Today
Secret
Unspecified
Unspecified
Aerospace and Aviation
AK (On-Site/Office)
Duties
On a regular and recurring basis, leads three or more aircraft mechanics, crew chiefs, and specialist personnel performing work in the inspection docks.
Monitors the work of assigned personnel, sets the pace, passes along assignments, and assures that materials, tools, equipment, and stock are available. Works along with aircraft mechanics and specialist personnel performing journeyman work as required.
Insures that assigned personnel are fully utilized and work is accomplished in accordance with established time frames and priorities. Checks work in progress and/or upon completion for compliance with the supervisor's instructions, appropriate technical orders, etc. Serves as a technical advisor by answering questions regarding appropriate procedures, policies, written instructions and other directives. Ensures that safety, housekeeping, security and other environmental rules are followed.
Advises the supervisor of overall work operations, status and progress of work, causes for delays, problems encountered, and individual performance (e.g., additional on-the-job training requirements for individual employees). As requested by the supervisor, provides functional planning for the inspection docks. On a daily basis, recommends adjustments in work schedules to provide optimum utilization of personnel in support of functional requirements.
Performs other duties as assigned.
Requirements
Conditions of employment
GENERAL EXPERIENCE is experience or training that has provided the candidate with sufficient knowledge to complete the work of this occupational series. Experience or training which demonstrates the candidates ability to lead other technicians engaged in the duties performed by this occupational series.
SPECIALIZED EXPERIENCE is experience which is directly related to the position to be filled and which has equipped you with the particular knowledge, skills and abilities to successfully perform the duties of this position.
WL-10 - Must have at least 24 months of experience or training installing, adjusting, aligning, troubleshooting and functionally testing the various major and minor mechanical and pneudraulic systems on an aircraft during overhaul or modification. Experience coordinating the work of other mechanics, and scheduling maintenance to ensure completion of critical actions and optimum workflow. Must have the ability to instruct lower graded mechanics, military and other personnel in the disassembly and re-assembly of crash damaged engines, transmissions, gearboxes, hydraulic components, and fuel controls sufficient for the exhibit to be returned to its shipping container. In addition to the journeyman level knowledge, experience which demonstrates the ability to plan, organize, and lead the work of others in fields directly related the repair function of this occupational series. Must have the ability to perform administrative functions; to read and interpret a variety of technical publications used in the repair of supported equipment. The ability to provide guidance to others in work related directly to this occupational series.
EXPERIENCE REQUIREMENTS:
Resume must have complete dates and hours worked per week for each occurrence of both civilian and military employment (Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) Use of year only will result in disqualification. The duties listed must fully substantiate -in your own words- that you meet the minimum requirements and specialized experience listed above, in detail; otherwise, you will not be considered qualified for this position.
Length of time is not of itself qualifying. Your experience will be evaluated on the basis of duties performed. Your record of experience and/or training must show possession of the following knowledge, skills and abilities needed to fully perform the duties of the position:
- Knowledge of the makeup, operation, and installation of a variety of aircraft systems and assemblies. Knowledge in determining when new assemblies and/or systems should be installed or repaired through replacement of new parts or components. Knowledge of the types and extent of mechanical adjustments and alignments. Skill in removing, replacing, and adjusting various systems and assemblies, as well as, associated components and parts. Knowledge and skill in using precision test equipment, technical data, schematics, wiring diagrams, mathematical formulae, common hand tools, jigs, templates, and gauges.
Additional information
- If you are a current Federal employee or former Federal employee, you must submit a copy of your latest SF-50 "Notification of Personnel Action" and/or a copy of the SF-50. You may submit your most recent performance appraisal.
- The National Guard is exempt from the Veterans Preference Act. Submission of a copy of your DD-214 is not required unless you are hired for technician position.
- If you are a male applicant who was born after 12/31/59 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
- Direct Deposit Program: If selected for technician position with the Alaska National Guard, you will be required to participate in the Direct Deposit Program. (Salary will be automatically deposited to bank/credit union account).
- Military Bonuses And Student Loan Repayment Program: If you are selected for this position, you should always check with your servicing incentive manager (AKARNG - J1 or AKANG - Retention Office) to verify how accepting this position will affect your entitlement prior to considering an offer of employment.
- Trial Period: As a condition of employment for accepting this position, you will be required to serve a 2-year trial period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider:
On a regular and recurring basis, leads three or more aircraft mechanics, crew chiefs, and specialist personnel performing work in the inspection docks.
Monitors the work of assigned personnel, sets the pace, passes along assignments, and assures that materials, tools, equipment, and stock are available. Works along with aircraft mechanics and specialist personnel performing journeyman work as required.
Insures that assigned personnel are fully utilized and work is accomplished in accordance with established time frames and priorities. Checks work in progress and/or upon completion for compliance with the supervisor's instructions, appropriate technical orders, etc. Serves as a technical advisor by answering questions regarding appropriate procedures, policies, written instructions and other directives. Ensures that safety, housekeeping, security and other environmental rules are followed.
Advises the supervisor of overall work operations, status and progress of work, causes for delays, problems encountered, and individual performance (e.g., additional on-the-job training requirements for individual employees). As requested by the supervisor, provides functional planning for the inspection docks. On a daily basis, recommends adjustments in work schedules to provide optimum utilization of personnel in support of functional requirements.
Performs other duties as assigned.
Requirements
Conditions of employment
- Alaska Air National Guard membership is required.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a trial period.
- U.S. Citizenship and Secret Clearance is required.
- Bargaining Unit: Bargaining
- APPOINTMENT FACTORS: Excepted/Enlisted in the Alaska Air National Guard.
- MILITARY GRADE REQUIREMENT: Due to the nature of this position, the minimum and maximum military grade of this position is Technical Sergeant (TSgt/E-6).
- You will be required to serve a 2-year trial period during which we will evaluate your fitness and whether your continued employment advances the public interest.
- Supervisors Desirables: HSC Dock Controller Experience; AFSC 2A5X1; C-17 Maintenance Experience; C-17 Engine Run Qualification; C-17 Tow Supervisor; C-17 APU Run Qualification.
GENERAL EXPERIENCE is experience or training that has provided the candidate with sufficient knowledge to complete the work of this occupational series. Experience or training which demonstrates the candidates ability to lead other technicians engaged in the duties performed by this occupational series.
SPECIALIZED EXPERIENCE is experience which is directly related to the position to be filled and which has equipped you with the particular knowledge, skills and abilities to successfully perform the duties of this position.
WL-10 - Must have at least 24 months of experience or training installing, adjusting, aligning, troubleshooting and functionally testing the various major and minor mechanical and pneudraulic systems on an aircraft during overhaul or modification. Experience coordinating the work of other mechanics, and scheduling maintenance to ensure completion of critical actions and optimum workflow. Must have the ability to instruct lower graded mechanics, military and other personnel in the disassembly and re-assembly of crash damaged engines, transmissions, gearboxes, hydraulic components, and fuel controls sufficient for the exhibit to be returned to its shipping container. In addition to the journeyman level knowledge, experience which demonstrates the ability to plan, organize, and lead the work of others in fields directly related the repair function of this occupational series. Must have the ability to perform administrative functions; to read and interpret a variety of technical publications used in the repair of supported equipment. The ability to provide guidance to others in work related directly to this occupational series.
EXPERIENCE REQUIREMENTS:
Resume must have complete dates and hours worked per week for each occurrence of both civilian and military employment (Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) Use of year only will result in disqualification. The duties listed must fully substantiate -in your own words- that you meet the minimum requirements and specialized experience listed above, in detail; otherwise, you will not be considered qualified for this position.
Length of time is not of itself qualifying. Your experience will be evaluated on the basis of duties performed. Your record of experience and/or training must show possession of the following knowledge, skills and abilities needed to fully perform the duties of the position:
- Knowledge of the makeup, operation, and installation of a variety of aircraft systems and assemblies. Knowledge in determining when new assemblies and/or systems should be installed or repaired through replacement of new parts or components. Knowledge of the types and extent of mechanical adjustments and alignments. Skill in removing, replacing, and adjusting various systems and assemblies, as well as, associated components and parts. Knowledge and skill in using precision test equipment, technical data, schematics, wiring diagrams, mathematical formulae, common hand tools, jigs, templates, and gauges.
Additional information
- If you are a current Federal employee or former Federal employee, you must submit a copy of your latest SF-50 "Notification of Personnel Action" and/or a copy of the SF-50. You may submit your most recent performance appraisal.
- The National Guard is exempt from the Veterans Preference Act. Submission of a copy of your DD-214 is not required unless you are hired for technician position.
- If you are a male applicant who was born after 12/31/59 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
- Direct Deposit Program: If selected for technician position with the Alaska National Guard, you will be required to participate in the Direct Deposit Program. (Salary will be automatically deposited to bank/credit union account).
- Military Bonuses And Student Loan Repayment Program: If you are selected for this position, you should always check with your servicing incentive manager (AKARNG - J1 or AKANG - Retention Office) to verify how accepting this position will affect your entitlement prior to considering an offer of employment.
- Trial Period: As a condition of employment for accepting this position, you will be required to serve a 2-year trial period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider:
- your performance and conduct;
- the needs and interests of the agency;
- whether your continued employment would advance organizational goals of the agency or the Government; and
- whether your continued employment would advance the efficiency of the Federal service.
group id: DOAF
