Today
Secret
Unspecified
Unspecified
Engineering - Systems
Cheyenne, WY (On-Site/Office)
Duties
The primary purpose of the position is to provide technical expertise to maintain and certify Air traffic Control and Landing Systems (ATCALS). This includes performing investigation, analysis, diagnosis, testing, tuning, correction, optimization, alignment, and verification/certification to ensure continuous and reliable operation of air traffic control and landing and communication systems.
1) Certifies assigned systems and sub-systems to ensure compliance with USAF and Federal Aviation Administration (FAA), established standards and safety requirements.
2) Installs, modifies, tests, repairs, overhauls, calibrates, maintains, evaluates, and certifies performance of complex integrated and interfacing electronic systems.
3) Determines when equipment malfunctions warrant shutdown of various systems. Acts as expert technical consultant to determine whether systems are operationally acceptable and safe within the prescribed standards and tolerances for air traffic control and air navigation.
4) Provides technical guidance, training, and assistance to other technicians and conducts on-the-job (OJT) training to apprentices in all phases of work.
5) Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.
** This is NOT an all-inclusive list of duties. **
Requirements
Conditions of employment
KEY REQUIREMENTS:
Open to current active-duty Air Force, Air Force Reserves, and other states' Air National Guard members.
Must submit vMPF Rip, DVR, or CDB with resume
Must become a military member of the Wyoming Air Nat'l Guard before appt.
To inquire about Recruiting into the WY Air National Guard, contact (307) 772-6333 for assistance.
May be required to successfully complete a two-year trial period.
Federal employment suitability as determined by a background investigation.
Must possess AFSC 1C8X3, Radar, Airfield & Weather Systems (RAWS) Specialist
EMPLOYMENT CONDITIONS:
Technicians are paid through Direct Deposit/Electronic Funds Transfer (DD/EFT).
Military Technicians are ineligible for military enlistment, retention, and student loan repayment bonuses.
Acceptance of a Technician position will terminate these military incentives. If you have questions regarding these bonuses/incentives, contact (307) 772-6333 for assistance.
Acceptance of a permanent or indefinite position will cause termination from the Selected Reserve Incentive Program (SRIP) and TRICARE Reserve Select (TRS).
Recruitment/Relocation Incentive IS NOT authorized.
PCS is not authorized in lieu of incentives. If selected, you will be required to relocate at your own expense.
Veteran's preference does not apply to National Guard Technician positions in accordance with Title 32 USC 709(f).
Qualifications
Primary consideration will be made from Areas 1, 2, and 4. If referrals are not made from the target category, subsequent referrals may next be made from Area 6 (if eligible).
Area 1: All permanent and indefinite Wyoming National Guard (NG) WY ANG employees assigned to the 243d Combat Airfield Operations Squadron (CAOS).
Area 2: All permanent and indefinite Wyoming Air National Guard (ANG) T32 Dual Status technicians employed within the Wyoming Air National Guard.
Area 4: All current military members of the Wyoming Air National Guard.
Area 6: Current military service members to include the US Air Force, Air Force Reserves, and other states' Air National Guard units. Must be willing/eligible to join the Wyoming Air National Guard as a military member prior to appointment to position.
TECHNICIAN INFO
Type of Appointment: Permanent
Tenure: Group 1 or 2
Work Schedule: Monday - Friday, 7:00 am - 4:30 pm
FLSA: Exempt
Telework: The duties of this position require primary physical presence. Situational teleworking may be considered on a case-by-case basis.
Technician Position #: 0798523
Military Position #: 1144453
Selecting Official: MSgt Benjamin T. Eckman
MILITARY GRADE
Min: E4/SrA
Max: E6/TSgt
Enlisted applicant's military grade cannot exceed the maximum military grade authorized. Over-grade applicants must provide a written demotion statement of understanding with application, willingness to be administratively reduced in grade (E6/TSgt) if selected for this position. A Demotion Statement of Understanding is located at:
Applicants' under or that over-grade, without a written demotion statement of understanding, will not be considered for this vacancy. Acceptance of this position does not in any way constitute a military promotion.
GENERAL EXPERIENCE
Must possess experience, education or training performing simple mechanical installations and adjustments. Experience which demonstrates the applicant's ability to recognize obvious malfunctions. A good understanding of basic electronic theories and techniques and familiarity with standard electronic components and their use. Tracing circuitry, diagnosing malfunctions and adjusting controls to achieve peak performance. Experience using specific layout and schematic diagrams to construct and package simple devices and subunits of equipment such as power supplies, oscillators, amplifiers, etc. Using advanced methods in a full-range of troubleshooting procedures, techniques, and usage of test-set related equipment. Experience using common hand tools. Experience that demonstrates the ability to follow written instructions.
SPECIALIZED EXPERIENCE:
GS-9 - Must possess at least 1-year specialized experience equivalent to at least the next lower grade (GS-7). Experience, education, or training in installing, testing, and supporting complex electronics equipment, solving technical problems, leading small project teams, and reviewing instructions for the repair, modification and maintenance equipment and related test-set equipment.
GS-11 - Must possess at least 1-year specialized experience equivalent to at least the next lower grade (GS-9). Experience, education, or training in utilizing principles, basic functions, and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.
NOTE: General Requirements and Specialized Experience will be used to determine qualifications for the announced position. Applicants must provide from MM/YYYY - MM/YYYY (e.g., 02/2015 - 03/2017 or Feb 2017 - Mar - 2017) dates and hours worked per week with description of your specialized experience on the resume.
MILITARY REQUIREMENTS: Selected candidates will be required to be in a compatible military grade and assignment prior to the effective date of placement.
Must possess AFSC 1C8X3, Radar, Airfield & Weather Systems (RAWS) Specialist.
DRIVER'S LICENSE:
Must possess a valid state's driver's license.
Education
This job does not have an education qualification requirement.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered, or you are not eligible for appointment in this agency ( )
The Wyoming Military Department's (WYMD) 335, Personnel - General Merit Placement & Promotion Plan, is undergoing revision.
Please do not send/fax/courier/email any applications or resumes to the Wyoming National Guard Human Resource Office, you must apply on-line via . The Human Resource can only process materials received through USA Jobs.
The primary purpose of the position is to provide technical expertise to maintain and certify Air traffic Control and Landing Systems (ATCALS). This includes performing investigation, analysis, diagnosis, testing, tuning, correction, optimization, alignment, and verification/certification to ensure continuous and reliable operation of air traffic control and landing and communication systems.
1) Certifies assigned systems and sub-systems to ensure compliance with USAF and Federal Aviation Administration (FAA), established standards and safety requirements.
2) Installs, modifies, tests, repairs, overhauls, calibrates, maintains, evaluates, and certifies performance of complex integrated and interfacing electronic systems.
3) Determines when equipment malfunctions warrant shutdown of various systems. Acts as expert technical consultant to determine whether systems are operationally acceptable and safe within the prescribed standards and tolerances for air traffic control and air navigation.
4) Provides technical guidance, training, and assistance to other technicians and conducts on-the-job (OJT) training to apprentices in all phases of work.
5) Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.
** This is NOT an all-inclusive list of duties. **
Requirements
Conditions of employment
KEY REQUIREMENTS:
Open to current active-duty Air Force, Air Force Reserves, and other states' Air National Guard members.
Must submit vMPF Rip, DVR, or CDB with resume
Must become a military member of the Wyoming Air Nat'l Guard before appt.
To inquire about Recruiting into the WY Air National Guard, contact (307) 772-6333 for assistance.
May be required to successfully complete a two-year trial period.
Federal employment suitability as determined by a background investigation.
Must possess AFSC 1C8X3, Radar, Airfield & Weather Systems (RAWS) Specialist
EMPLOYMENT CONDITIONS:
Technicians are paid through Direct Deposit/Electronic Funds Transfer (DD/EFT).
Military Technicians are ineligible for military enlistment, retention, and student loan repayment bonuses.
Acceptance of a Technician position will terminate these military incentives. If you have questions regarding these bonuses/incentives, contact (307) 772-6333 for assistance.
Acceptance of a permanent or indefinite position will cause termination from the Selected Reserve Incentive Program (SRIP) and TRICARE Reserve Select (TRS).
Recruitment/Relocation Incentive IS NOT authorized.
PCS is not authorized in lieu of incentives. If selected, you will be required to relocate at your own expense.
Veteran's preference does not apply to National Guard Technician positions in accordance with Title 32 USC 709(f).
Qualifications
Primary consideration will be made from Areas 1, 2, and 4. If referrals are not made from the target category, subsequent referrals may next be made from Area 6 (if eligible).
Area 1: All permanent and indefinite Wyoming National Guard (NG) WY ANG employees assigned to the 243d Combat Airfield Operations Squadron (CAOS).
Area 2: All permanent and indefinite Wyoming Air National Guard (ANG) T32 Dual Status technicians employed within the Wyoming Air National Guard.
Area 4: All current military members of the Wyoming Air National Guard.
Area 6: Current military service members to include the US Air Force, Air Force Reserves, and other states' Air National Guard units. Must be willing/eligible to join the Wyoming Air National Guard as a military member prior to appointment to position.
TECHNICIAN INFO
Type of Appointment: Permanent
Tenure: Group 1 or 2
Work Schedule: Monday - Friday, 7:00 am - 4:30 pm
FLSA: Exempt
Telework: The duties of this position require primary physical presence. Situational teleworking may be considered on a case-by-case basis.
Technician Position #: 0798523
Military Position #: 1144453
Selecting Official: MSgt Benjamin T. Eckman
MILITARY GRADE
Min: E4/SrA
Max: E6/TSgt
Enlisted applicant's military grade cannot exceed the maximum military grade authorized. Over-grade applicants must provide a written demotion statement of understanding with application, willingness to be administratively reduced in grade (E6/TSgt) if selected for this position. A Demotion Statement of Understanding is located at:
Applicants' under or that over-grade, without a written demotion statement of understanding, will not be considered for this vacancy. Acceptance of this position does not in any way constitute a military promotion.
GENERAL EXPERIENCE
Must possess experience, education or training performing simple mechanical installations and adjustments. Experience which demonstrates the applicant's ability to recognize obvious malfunctions. A good understanding of basic electronic theories and techniques and familiarity with standard electronic components and their use. Tracing circuitry, diagnosing malfunctions and adjusting controls to achieve peak performance. Experience using specific layout and schematic diagrams to construct and package simple devices and subunits of equipment such as power supplies, oscillators, amplifiers, etc. Using advanced methods in a full-range of troubleshooting procedures, techniques, and usage of test-set related equipment. Experience using common hand tools. Experience that demonstrates the ability to follow written instructions.
SPECIALIZED EXPERIENCE:
GS-9 - Must possess at least 1-year specialized experience equivalent to at least the next lower grade (GS-7). Experience, education, or training in installing, testing, and supporting complex electronics equipment, solving technical problems, leading small project teams, and reviewing instructions for the repair, modification and maintenance equipment and related test-set equipment.
GS-11 - Must possess at least 1-year specialized experience equivalent to at least the next lower grade (GS-9). Experience, education, or training in utilizing principles, basic functions, and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.
NOTE: General Requirements and Specialized Experience will be used to determine qualifications for the announced position. Applicants must provide from MM/YYYY - MM/YYYY (e.g., 02/2015 - 03/2017 or Feb 2017 - Mar - 2017) dates and hours worked per week with description of your specialized experience on the resume.
MILITARY REQUIREMENTS: Selected candidates will be required to be in a compatible military grade and assignment prior to the effective date of placement.
Must possess AFSC 1C8X3, Radar, Airfield & Weather Systems (RAWS) Specialist.
DRIVER'S LICENSE:
Must possess a valid state's driver's license.
Education
This job does not have an education qualification requirement.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered, or you are not eligible for appointment in this agency ( )
The Wyoming Military Department's (WYMD) 335, Personnel - General Merit Placement & Promotion Plan, is undergoing revision.
Please do not send/fax/courier/email any applications or resumes to the Wyoming National Guard Human Resource Office, you must apply on-line via . The Human Resource can only process materials received through USA Jobs.
group id: DOAF
