Posted today
Secret
Unspecified
Unspecified
Engineering - Systems
MS (On-Site/Office)
Duties
Conditions of employment
In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Technical and Medical Support Positions.
SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-10, or equivalent in other pay systems. Examples of specialized experience includes a comprehensive, intensive and practical knowledge of, and extensive experience and skill in applying a wide range of technical electronics concepts, practices, regulations, policies, and precedents; analytical and diagnostic techniques; and techniques for developing new or modified work methods, approaches, or procedures sufficient to: develop and recommend changes in procedures and technical instructions to management on substantive functions and practices in a high level air traffic location; develop innovative methods, approaches, or procedures to meet emergency situations in an environment where rapid equipment restoration is always paramount to ensure continuous operation where required; and identify, evaluate, and recommend appropriate solutions to resolve complex interrelated problems and issues.
FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in -grade requirements to be considered eligible. One year at the GS-10 level is required to meet the time-in-grade requirements for the GS-11 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Skill and knowledge of wide range of electronic principles and practices Digital Airport Surveillance Radar (DASR-AN/GPN-30); Standard Terminal Automation Replacement System (STARS-AN/FSQ-204); Next Generation Weather Radar System (NEXRAD-WSD-88D); Mono-pulse Secondary Surveillance Radar, (MSSR); FMQ-19 or 23 Weather System; GRC, GRT, GRR, CM-300, URC-200 Radio Systems; FCS-127 ETVS; GSH-74 DALR, Instrument Landing System (ILS), TACAN, associated support equipment, and any systems purchased to replace the aforementioned equipment.
2. Knowledge of a wide range of electronic principles and practices, operating parameters, capabilities, and limitations of electronic systems associated with air traffic control and weather radar equipment; and of systems and component design, capabilities, configurations, limitations, and functional operation; and of various types of electronics logic.
3. Knowledge of safety regulations, procedures, and practices.
4. Skill in the interpretation of technical data such as drawings, schematics, blueprints, and specifications of complete electronic systems; in analyzing problems in integrated/interfacing systems involving numerous complex circuits; and in using complex electronic and electromechanical test and measuring equipment using integrated test functions for different purposes.
5. Ability to modify standard procedures, adapt equipment or techniques, and make departures from previous approaches to solve technical problems or improve system performance for highly complex electronic systems; to trace electronics logic from one system to another; and to establish and maintain effective working relationships to represent the organization in a professional manner.
6. Ability to use computer terminals to enter and extract data to maintain records and document actions.
Knowledge of computer operating systems programs, e.g. Unix, Linux, Sun Solaris; network types; network topologies; transport devices e.g. hubs, routers, switches; and data communications equipment.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Direct Deposit: All federal employees are required to have direct deposit.
If you have questions regarding this announcement and have hearing or speech difficulties click .
Tax Law Impact for PCS: On 22-Dec-2017, Public Law 115-97 - the "Tax Cuts and Jobs Act of 2017" suspended qualified moving expense deductions along with the exclusion for employer reimbursements and payments of moving expenses effective 01-Jan-2018 for tax years 2018 through 2025. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit GSA Bulletin FTR 20-04 for additional information.
- Certifies assigned systems and sub-systems to ensure compliance with USAF and Federal Aviation Administration (FAA) established standards and safety requirements.
- Determines when equipment malfunctions warrant shutdown of various systems.
- Provides technical guidance, training, and assistance to other technicians and conducts on-the-job (OJT) training to apprentices in all phases of work.
- Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- This posn is subject to provisions of the DoD Priority Placement Program
- Disclosure of Political Appointments
- Requires CPR certification; requires recurring training to update knowledge of systems and procedures; requires knowledge of procedures for storage and handling of hazardous materials.
- Must be qualified to drive government motor vehicles and qualify for flightline driving qualification; must be able to distinguish colors and shades of colors; requires annual occupational exam and the wear of prescribed aural protection device
- This position requires a pre-employment physical/medical examination; use of both arms and legs is required; climbing of towers and ladders while using safety-climbing devices is required.
- Work may occasionally require travel away from the normal duty station on military or commercial aircraft; outdoor work sometimes performed in inclement weather or limited light conditions.
- Potential exists for injuries such as electric shock, cuts and bruises, as well as burns caused by electrical or RF energy and soldering equipment.
- Subject to shift work, overtime, telephone and pager standby (on-call) and may be required to work an uncommon tour of duty.
- As a condition of employment, the employee must meet certification requirements found in the RAWS Career Field Education and Training Plan (CFETP). The employee is required to maintain proficiency certification on an annual basis, (Continued)
- and is subject to validation of training certifications via the Quality Assurance evaluation program.
- This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. (Continued)
- Employee must pass initial and periodic short notice drug testing. Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
- Must obtain and maintain a Secret security clearance.
- Indoor and outdoor work at equipment sites requires frequent walking, kneeling, bending, prolonged standing, working in strained and uncomfortable positions, and lifting/carrying moderate (15-44 lbs.).
In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Technical and Medical Support Positions.
SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-10, or equivalent in other pay systems. Examples of specialized experience includes a comprehensive, intensive and practical knowledge of, and extensive experience and skill in applying a wide range of technical electronics concepts, practices, regulations, policies, and precedents; analytical and diagnostic techniques; and techniques for developing new or modified work methods, approaches, or procedures sufficient to: develop and recommend changes in procedures and technical instructions to management on substantive functions and practices in a high level air traffic location; develop innovative methods, approaches, or procedures to meet emergency situations in an environment where rapid equipment restoration is always paramount to ensure continuous operation where required; and identify, evaluate, and recommend appropriate solutions to resolve complex interrelated problems and issues.
FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in -grade requirements to be considered eligible. One year at the GS-10 level is required to meet the time-in-grade requirements for the GS-11 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Skill and knowledge of wide range of electronic principles and practices Digital Airport Surveillance Radar (DASR-AN/GPN-30); Standard Terminal Automation Replacement System (STARS-AN/FSQ-204); Next Generation Weather Radar System (NEXRAD-WSD-88D); Mono-pulse Secondary Surveillance Radar, (MSSR); FMQ-19 or 23 Weather System; GRC, GRT, GRR, CM-300, URC-200 Radio Systems; FCS-127 ETVS; GSH-74 DALR, Instrument Landing System (ILS), TACAN, associated support equipment, and any systems purchased to replace the aforementioned equipment.
2. Knowledge of a wide range of electronic principles and practices, operating parameters, capabilities, and limitations of electronic systems associated with air traffic control and weather radar equipment; and of systems and component design, capabilities, configurations, limitations, and functional operation; and of various types of electronics logic.
3. Knowledge of safety regulations, procedures, and practices.
4. Skill in the interpretation of technical data such as drawings, schematics, blueprints, and specifications of complete electronic systems; in analyzing problems in integrated/interfacing systems involving numerous complex circuits; and in using complex electronic and electromechanical test and measuring equipment using integrated test functions for different purposes.
5. Ability to modify standard procedures, adapt equipment or techniques, and make departures from previous approaches to solve technical problems or improve system performance for highly complex electronic systems; to trace electronics logic from one system to another; and to establish and maintain effective working relationships to represent the organization in a professional manner.
6. Ability to use computer terminals to enter and extract data to maintain records and document actions.
Knowledge of computer operating systems programs, e.g. Unix, Linux, Sun Solaris; network types; network topologies; transport devices e.g. hubs, routers, switches; and data communications equipment.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Direct Deposit: All federal employees are required to have direct deposit.
If you have questions regarding this announcement and have hearing or speech difficulties click .
Tax Law Impact for PCS: On 22-Dec-2017, Public Law 115-97 - the "Tax Cuts and Jobs Act of 2017" suspended qualified moving expense deductions along with the exclusion for employer reimbursements and payments of moving expenses effective 01-Jan-2018 for tax years 2018 through 2025. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit GSA Bulletin FTR 20-04 for additional information.
group id: DOAF
