Today
Secret
Unspecified
Unspecified
Aerospace and Aviation
Crestview, FL (On-Site/Office)
Job Number 711016BR
Description:
You will be an Aircraft Electrician II for our Special Operations Forces Global Logistic Support Services (SOF GLSS) team, based in Crestview, FL. Our team is responsible for modifying military aircraft and ground vehicles to meet the evolving operational needs of the SOF community.
What You Will Be Doing
As an Aircraft Electrician II, you will be responsible for:
• Install, route, terminate, and test electrical cables and harnesses on C-130J aircraft.
• Remove and install aircraft components as required.
• Interpret engineering drawings and blueprints such as electrical wiring diagrams, routing drawings, and harness assembly drawings.
• Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and method of install/modification.
• Use and apply hand tools, power tools, work stands, support equipment, and special tools/calibrated test equipment.
• Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.
• Frequently stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft.
• Frequently lift and/or push or pull up to 10 pounds and occasionally lift and/or push or pull up to 25 pounds.
• Perform repetitive movements and work overhead.
• Work in a safe and efficient manner while maintaining a clean, FOD-free work area.
• Properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures
Why Join Us
This position supports our Special Operations Forces - Global Logistics Support Services contract, which is the U.S. Special Operations Command's (USSOCOM) largest service contract vehicle providing a wide range of tailored logistics, maintenance, and sustainment services. Learn more here: SOF GLSS
Further Information About This Opportunity:
This position is in Crestview, FL.
MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access and is in direct support of a U.S. government contract that requires a company-sponsored clearance to start.
Basic Qualifications:
Minimum four (4) years of aircraft electrical experience required in one of the following or equivalent fields, Communications/Navigations, Guidance Control, Electronic Warfare, Avionics, Electro/Environmental required.
Minimum four (4) years demonstrated aircraft electrical experience completing wire/harness fabrication, routing, installation, and testing.
Strong proficiency and ability to read and interpret aircraft electrical drawings, diagrams, blueprints, and specifications.
Minimum or equivalent of a USAF 7-Level (Craftsman) or equivalent.
Ability to obtain and maintain a DoD secret security clearance and therefore all candidates must be a US Citizen
Desired Skills:
Heavy avionics/Electrical systems wire routing and installation experience.
Heavy Military/Commercial aircraft modification installation experience including wire harness installation and check out procedures.
Strong ability to interpret installation drawings, install and route electrical cable assemblies, perform multiple termination processes and perform continuity checks in accordance with standard processes.
Strong ability to read and interpret engineering drawings, technical manuals, understanding symbols, flags, and general notes
Experience on C-130J aircraft.
Active Secret Security Clearance preferred.
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Rotating 40 hour week as assigned by leader
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs , and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: MISSILES AND FIRE CTRL (S0806)
Relocation Available: No
Career Area: Technicians
Type: Task Order/IDIQ
Shift: Multiple shifts available
Description:
You will be an Aircraft Electrician II for our Special Operations Forces Global Logistic Support Services (SOF GLSS) team, based in Crestview, FL. Our team is responsible for modifying military aircraft and ground vehicles to meet the evolving operational needs of the SOF community.
What You Will Be Doing
As an Aircraft Electrician II, you will be responsible for:
• Install, route, terminate, and test electrical cables and harnesses on C-130J aircraft.
• Remove and install aircraft components as required.
• Interpret engineering drawings and blueprints such as electrical wiring diagrams, routing drawings, and harness assembly drawings.
• Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and method of install/modification.
• Use and apply hand tools, power tools, work stands, support equipment, and special tools/calibrated test equipment.
• Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.
• Frequently stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft.
• Frequently lift and/or push or pull up to 10 pounds and occasionally lift and/or push or pull up to 25 pounds.
• Perform repetitive movements and work overhead.
• Work in a safe and efficient manner while maintaining a clean, FOD-free work area.
• Properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures
Why Join Us
This position supports our Special Operations Forces - Global Logistics Support Services contract, which is the U.S. Special Operations Command's (USSOCOM) largest service contract vehicle providing a wide range of tailored logistics, maintenance, and sustainment services. Learn more here: SOF GLSS
Further Information About This Opportunity:
This position is in Crestview, FL.
MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access and is in direct support of a U.S. government contract that requires a company-sponsored clearance to start.
Basic Qualifications:
Minimum four (4) years of aircraft electrical experience required in one of the following or equivalent fields, Communications/Navigations, Guidance Control, Electronic Warfare, Avionics, Electro/Environmental required.
Minimum four (4) years demonstrated aircraft electrical experience completing wire/harness fabrication, routing, installation, and testing.
Strong proficiency and ability to read and interpret aircraft electrical drawings, diagrams, blueprints, and specifications.
Minimum or equivalent of a USAF 7-Level (Craftsman) or equivalent.
Ability to obtain and maintain a DoD secret security clearance and therefore all candidates must be a US Citizen
Desired Skills:
Heavy avionics/Electrical systems wire routing and installation experience.
Heavy Military/Commercial aircraft modification installation experience including wire harness installation and check out procedures.
Strong ability to interpret installation drawings, install and route electrical cable assemblies, perform multiple termination processes and perform continuity checks in accordance with standard processes.
Strong ability to read and interpret engineering drawings, technical manuals, understanding symbols, flags, and general notes
Experience on C-130J aircraft.
Active Secret Security Clearance preferred.
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Rotating 40 hour week as assigned by leader
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs , and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: MISSILES AND FIRE CTRL (S0806)
Relocation Available: No
Career Area: Technicians
Type: Task Order/IDIQ
Shift: Multiple shifts available
group id: lckmtncx
We Are Lockheed Martin.
