gases sufficient to ensure employees correctly develop, organize and execute
comprehensive surveillance and evaluation programs.
3. Knowledge of personnel, EEO, health, personal safety and security regulations, practices, and procedures.
4. Ability to plan, organize, and direct the functions and staff of a small to medium sized organization.
5. Ability to analyze, plan, and adjust work operations to meet program requirements and objectives within
available resources.
6. Ability to communicate, both verbally and in writing.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
Basic Qualification Requirement: You must meet one of the following qualification requirements by the closing date and provide documentation to support your qualifications (If you are using education to qualify, failure to submit the required documentation will result in you being rated ineligible. See sections on "College Transcripts" and "Foreign Education" below for required documentation.):
A. Degree: Have a Bachelor's Degree in professional engineering from a curriculum (1) in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineer curriculum; or (2) include differential and integral calculus and courses (beyond first-year physics and chemistry) in five of the following seven areas of engineering science or physics; (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Education/Experience: Have a combination of education and experience--college level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences, and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional Registration. Have current registration as a professional engineer.
2. Written Test. Have evidence of successfully passing the written test required for professional registration or have successfully passed the Engineer-in-Training (EIT) examination and have completed all the requirements for either (a) a Bachelor's Degree in Engineering Technology (BET) from an accredited college or university that included 60 semester or 90 quarter hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by ABET.
3. Specified Academic Courses. Have successfully completed at least 60 semester or 90 quarter hours of courses in the Physical, Mathematical, and Engineering sciences and in Engineering that included the courses specified in "A" above.
4. Related Curriculum. Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
Basic Qualification Supporting Documentation. This position has a specific education requirement. You must submit the appropriate documentation in accordance with the response selected in the assessments:
Copy of college transcripts
Failure to provide the appropriate documentation will result in an ineligible rating.
If selected, you will be required to provide an original/official copy of your documentation before entering on duty.
*Complete list of all college courses must identify: college or university attended, course title/number taken, semester or quarter hours earned, grade and grade-point received. Transcripts must reflect receipt of degree and date degree was awarded, if applicable. To receive credit for foreign education, you must provide proof that the education has been evaluated by an organization specializing in interpretation of foreign educational credentials and has been deemed to be at least equivalent to that gained in conventional U.S. education programs.
Additional information
This public notice is to gather applications that may or may not result in a referral or selection.
This job announcement may close at any time - apply now!
AcqDemo Expanded Probationary Period for Supervisors and Managers: An additional supervisory probationary period of one year may be required when an employee is officially assigned to a different supervisory position.
This is an acquisition demonstration project position NH-04 equivalent to a GS-14 to GS-15.
If you have questions regarding this announcement and have hearing or speech difficulties click .
Tax Law Impact for PCS: On 22-Dec-2017, Public Law 115-97 - the "Tax Cuts and Jobs Act of 2017" suspended qualified moving expense deductions along with the exclusion for employer reimbursements and payments of moving expenses effective 01-Jan-2018 for tax years 2018 through 2025. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit GSA Bulletin FTR 20-04 for additional information.
- Exercises supervisory personnel management responsibilities at least 25% of the time.
- Plans, organizes, and directs test/system safety engineering, occupational, flight, and weapons safety activities of the
organization, ensuring compliance with Air Force and Federal regulatory requirements. - Serves as a safety advisor to the Wing Commander and all levels of management.
- Represents the Office with a variety of installation and functional area organizations.
Conditions of employment
- U.S. Citizenship is required
- Males must be registered for Selective Service, see Legal and Regulatory Guidance
- PCS expenses if authorized will be paid IAW JTR and Air Force Regulations. This is a Centrally Managed position under the Scientist and Engineer Career Field.
- This posn is subject to provisions of the DoD Priority Placement Program
- For more information on Acq Demo please go to DoD AcqDemo Homepage http://acqdemo.hci.mil/ and Fact Sheet http://acqdemo.hci.mil/faq.html
- Relocation costs or other incentives may be available and considered by the organization.
- Selectee is expected to be granted with and/or maintain the appropriate security clearance required for the position.
- Employee must maintain current certifications
- This position may require drug testing and the candidate may be subject to passing a drug test upon selection.
- Disclosure of Political Appointments
- All federal employees are required to have direct deposit.
- This position may require travel.
- Selectee may be required to serve a probationary or trial period.
- Incumbent is required to file an OGE Form 450, Confidential Financial Disclosure Report, upon appointment and will be required to file annually.
- Employee may be required to work overtime or an irregular work shift.
Experience requirements are described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions,
ADDITIONAL QUALIFICATION REQUIREMENT: SPECIALIZED EXPERIENCE: Must have at least 1 year of specialized experience at the next lower grade level or band or equivalent pay scale providing supervision, leadership, administrative, technical guidance and functional oversight of occupational, test, systems, weapons, and flight safety as well as the primary Contracting Officer's Representative (COR) for the safety programs of multiple contractors. It may have been gained in the private sector, volunteer service, military service, and/or government service, etc.
IDEAL CANDIDATE:
The ideal candidate would have at least 4 years of relevant T&E experience and safety experience (in either test, flight safety, occupational or weapons disciplines); with previous Contractor Officer Representative (COR) experience and an advanced degree in engineering.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1 . Expert knowledge of the safety engineering field for the complex, high-risk programs related to the
development, acquisition, and sustainment of agency-wide aeronautical weapon systems, subsystems, and
equipment.
2. Knowledge of policies and procedures for accomplishment of Flight Safety, Weapon Safety, Ground Safety,
Range Safety, and System Safety programs. Comprehensive knowledge of Department of Labor and Air Force
occupational safety and health standards, procedures, methods, techniques and regulations sufficient to assist
subordinates in identifying and evaluating complex safety and occupational hazards in a wide variety of high
safety risk activities involving industrial operations. Comprehensive knowledge of industrial procedures and work
processes, aircraft ground operations, shop machinery design, material handling procedures, toxic and hazardous
materials, and compressed gases sufficient to ensure employees correctly develop, organize and execute
comprehensive surveillance and evaluation programs.
3. Knowledge of personnel, EEO, health, personal safety and security regulations, practices, and procedures.
4. Ability to plan, organize, and direct the functions and staff of a small to medium sized organization.
5. Ability to analyze, plan, and adjust work operations to meet program requirements and objectives within
available resources.
6. Ability to communicate, both verbally and in writing.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
Basic Qualification Requirement: You must meet one of the following qualification requirements by the closing date and provide documentation to support your qualifications (If you are using education to qualify, failure to submit the required documentation will result in you being rated ineligible. See sections on "College Transcripts" and "Foreign Education" below for required documentation.):
A. Degree: Have a Bachelor's Degree in professional engineering from a curriculum (1) in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineer curriculum; or (2) include differential and integral calculus and courses (beyond first-year physics and chemistry) in five of the following seven areas of engineering science or physics; (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Education/Experience: Have a combination of education and experience--college level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences, and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional Registration. Have current registration as a professional engineer.
2. Written Test. Have evidence of successfully passing the written test required for professional registration or have successfully passed the Engineer-in-Training (EIT) examination and have completed all the requirements for either (a) a Bachelor's Degree in Engineering Technology (BET) from an accredited college or university that included 60 semester or 90 quarter hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by ABET.
3. Specified Academic Courses. Have successfully completed at least 60 semester or 90 quarter hours of courses in the Physical, Mathematical, and Engineering sciences and in Engineering that included the courses specified in "A" above.
4. Related Curriculum. Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
Basic Qualification Supporting Documentation. This position has a specific education requirement. You must submit the appropriate documentation in accordance with the response selected in the assessments:
Copy of college transcripts
- If you are a current federal employee in the GS-800 series as an engineer, you may submit your most recent SF-50 in lieu of college transcripts
- Complete college course list*
- Professional engineer license
- Training plan, performance appraisal and/or letter from Professional Engineer Supervisor - Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering type experience. If you are using a related curriculum to qualify, failure to submit the following documentation will result in you being rated ineligible. You must submit a legible copy of your training plan, performance appraisal and/or a letter from your Professional Engineer Supervisor.
Failure to provide the appropriate documentation will result in an ineligible rating.
If selected, you will be required to provide an original/official copy of your documentation before entering on duty.
*Complete list of all college courses must identify: college or university attended, course title/number taken, semester or quarter hours earned, grade and grade-point received. Transcripts must reflect receipt of degree and date degree was awarded, if applicable. To receive credit for foreign education, you must provide proof that the education has been evaluated by an organization specializing in interpretation of foreign educational credentials and has been deemed to be at least equivalent to that gained in conventional U.S. education programs.
Additional information
This public notice is to gather applications that may or may not result in a referral or selection.
This job announcement may close at any time - apply now!
AcqDemo Expanded Probationary Period for Supervisors and Managers: An additional supervisory probationary period of one year may be required when an employee is officially assigned to a different supervisory position.
This is an acquisition demonstration project position NH-04 equivalent to a GS-14 to GS-15.
If you have questions regarding this announcement and have hearing or speech difficulties click .
Tax Law Impact for PCS: On 22-Dec-2017, Public Law 115-97 - the "Tax Cuts and Jobs Act of 2017" suspended qualified moving expense deductions along with the exclusion for employer reimbursements and payments of moving expenses effective 01-Jan-2018 for tax years 2018 through 2025. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit GSA Bulletin FTR 20-04 for additional information.
group id: DOAF
