Today
Secret
Unspecified
Unspecified
Construction/Facilities
Buckley AFB, CO (On-Site/Office)
Duties
Help
- Plans and lays out work from blueprints, sketches, drawings, specifications, and work orders in the construction and maintenance of installation facilities.
- Develops patterns, cuts, forms, joins, assembles, and installs items and systems which have combined straightened curved edges or irregular curves, angles, and planes. Uses complicated shop mathematics to calculate irregular curves, angles, and pitch.
- Performs masonry tasks involved in the maintenance, repair, alteration, and construction of interior and exterior surfaces and structures. Lays bricks, firebricks, cement/glass blocks, tile, terra cotta, and artificial and natural stones.
- Independently applies skilled methods, techniques, and advanced shop mathematics to construct, install,repair, and modify a wide variety of structures.
- Makes new keys from duplications, impressions, and key codes from a variety of key blanks.
- Modifies and reworks locking devices to accomplish special security objectives designed to work inconjunction with other components and equipment to form a complete security or surveillance system.
Requirements
Help
Conditions of employment
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-4700 General Maintenance & Operations Work Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of the position without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of carpentry and sheet metal work methods and techniques, masonry techniques when using brick, block, and stone, sign making construction and standards, and master key systems; and internal structure and operating characteristics of a wide range of makes, models, and types of common mechanical locking mechanisms and of their working interrelationship with related components comprising the locking system of the security units in which they are installed in order to select methods used in neutralizing, troubleshooting, and repairing the locking mechanisms.
2. Knowledge of safety regulations, practices, and procedures and environmental standards and requirements; and regulations, procedures, and policies related to records maintenance and documentation.
3. Knowledge of advanced shop mathematics to plan, compute, and lay out more complex projects.
4. Skill in cutting and shaping to complete corners; constructing, installing, repairing, and modifying structures; formulating plans and templates involving straight and curved edges or irregular curves, angles, and planes; developing patterns to include geometric projection and triangulation; setting-up, operating, and maintaining a variety of precision equipment and power and hand tools/equipment; and fabricating complex items from a variety of materials, such as galvanized or stainless steel, black iron, aluminum, copper sheet, magnesium, honeycomb material, and alloys.
5. Ability to inspect and evaluate structural damage to sheet metal systems sufficient to plan and accomplish repairs; produce finished products with precise fits, accurate dimensions, structural soundness, and acceptable appearance; and perform decorative brickwork through placement of brick of different colors to create various designs and patterns, and perform visual and operational checks and use dexterity and coordination between hands and eyes to remove broken keys from keyways and open standard locks.
6. Ability to read and interpret complex blueprints, diagrams, sketches, and technical specifications; and communicate effectively, both orally and in writing
Physical Effort: The work requires considerable bending, kneeling, standing, and stooping. On-site work typically requires crawling, climbing on ladders, scaffolds, and roof tops. Work encompasses strenuous physical exertion when bending and shaping the more complex items in handling larger and bulkier material. Requires physical effort which includes prolonged standing on production lines; climbing up and down ladders and scaffolds; working in cramped and awkward positions while installing items; and reaching, lifting, and bending while using hand and powered tools in uncomfortable positions for extended periods. Is frequently required to perform heavy lifting up to 90 pounds in carrying bricks, block, stone, mortar, cement, security containers, and sand.
Working Conditions: Works inside shops and outside at job sites. In shops, is exposed to moderate or high noise levels from operating machinery, sawdust in the air, glue fumes, and hazards associated with woodworking and related power equipment. At job sites, may be exposed to weather conditions and hazards of working on and around scaffolds and ladders and are subject to cuts, bruises, burns, and contusions. May work in confined areas, such as crawl spaces and attics that may be dusty and dirty. Uses protective devices such as ear plugs, safety glasses, respirators, and gloves.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here .
If you have questions regarding this announcement and have hearing or speech difficulties click here .
Help
- Plans and lays out work from blueprints, sketches, drawings, specifications, and work orders in the construction and maintenance of installation facilities.
- Develops patterns, cuts, forms, joins, assembles, and installs items and systems which have combined straightened curved edges or irregular curves, angles, and planes. Uses complicated shop mathematics to calculate irregular curves, angles, and pitch.
- Performs masonry tasks involved in the maintenance, repair, alteration, and construction of interior and exterior surfaces and structures. Lays bricks, firebricks, cement/glass blocks, tile, terra cotta, and artificial and natural stones.
- Independently applies skilled methods, techniques, and advanced shop mathematics to construct, install,repair, and modify a wide variety of structures.
- Makes new keys from duplications, impressions, and key codes from a variety of key blanks.
- Modifies and reworks locking devices to accomplish special security objectives designed to work inconjunction with other components and equipment to form a complete security or surveillance system.
Requirements
Help
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- This posn is subject to provisions of the DoD Priority Placement Program
- Disclosure of Political Appointments. Direct Deposit: All federal employees are required to have direct deposit.
- The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required for the position.
- Shift work may be required.
- Will be required to train/guide lower graded (or other trades) military/civilian employees.
- May be required to be certified for working with and/or removing hazardous material.
- The employee may be required to work other than normal duty hours, which may include evenings, weekends, and/or holidays.
- Emergency overtime may be required.
- Maintains bench stock levels of parts, materials, tools, and equipment at prescribed levels.
- Uses and maintains tools appropriate for each task being completed. Informs supervisor on the need for replacement tools as needed.
- Maintains records and documents action. Initiates or annotates forms or reports, such as Operator's Inspection Guide and Trouble Report, Temporary Issue Receipt Form, and completes daily time card for accurate labor accounting.
- Uses plotters, vinyl cutters, printers, computer generated sign software, and a variety of hand tools to perform sign making duties as required.
- Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.
- Must be able to obtain and maintain a secret security clearance.
- This position is designated as a key position IAW AFI 36-507. Duties of this position are essential to the accomplishment of wartime/contingency operations.
- Incumbents of key positions must be removed from their military recall status if alternative for filling of the position during an emergency are not available
- This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing.
- Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-4700 General Maintenance & Operations Work Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of the position without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of carpentry and sheet metal work methods and techniques, masonry techniques when using brick, block, and stone, sign making construction and standards, and master key systems; and internal structure and operating characteristics of a wide range of makes, models, and types of common mechanical locking mechanisms and of their working interrelationship with related components comprising the locking system of the security units in which they are installed in order to select methods used in neutralizing, troubleshooting, and repairing the locking mechanisms.
2. Knowledge of safety regulations, practices, and procedures and environmental standards and requirements; and regulations, procedures, and policies related to records maintenance and documentation.
3. Knowledge of advanced shop mathematics to plan, compute, and lay out more complex projects.
4. Skill in cutting and shaping to complete corners; constructing, installing, repairing, and modifying structures; formulating plans and templates involving straight and curved edges or irregular curves, angles, and planes; developing patterns to include geometric projection and triangulation; setting-up, operating, and maintaining a variety of precision equipment and power and hand tools/equipment; and fabricating complex items from a variety of materials, such as galvanized or stainless steel, black iron, aluminum, copper sheet, magnesium, honeycomb material, and alloys.
5. Ability to inspect and evaluate structural damage to sheet metal systems sufficient to plan and accomplish repairs; produce finished products with precise fits, accurate dimensions, structural soundness, and acceptable appearance; and perform decorative brickwork through placement of brick of different colors to create various designs and patterns, and perform visual and operational checks and use dexterity and coordination between hands and eyes to remove broken keys from keyways and open standard locks.
6. Ability to read and interpret complex blueprints, diagrams, sketches, and technical specifications; and communicate effectively, both orally and in writing
Physical Effort: The work requires considerable bending, kneeling, standing, and stooping. On-site work typically requires crawling, climbing on ladders, scaffolds, and roof tops. Work encompasses strenuous physical exertion when bending and shaping the more complex items in handling larger and bulkier material. Requires physical effort which includes prolonged standing on production lines; climbing up and down ladders and scaffolds; working in cramped and awkward positions while installing items; and reaching, lifting, and bending while using hand and powered tools in uncomfortable positions for extended periods. Is frequently required to perform heavy lifting up to 90 pounds in carrying bricks, block, stone, mortar, cement, security containers, and sand.
Working Conditions: Works inside shops and outside at job sites. In shops, is exposed to moderate or high noise levels from operating machinery, sawdust in the air, glue fumes, and hazards associated with woodworking and related power equipment. At job sites, may be exposed to weather conditions and hazards of working on and around scaffolds and ladders and are subject to cuts, bruises, burns, and contusions. May work in confined areas, such as crawl spaces and attics that may be dusty and dirty. Uses protective devices such as ear plugs, safety glasses, respirators, and gloves.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here .
If you have questions regarding this announcement and have hearing or speech difficulties click here .
group id: DODAF
