Posted today
Secret
Unspecified
Unspecified
Engineering - Mechanical
Montgomery, AL (On-Site/Office)
Duties
1. Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. (30%)
2. Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal. Applies technical data and equipment specifications to determine the impact that equipment modifications or substitutions will have upon integrated multi-system operations and various maintenance alignment procedures.(20%)
3. Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off-equipment maintenance on systems such as automatic flight control, instruments, communication, navigation, and inertial navigation. Coordinates back shop bench check (if applicable, completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs).(20%)
4. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts aircrew debriefing to determine the nature of system malfunctions. Documents all discrepancies and maintenance actions performed by inputting information into the electronic records information systems (i.e.: CAMS, IMDS, GO-81, REMIS). Recommends hardware and software changes. Submits change recommendations to Technical Orders. Requisitions supply assets and processes repairable assets in accordance with Standard Base Supply System requirements. Documents maintenance actions in aircraft forms and documents man-hour expenditures and maintenance actions in the maintenance computer system. Maintains Electronic Warfare (EW) (if applicable) and analysis equipment such as infrared/radar warning equipment, infrared/radar jamming equipment, chaff/flare dispensing systems, signal analysis equipment, recorders, direction finders, and special purpose test equipment. Accomplishes organizational and intermediate level modifications.(15%)
5. May upload and download chaff/flare dispensers. This hazardous task may involve the inspection, storage and handling of explosive devices; to include flares, chaff, impulse cartridges and similar items. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary. Provides training to lower graded personnel concerned with the repair of integrated avionics systems. Provides training to newly assigned personnel regardless of grade level. Prepares for and participates in Aerospace Expeditionary Force (AEF) tasking, deployments and various inspections and exercises. Processes and accounts for due-in from maintenance (DIFM) supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification. (10%)
6. May be required to perform additional duties such as structural fire-fighting, aircraft fire/crash/rescue duty, serve as a security guard, remove snow, load and handle munitions, launch/recover and service aircraft, operate heavy equipment, maintain facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. (10%)
Performs other duties as assigned.
Requirements
Conditions of employment
MILITARY REQUIREMENTS: This is an excepted service position that requires membership in a compatible military grade in the Alabama Air National Guard. Applicants who are not currently a member of the Alabama Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Alabama Air National Guard recruiter at (800) 864-6264 prior to applying for this position.
MINIMUM MILITARY RANK: A1C
MAXIMUM MILITARY RANK: TSGT
EXPERIENCE REQUIREMENTS: Each applicant must fully substantiate (in his/her own words) that he/she meets the requirements of the Specialized Experience listed below: Otherwise, the applicant will be considered unqualified for this position. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. DOING SO MAY RESULT IN DISQUALIFICATION FOR THE POSITION.
GENERAL EXPERIENCE: An applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.
SPECIALIZED EXPERIENCE: Experience that prepares the applicant to perform the duties of the position. The applicant's educational-degree study program or specific academic courses may substitute for some specialized experience. An applicant must demonstrate the identified specialized experience competencies (skills, knowledge, abilities and behaviors) to qualify for a FWS 2610 position as identified by its applicable grade.
The applicant must have at least 12 months of specialized experiences working as an Electronic Integrated Systems Mechanic, WG-2610-12, and must possess the craftsman level of knowledge and skills to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Experiences included the ability and skills to perform on-or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on systems such as, automatic flight control systems, instrument systems, inertial and radar navigation systems. Experienced in performing scheduled and unscheduled maintenance on one or more multi complex electronic integrated systems. Experiences included completing operational checks, inspections, tests, trouble shooting, removal and replacement of line-replaceable units which are linked with integrated systems and line-replaceable-units which are independent or associated with nonintegrated systems. Must have skilled capabilities of isolating unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and flight line test systems. Skilled in solving complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Experiences involved adjusting and aligning system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Skilled in the installation of serviceable components into aircraft and performed total systems alignment and harmonization in accordance with existing technical orders and directives. Experienced and skilled in completing technical order compliances, completing component and system modifications, and performing thorough system checks for correct operations. Skilled in maintaining, modifying, calibrating, and inspecting a wide variety of user test, measurement, and diagnostic equipment. Experienced in performing installations, modifications, overhauling, maintaining, troubleshooting, repairing, rebuilding, aligning, and calibrating complete electronic avionics multi-system controls. Must have a thorough FWS 2610 Qualification Requirements, Continued on Next Page NGB Excepted Service Qualification Standard FWS 2610 17 March 2017 10 working knowledge of complex aircraft avionics or electronic circuit maintenance systems such as, the electronics package in highly automated aircraft where the integrated flight and integrated countermeasures system, electronic multiplex communications bus, inertial navigation system, multi-function displays, head-up display, data transfer equipment, global positioning system, situation awareness data-link, data modem, flight control system, pivot-static system and related instrumentation, flight director instrumentation, central air data computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, various modes of data, intercom, secure voice communications, identification friend or foe, and tactical air navigation system. Experienced in evaluating operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Skilled in analyzing the malfunctions encountered through fault codes, determining repair sequence process and performing required repairs. Experiences involved reviewing and analyzing maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Skilled in performing alignments, adjustments, and conducting final calibrations on integrated systems to determine successful repairs. Experienced in monitoring the operations of complex, inter-related systems, analyzing operating trends, and proposing preventative maintenance down time. Skilled in the applications of technical data and equipment specifications that determine the impact equipment modifications or substitutions on integrated multi-system operations and various maintenance alignment procedures. Competent in using algebraic and trigonometric functions to adapt standard formulas to the specific requirements of the integrated system. Experiences involved the installation, operation, and repair work on prototypes or experimental electronic systems such as, inertial navigation or automatic flight control. Competent in advising aerospace engineering personnel on the operation and maintenance effects of proposed time compliance technical orders' modifications on new or existing equipment.
SKILL AND KNOWLEDGE:
-- Knowledge of electronic theories and practices of integrated electronic, pneumatic, hydraulic, optical, and mechanical systems of such applications as digital or analog computers, digital display devices which enables the incumbent to understand and predict the effects of subsystem malfunctions on the total function system.
-- Ability to apply electronic theories and practices to identify, isolate and repair malfunctions in one or more complex integrated systems where knowledge of the entire system is necessary to interpret error data and trace problems back through a number of units of the system to locate deficiencies.
-- Thorough knowledge of the principles of digital and analog circuits, solid state devices theory, electromechanical devices, digital techniques, synchro/servo operation and integrated circuit theory. Ability to interpret/trace schematics, logic/wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE). Ability to perform algebraic and trigonometric formulas.
-- Knowledge of the technology and practices which integrate the components of the systems into a total functional system. Determine methods of repair where extremely complex relationships exist among numerous inter-connected units and control circuits; not only within the individual control systems but between them as well.
Education
SUBSTITUTION OF EDUCATION IS NOT CONSIDERED FOR WAGE GRADE POSITIONS.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
**This position may be authorized a recruitment or relocation incentive for up to 25%. All incentives must be approved prior to the employee in processing.**
1. Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. (30%)
2. Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal. Applies technical data and equipment specifications to determine the impact that equipment modifications or substitutions will have upon integrated multi-system operations and various maintenance alignment procedures.(20%)
3. Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off-equipment maintenance on systems such as automatic flight control, instruments, communication, navigation, and inertial navigation. Coordinates back shop bench check (if applicable, completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs).(20%)
4. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts aircrew debriefing to determine the nature of system malfunctions. Documents all discrepancies and maintenance actions performed by inputting information into the electronic records information systems (i.e.: CAMS, IMDS, GO-81, REMIS). Recommends hardware and software changes. Submits change recommendations to Technical Orders. Requisitions supply assets and processes repairable assets in accordance with Standard Base Supply System requirements. Documents maintenance actions in aircraft forms and documents man-hour expenditures and maintenance actions in the maintenance computer system. Maintains Electronic Warfare (EW) (if applicable) and analysis equipment such as infrared/radar warning equipment, infrared/radar jamming equipment, chaff/flare dispensing systems, signal analysis equipment, recorders, direction finders, and special purpose test equipment. Accomplishes organizational and intermediate level modifications.(15%)
5. May upload and download chaff/flare dispensers. This hazardous task may involve the inspection, storage and handling of explosive devices; to include flares, chaff, impulse cartridges and similar items. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary. Provides training to lower graded personnel concerned with the repair of integrated avionics systems. Provides training to newly assigned personnel regardless of grade level. Prepares for and participates in Aerospace Expeditionary Force (AEF) tasking, deployments and various inspections and exercises. Processes and accounts for due-in from maintenance (DIFM) supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification. (10%)
6. May be required to perform additional duties such as structural fire-fighting, aircraft fire/crash/rescue duty, serve as a security guard, remove snow, load and handle munitions, launch/recover and service aircraft, operate heavy equipment, maintain facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. (10%)
Performs other duties as assigned.
Requirements
Conditions of employment
- NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
- This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
- May be required to successfully complete a probationary period.
- Participation in direct deposit is mandatory.
- May occasionally be required to work other than normal duty hours; overtime may be required.
MILITARY REQUIREMENTS: This is an excepted service position that requires membership in a compatible military grade in the Alabama Air National Guard. Applicants who are not currently a member of the Alabama Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Alabama Air National Guard recruiter at (800) 864-6264 prior to applying for this position.
MINIMUM MILITARY RANK: A1C
MAXIMUM MILITARY RANK: TSGT
EXPERIENCE REQUIREMENTS: Each applicant must fully substantiate (in his/her own words) that he/she meets the requirements of the Specialized Experience listed below: Otherwise, the applicant will be considered unqualified for this position. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. DOING SO MAY RESULT IN DISQUALIFICATION FOR THE POSITION.
GENERAL EXPERIENCE: An applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.
SPECIALIZED EXPERIENCE: Experience that prepares the applicant to perform the duties of the position. The applicant's educational-degree study program or specific academic courses may substitute for some specialized experience. An applicant must demonstrate the identified specialized experience competencies (skills, knowledge, abilities and behaviors) to qualify for a FWS 2610 position as identified by its applicable grade.
The applicant must have at least 12 months of specialized experiences working as an Electronic Integrated Systems Mechanic, WG-2610-12, and must possess the craftsman level of knowledge and skills to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Experiences included the ability and skills to perform on-or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on systems such as, automatic flight control systems, instrument systems, inertial and radar navigation systems. Experienced in performing scheduled and unscheduled maintenance on one or more multi complex electronic integrated systems. Experiences included completing operational checks, inspections, tests, trouble shooting, removal and replacement of line-replaceable units which are linked with integrated systems and line-replaceable-units which are independent or associated with nonintegrated systems. Must have skilled capabilities of isolating unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and flight line test systems. Skilled in solving complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Experiences involved adjusting and aligning system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Skilled in the installation of serviceable components into aircraft and performed total systems alignment and harmonization in accordance with existing technical orders and directives. Experienced and skilled in completing technical order compliances, completing component and system modifications, and performing thorough system checks for correct operations. Skilled in maintaining, modifying, calibrating, and inspecting a wide variety of user test, measurement, and diagnostic equipment. Experienced in performing installations, modifications, overhauling, maintaining, troubleshooting, repairing, rebuilding, aligning, and calibrating complete electronic avionics multi-system controls. Must have a thorough FWS 2610 Qualification Requirements, Continued on Next Page NGB Excepted Service Qualification Standard FWS 2610 17 March 2017 10 working knowledge of complex aircraft avionics or electronic circuit maintenance systems such as, the electronics package in highly automated aircraft where the integrated flight and integrated countermeasures system, electronic multiplex communications bus, inertial navigation system, multi-function displays, head-up display, data transfer equipment, global positioning system, situation awareness data-link, data modem, flight control system, pivot-static system and related instrumentation, flight director instrumentation, central air data computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, various modes of data, intercom, secure voice communications, identification friend or foe, and tactical air navigation system. Experienced in evaluating operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Skilled in analyzing the malfunctions encountered through fault codes, determining repair sequence process and performing required repairs. Experiences involved reviewing and analyzing maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Skilled in performing alignments, adjustments, and conducting final calibrations on integrated systems to determine successful repairs. Experienced in monitoring the operations of complex, inter-related systems, analyzing operating trends, and proposing preventative maintenance down time. Skilled in the applications of technical data and equipment specifications that determine the impact equipment modifications or substitutions on integrated multi-system operations and various maintenance alignment procedures. Competent in using algebraic and trigonometric functions to adapt standard formulas to the specific requirements of the integrated system. Experiences involved the installation, operation, and repair work on prototypes or experimental electronic systems such as, inertial navigation or automatic flight control. Competent in advising aerospace engineering personnel on the operation and maintenance effects of proposed time compliance technical orders' modifications on new or existing equipment.
SKILL AND KNOWLEDGE:
-- Knowledge of electronic theories and practices of integrated electronic, pneumatic, hydraulic, optical, and mechanical systems of such applications as digital or analog computers, digital display devices which enables the incumbent to understand and predict the effects of subsystem malfunctions on the total function system.
-- Ability to apply electronic theories and practices to identify, isolate and repair malfunctions in one or more complex integrated systems where knowledge of the entire system is necessary to interpret error data and trace problems back through a number of units of the system to locate deficiencies.
-- Thorough knowledge of the principles of digital and analog circuits, solid state devices theory, electromechanical devices, digital techniques, synchro/servo operation and integrated circuit theory. Ability to interpret/trace schematics, logic/wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE). Ability to perform algebraic and trigonometric formulas.
-- Knowledge of the technology and practices which integrate the components of the systems into a total functional system. Determine methods of repair where extremely complex relationships exist among numerous inter-connected units and control circuits; not only within the individual control systems but between them as well.
Education
SUBSTITUTION OF EDUCATION IS NOT CONSIDERED FOR WAGE GRADE POSITIONS.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
**This position may be authorized a recruitment or relocation incentive for up to 25%. All incentives must be approved prior to the employee in processing.**
group id: DOAF
