Today
Secret
Unspecified
Unspecified
Engineering - Systems
McClellan, CA (On-Site/Office)
Duties
Help
This position is being filled under AcqDemo Direct Hiring Authority (DHA) for non-acquisition positions involving 51% or more of time in direct support of acquisition positions within Business and Technical Management Professional Career path.
As a Electronics Engineer at the NH-0855-3 some of your typical work assignments may include:
Requirements
Help
Conditions of employment
You may qualify at the NH-03, if you fulfill the following qualifications:
A. One year of specialized experience equivalent to the NH-02 or GS-11, grade level in the Federal service as listed below
In addition to meeting qualifications, your application package must reflect the applicable experience to meet the Individual Occupational Requirements for the 0855, series as listed below:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
**NOTE: Failure to provide transcripts will result in you being rated ineligible for this position.
Education
Substitution of education may not be used in lieu of specialized experience for this grade level.
**NOTE: Failure to provide transcripts will result in you being rated ineligible for this position.
Additional information
Other Notes:
Re-employed Annuitant: If you have retired from civilian federal service and you are interested in employment as a re-employed annuitant, information can be found at: Reemployed Annuitants | DCPAS (osd.mil)
Males born after 12-31-59 must be registered or exempt from Selective Service (see Who Needs to Register | Selective Service System : Selective Service System (sss.gov) )
All applicants must meet qualifications and eligibility criteria by the closing date of the announcement.
Help
This position is being filled under AcqDemo Direct Hiring Authority (DHA) for non-acquisition positions involving 51% or more of time in direct support of acquisition positions within Business and Technical Management Professional Career path.
As a Electronics Engineer at the NH-0855-3 some of your typical work assignments may include:
- Participates in a variety of circuit card and system design efforts that require application of electrical engineering techniques.
- Apply advanced circuit card and system design techniques to develop critical subcomponents for large-scale projects.
- Develop and implement design specifications, electronic schematics, Bill of Materials, and PCB layer stack-up and circuit layout.
- Investigate and implement solutions for high-speed data acquisition, data processing systems, radio frequency (RF) transmissions, and digital signal processing algorithms.
- Contributes to a variety of microelectronics-based system designs as part of a multi-engineering team, utilizing advanced electrical and electronics systems engineering principles.
- Lead cross-disciplinary initiatives to design, develop, implement, simulate and validate microcircuit functionalities using advanced electronics design software and laboratory equipment.
- Participate in Technical Interchange Meetings (TIM) with team mates and clients, providing technical and program status.
- Work closely with support contractors and commercial vendors on the development, prototyping, and manufacturing of Printed Circuit Board (PCB) and mechanical enclosure designs.
- Collaborate within a team of designers, engineers and technicians through the entire Microelectronics product life-cycle.
Requirements
Help
Conditions of employment
- Must be a U.S. Citizen
- Selective Service requirements apply. Please visit http://www.sss.gov for more information
- Suitable for Federal employment determined by required background investigation
- Must obtain/maintain Secret security clearance
- Drug Testing Designated position: Yes
- May be required to successfully complete a probationary period
- Financial Disclosure: Not Required
- Fair Labor Standards Act (FLSA): Exempt
- Recruitment/Relocation/Retention Incentive may be authorized at Management's discretion.
You may qualify at the NH-03, if you fulfill the following qualifications:
A. One year of specialized experience equivalent to the NH-02 or GS-11, grade level in the Federal service as listed below
- FPGA Development using VHDL and/or Verilog design tools to perform Synthesis and Simulation
- Evaluating Electronics designs and products using analysis equipment like Power Analyzers, Signal Analyzers, Network Analyzers, Oscilloscopes, and/or GPS Simulators
- Using advanced microelectronics CAD software like Altium, Cadence, or OrCad to design microcircuits, layout PCBs, and simulate system functionality
- Simulating, validating, and/or testing Radio Frequency (RF) electronics and RF Antennas using Anechoic Chambers, CST Studio (or equivalent), Antenna Magus (or equivalent), and/or ADS Software.
In addition to meeting qualifications, your application package must reflect the applicable experience to meet the Individual Occupational Requirements for the 0855, series as listed below:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
**NOTE: Failure to provide transcripts will result in you being rated ineligible for this position.
Education
Substitution of education may not be used in lieu of specialized experience for this grade level.
**NOTE: Failure to provide transcripts will result in you being rated ineligible for this position.
Additional information
Other Notes:
- Direct Deposit of Pay is required.
- Multiple positions may be filled from this announcement.
- The overall salary range listed above is provided for informational purposes as it represents the full range that is applicable to current employees in this occupation/grade; however, a selectee's initial pay is always set below the maximum rate of the range.
- Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Agency's interest.
- Relocation and/or Recruitment incentive may be authorized if determined by the Hiring Manager to be in the best interest of the Agency.
- Telework is available in accordance with DOD Policy basis. Remote work is not authorized.
Re-employed Annuitant: If you have retired from civilian federal service and you are interested in employment as a re-employed annuitant, information can be found at: Reemployed Annuitants | DCPAS (osd.mil)
Males born after 12-31-59 must be registered or exempt from Selective Service (see Who Needs to Register | Selective Service System : Selective Service System (sss.gov) )
All applicants must meet qualifications and eligibility criteria by the closing date of the announcement.
group id: DODAF
