Posted today
Secret
Unspecified
Unspecified
Construction/Facilities
Pittsburgh, PA (On-Site/Office)
Duties
As a Machinist, WG-3414-11, you will perform all types of machining operations to manufacture, modify, and repair aircraft parts, support equipment, tools, and assemblies. Lays out work, read and interpret blueprints and technical publications, designs and draws working sketches, makes special tools, dies, jigs, and fixtures, performs production work of aircraft parts, and works to tolerances varying from.0l0 to .0005 inch. Weld ferrous and non-ferrous metals and alloys such as cobalt, chrome, nickel, aluminum, magnesium, and titanium. Compare machine parts with drawings, technical orders, or specifications for conformance with established tolerances, fits, and surface finish. Conduct training of drill status guard (DSG) members assigned to the shop. Prepare for and participates in various types of readiness evaluations and inspections, mobility, and command support exercises. May be required to be aircraft welder certified. Perform other duties as assigned.
Requirements
Conditions of employment
APPOINTMENT STATUS: EXCEPTED
This is a Dual Status Excepted Service Technician position in the Pennsylvania Air National Guard.
AREA OF CONSIDERATION:
Bargaining Position
AOC 1: NG Employees at the 171st Air Refueling Wing
AOC 2: NG employees in the 171st Air Refueling Wing (This includes 258th ATCS, 146 Weather Flight, 146 ARS, and 147 ARS)
AOC 3: NG Employees of the Pennsylvania National Guard
AOC 4: All service members of the Pennsylvania National Guard (This includes Traditional Airmen, Temporary Technicians and AGR Personnel)
AOC 5: Individuals who are currently serving in another branch of service who are willing to become members of the PANG
Military Grades:
ENLISTED E3-E6
Supervisor for this position is MSgt Przybysz
Manpower #0115161334
*NOTE: Accessioning into this position is contingent upon verification of Secret Security Clearance
-Individual(s) nominated must successfully complete a baseline initial employment physical examination in accordance with 5 CFR, Part 339 and Technician Personnel Regulation TPR 335.
GENERAL EXPERIENCE: Experience or training that has provided the candidate with a basic knowledge of machining processes. Must have the ability to use drill presses, shapers, planers and other types of associated machine tools.
SPECIALIZED EXPERIENCE: Experience or training performing the full range of machining operations on most types of conventional or CNC machine tools and their various attachments. Experience or training in planning and lay out work from blueprints, worksheets and other drawings that may have missing or incorrect information. Skill in applying shop mathematics in establishing needed dimensions, such as those required for chasing threads or machining angular surfaces, locating and marking surfaces and angles to be machined. Skill in programming machining operations, setting up and operating CNC machine tools. Knowledge of and ability to apply advanced shop mathematics such as geometric and trigonometric formulas to make computation for laying out work, machining pieces at unusual or compound angles, determining gear ratios pitch, angles and other similar exact or precision dimension.
QUALITY OF EXPERIENCE: Length of time is not of itself qualifying. Candidates' experience should be evaluated on the basis of duties performed rather than strictly on the rank of the individual; however, established compatibility criteria/assignments must be followed. The applicant's record of experience, training, and education must show possession of the knowledge, skills, and abilities needed to fully perform the duties of the position to be filled.
SPECIAL NOTE: Per the Merit Promotion and Placement Plan (MPP) if there are more than 15 qualified applicants for each position, by category, a KSA board will be convened in accordance with Chapter 4 of the MPP.
PCS STATEMENT: PERMANENT CHANGE OF STATION COSTS WILL NOT BE PAID FOR THIS POSITION
The Department of Military and Veterans Affairs is a diverse team of professionals who strengthen our commonwealth by serving our veterans and partners while preparing military personnel to safeguard our way of life. We do not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factors.
Applicants that are currently in an AGR status who wish to request to move their AGR resource to this position upon selection, must submit a "Request for AGR Resource Realignment" memo with their application. A template for the memo can be found at:
Education
There is no educational substitute for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
REPROMOTION CONSIDERATION (Applies to technician applicants only.)
Technicians who have been demoted from this or a higher grade previously held in the same occupational series without personal cause and who are not in a grade retention status will be given consideration for re-promotion. Technicians who believe they are entitled to such consideration should forward a description of the circumstances with their application. Technicians eligible for re-promotion will be considered prior to using competitive promotion procedures, except when another technician has a statutory or regulatory right to be placed in or considered for the position.
In accordance with section 9902(h) of title 5, United States Code, annuitants reemployed in the Department of Defense shall receive full annuity and salary upon appointment. They shall not be eligible for retirement contributions, participation in the Thrift Savings Plan, or a supplemental or redetermined annuity for the employment period. Discontinued service retirement annuitants (i.e., retired under section 8336(d)(1) or 8414(b)(1)(A) of title 5 United States Code) appointed to the Department of Defense may elect to be subject to retirement provisions of the new appointment as appropriate. (See DoD Instruction 1400.25, Volume 300, at .)
As a Machinist, WG-3414-11, you will perform all types of machining operations to manufacture, modify, and repair aircraft parts, support equipment, tools, and assemblies. Lays out work, read and interpret blueprints and technical publications, designs and draws working sketches, makes special tools, dies, jigs, and fixtures, performs production work of aircraft parts, and works to tolerances varying from.0l0 to .0005 inch. Weld ferrous and non-ferrous metals and alloys such as cobalt, chrome, nickel, aluminum, magnesium, and titanium. Compare machine parts with drawings, technical orders, or specifications for conformance with established tolerances, fits, and surface finish. Conduct training of drill status guard (DSG) members assigned to the shop. Prepare for and participates in various types of readiness evaluations and inspections, mobility, and command support exercises. May be required to be aircraft welder certified. Perform other duties as assigned.
Requirements
Conditions of employment
- NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
- This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
- Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a trial period.
- Participation in direct deposit is mandatory.
APPOINTMENT STATUS: EXCEPTED
This is a Dual Status Excepted Service Technician position in the Pennsylvania Air National Guard.
AREA OF CONSIDERATION:
Bargaining Position
AOC 1: NG Employees at the 171st Air Refueling Wing
AOC 2: NG employees in the 171st Air Refueling Wing (This includes 258th ATCS, 146 Weather Flight, 146 ARS, and 147 ARS)
AOC 3: NG Employees of the Pennsylvania National Guard
AOC 4: All service members of the Pennsylvania National Guard (This includes Traditional Airmen, Temporary Technicians and AGR Personnel)
AOC 5: Individuals who are currently serving in another branch of service who are willing to become members of the PANG
Military Grades:
ENLISTED E3-E6
Supervisor for this position is MSgt Przybysz
Manpower #0115161334
*NOTE: Accessioning into this position is contingent upon verification of Secret Security Clearance
-Individual(s) nominated must successfully complete a baseline initial employment physical examination in accordance with 5 CFR, Part 339 and Technician Personnel Regulation TPR 335.
GENERAL EXPERIENCE: Experience or training that has provided the candidate with a basic knowledge of machining processes. Must have the ability to use drill presses, shapers, planers and other types of associated machine tools.
SPECIALIZED EXPERIENCE: Experience or training performing the full range of machining operations on most types of conventional or CNC machine tools and their various attachments. Experience or training in planning and lay out work from blueprints, worksheets and other drawings that may have missing or incorrect information. Skill in applying shop mathematics in establishing needed dimensions, such as those required for chasing threads or machining angular surfaces, locating and marking surfaces and angles to be machined. Skill in programming machining operations, setting up and operating CNC machine tools. Knowledge of and ability to apply advanced shop mathematics such as geometric and trigonometric formulas to make computation for laying out work, machining pieces at unusual or compound angles, determining gear ratios pitch, angles and other similar exact or precision dimension.
QUALITY OF EXPERIENCE: Length of time is not of itself qualifying. Candidates' experience should be evaluated on the basis of duties performed rather than strictly on the rank of the individual; however, established compatibility criteria/assignments must be followed. The applicant's record of experience, training, and education must show possession of the knowledge, skills, and abilities needed to fully perform the duties of the position to be filled.
SPECIAL NOTE: Per the Merit Promotion and Placement Plan (MPP) if there are more than 15 qualified applicants for each position, by category, a KSA board will be convened in accordance with Chapter 4 of the MPP.
PCS STATEMENT: PERMANENT CHANGE OF STATION COSTS WILL NOT BE PAID FOR THIS POSITION
The Department of Military and Veterans Affairs is a diverse team of professionals who strengthen our commonwealth by serving our veterans and partners while preparing military personnel to safeguard our way of life. We do not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factors.
Applicants that are currently in an AGR status who wish to request to move their AGR resource to this position upon selection, must submit a "Request for AGR Resource Realignment" memo with their application. A template for the memo can be found at:
Education
There is no educational substitute for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
REPROMOTION CONSIDERATION (Applies to technician applicants only.)
Technicians who have been demoted from this or a higher grade previously held in the same occupational series without personal cause and who are not in a grade retention status will be given consideration for re-promotion. Technicians who believe they are entitled to such consideration should forward a description of the circumstances with their application. Technicians eligible for re-promotion will be considered prior to using competitive promotion procedures, except when another technician has a statutory or regulatory right to be placed in or considered for the position.
In accordance with section 9902(h) of title 5, United States Code, annuitants reemployed in the Department of Defense shall receive full annuity and salary upon appointment. They shall not be eligible for retirement contributions, participation in the Thrift Savings Plan, or a supplemental or redetermined annuity for the employment period. Discontinued service retirement annuitants (i.e., retired under section 8336(d)(1) or 8414(b)(1)(A) of title 5 United States Code) appointed to the Department of Defense may elect to be subject to retirement provisions of the new appointment as appropriate. (See DoD Instruction 1400.25, Volume 300, at .)
group id: DOAF
